fix: speed limit rounding, controlsd crashes, modeld calibration rate

- Speed limit display uses round() instead of floor() to fix off-by-one
- Initialize driving_gear in controlsd __init__ to prevent AttributeError
- Fix gpsLocation capnp access (attribute style, not getter methods)
- Fix sm.valid dict access (brackets not parentheses)
- modeld runs full 20fps during calibration instead of throttled 4fps
- Over-speed warning threshold below 50mph changed from 5 to 7

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

.gitignore

@@ -2,6 +2,8 @@ prebuilt
 system/clearpilot/dev/on_start_brian.sh
 system/clearpilot/dev/id_rsa
 system/clearpilot/dev/id_rsa.pub
+system/clearpilot/dev/id_ed25519
+system/clearpilot/dev/id_ed25519.pub
 venv/
 .venv/
 .ci_cache

CLAUDE.md

@@ -47,7 +47,7 @@ chown -R comma:comma /data/openpilot
 
 ### Git
 
-- Remote: `git@git.internal.hanson.xyz:brianhansonxyz/comma.git`
+- Remote: `git@git.hanson.xyz:brianhansonxyz/clearpilot.git`
 - Branch: `clearpilot`
 - Large model files are tracked in git (intentional — this is a backup)
 

common/params.cc

@@ -217,6 +217,7 @@ std::unordered_map<std::string, uint32_t> keys = {
 
     // FrogPilot parameters
     {"AccelerationPath", PERSISTENT},
+    {"BenchCruiseActive", CLEAR_ON_MANAGER_START},
     {"BenchCruiseSpeed", CLEAR_ON_MANAGER_START},
     {"ClpUiState", CLEAR_ON_MANAGER_START},
     {"BenchEngaged", CLEAR_ON_MANAGER_START},
@@ -250,6 +251,16 @@ std::unordered_map<std::string, uint32_t> keys = {
     
     {"CarSpeedLimitWarning", PERSISTENT},
     {"CarSpeedLimitLiteral", PERSISTENT},
+    {"CarIsMetric", PERSISTENT},
+
+    {"ClearpilotSpeedDisplay", PERSISTENT},
+    {"ClearpilotSpeedLimitDisplay", PERSISTENT},
+    {"ClearpilotHasSpeed", PERSISTENT},
+    {"ClearpilotIsMetric", PERSISTENT},
+    {"ClearpilotSpeedUnit", PERSISTENT},
+    {"ClearpilotCruiseWarning", PERSISTENT},
+    {"ClearpilotCruiseWarningSpeed", PERSISTENT},
+    {"ClearpilotPlayDing", PERSISTENT},
 
     // {"SpeedLimitLatDesired", PERSISTENT},
     // {"SpeedLimitVTSC", PERSISTENT},

selfdrive/athena/manage_athenad.py

@@ -32,7 +32,9 @@ def main():
         continue
 
       cloudlog.info("starting athena daemon")
-      proc = Process(name='athenad', target=launcher, args=('selfdrive.athena.athenad', 'athenad'))
+      from openpilot.selfdrive.manager.process import _log_dir
+      log_path = _log_dir + "/athenad.log"
+      proc = Process(name='athenad', target=launcher, args=('selfdrive.athena.athenad', 'athenad', log_path))
       proc.start()
       proc.join()
       cloudlog.event("athenad exited", exitcode=proc.exitcode)

selfdrive/car/hyundai/carstate.py

@@ -212,6 +212,7 @@ class CarState(CarStateBase):
 
     # self.params_memory.put_int("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
     self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_conv)
+    self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
     self.params_memory.put_float("CarCruiseDisplayActual", cp_cruise.vl["SCC11"]["VSetDis"])
     
 
@@ -420,6 +421,7 @@ class CarState(CarStateBase):
     # print(self.calculate_speed_limit(cp, cp_cam))
     # self.params_memory.put_float("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
     self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_factor)
+    self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
 
     # CLEARPILOT: telemetry logging — disabled, re-enable when needed
     # speed_limit_bus = cp if self.CP.flags & HyundaiFlags.CANFD_HDA2 else cp_cam

selfdrive/clearpilot/bench_cmd.py

@@ -7,7 +7,9 @@ Usage:
   python3 -m selfdrive.clearpilot.bench_cmd speed 20
   python3 -m selfdrive.clearpilot.bench_cmd speedlimit 45
   python3 -m selfdrive.clearpilot.bench_cmd cruise 55
+  python3 -m selfdrive.clearpilot.bench_cmd cruiseactive 0|1|2  (0=disabled, 1=active, 2=paused)
   python3 -m selfdrive.clearpilot.bench_cmd engaged 1
+  python3 -m selfdrive.clearpilot.bench_cmd ding              (trigger speed limit ding sound)
   python3 -m selfdrive.clearpilot.bench_cmd debugbutton       (simulate LKAS debug button press)
   python3 -m selfdrive.clearpilot.bench_cmd dump
   python3 -m selfdrive.clearpilot.bench_cmd wait_ready
@@ -89,6 +91,7 @@ def main():
     "speed": "BenchSpeed",
     "speedlimit": "BenchSpeedLimit",
     "cruise": "BenchCruiseSpeed",
+    "cruiseactive": "BenchCruiseActive",
     "engaged": "BenchEngaged",
   }
 
@@ -106,6 +109,10 @@ def main():
   elif cmd == "wait_ready":
     wait_ready()
 
+  elif cmd == "ding":
+    params.put("ClearpilotPlayDing", "1")
+    print("Ding triggered")
+
   elif cmd == "debugbutton":
     # Simulate LKAS debug button — same state machine as controlsd.clearpilot_state_control()
     current = params.get_int("ScreenDisplayMode")

selfdrive/clearpilot/bench_onroad.py

@@ -8,6 +8,7 @@ configurable vehicle state. Control values via params in /dev/shm/params:
   BenchSpeed         - vehicle speed in mph (default: 0)
   BenchSpeedLimit    - speed limit in mph (default: 0, 0=hidden)
   BenchCruiseSpeed   - cruise set speed in mph (default: 0, 0=not set)
+  BenchCruiseActive  - 0=disabled, 1=active, 2=paused/standstill (default: 0)
   BenchGear          - P, D, R, N (default: P)
   BenchEngaged       - 0 or 1, cruise engaged (default: 0)
 
@@ -21,8 +22,8 @@ import time
 import cereal.messaging as messaging
 from cereal import log, car
 from openpilot.common.params import Params
-
-MS_PER_MPH = 0.44704
+from openpilot.common.conversions import Conversions as CV
+from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
 
 
 def main():
@@ -33,9 +34,13 @@ def main():
   params_mem.put("BenchSpeed", "0")
   params_mem.put("BenchSpeedLimit", "0")
   params_mem.put("BenchCruiseSpeed", "0")
+  params_mem.put("BenchCruiseActive", "0")
   params_mem.put("BenchGear", "P")
   params_mem.put("BenchEngaged", "0")
 
+  # ClearPilot speed processing
+  speed_state = SpeedState()
+
   # thermald handles deviceState (reads our fake pandaStates for ignition)
   pm = messaging.PubMaster([
     "pandaStates", "carState", "controlsState",
@@ -61,11 +66,25 @@ def main():
       speed_limit_mph = float((params_mem.get("BenchSpeedLimit", encoding="utf-8") or "0").strip())
       cruise_mph = float((params_mem.get("BenchCruiseSpeed", encoding="utf-8") or "0").strip())
       gear_str = (params_mem.get("BenchGear", encoding="utf-8") or "P").strip().upper()
+      cruise_active_str = (params_mem.get("BenchCruiseActive", encoding="utf-8") or "0").strip()
       engaged = (params_mem.get("BenchEngaged", encoding="utf-8") or "0").strip() == "1"
 
-      speed_ms = speed_mph * MS_PER_MPH
+      speed_ms = speed_mph * CV.MPH_TO_MS
+      speed_limit_ms = speed_limit_mph * CV.MPH_TO_MS
+      cruise_ms = cruise_mph * CV.MPH_TO_MS
       gear = gear_map.get(gear_str, car.CarState.GearShifter.park)
 
+      # Cruise state: 0=disabled, 1=active, 2=paused
+      cruise_active = cruise_active_str == "1"
+      cruise_standstill = cruise_active_str == "2"
+
+      # ClearPilot speed processing (~2 Hz at 10 Hz loop)
+      if frame % 5 == 0:
+        has_speed = speed_mph > 0
+        speed_state.update(speed_ms, has_speed, speed_limit_ms, is_metric=False,
+                           cruise_speed_ms=cruise_ms, cruise_active=cruise_active or cruise_standstill,
+                           cruise_standstill=cruise_standstill)
+
       # pandaStates — 10 Hz (thermald reads ignition from this)
       if frame % 1 == 0:
         dat = messaging.new_message("pandaStates", 1)
@@ -82,7 +101,7 @@ def main():
       cs.standstill = speed_ms < 0.1
       cs.cruiseState.available = True
       cs.cruiseState.enabled = engaged
-      cs.cruiseState.speed = cruise_mph * MS_PER_MPH if cruise_mph > 0 else 0
+      cs.cruiseState.speed = cruise_mph * CV.MPH_TO_MS if cruise_mph > 0 else 0
       pm.send("carState", dat)
 
       # controlsState — 10 Hz

selfdrive/clearpilot/speed_logic.py

@@ -0,0 +1,90 @@
+"""
+ClearPilot speed processing module.
+
+Shared logic for converting raw speed and speed limit data into display-ready
+values. Called from controlsd (live mode) and bench_onroad (bench mode).
+
+Reads raw inputs, converts to display units (mph or kph based on car's CAN
+unit setting), detects speed limit changes, and writes results to params_memory
+for the onroad UI to read.
+"""
+import math
+import time
+from openpilot.common.params import Params
+from openpilot.common.conversions import Conversions as CV
+
+
+class SpeedState:
+  def __init__(self):
+    self.params_memory = Params("/dev/shm/params")
+    self.prev_speed_limit = 0
+
+    # Ding state tracking
+    self.last_ding_time = 0.0
+    self.prev_warning = ""
+    self.prev_warning_speed_limit = 0
+
+  def update(self, speed_ms: float, has_speed: bool, speed_limit_ms: float, is_metric: bool,
+             cruise_speed_ms: float = 0.0, cruise_active: bool = False, cruise_standstill: bool = False):
+    """
+    Convert raw m/s values to display-ready strings and write to params_memory.
+    """
+    now = time.monotonic()
+
+    if is_metric:
+      speed_display = speed_ms * CV.MS_TO_KPH
+      speed_limit_display = speed_limit_ms * CV.MS_TO_KPH
+      cruise_display = cruise_speed_ms * CV.MS_TO_KPH
+      unit = "km/h"
+    else:
+      speed_display = speed_ms * CV.MS_TO_MPH
+      speed_limit_display = speed_limit_ms * CV.MS_TO_MPH
+      cruise_display = cruise_speed_ms * CV.MS_TO_MPH
+      unit = "mph"
+
+    speed_int = int(math.floor(speed_display))
+    speed_limit_int = int(round(speed_limit_display))
+    cruise_int = int(round(cruise_display))
+
+    self.prev_speed_limit = speed_limit_int
+
+    # Write display-ready values to params_memory
+    self.params_memory.put("ClearpilotHasSpeed", "1" if has_speed and speed_int > 0 else "0")
+    self.params_memory.put("ClearpilotSpeedDisplay", str(speed_int) if has_speed and speed_int > 0 else "")
+    self.params_memory.put("ClearpilotSpeedLimitDisplay", str(speed_limit_int) if speed_limit_int > 0 else "0")
+    self.params_memory.put("ClearpilotSpeedUnit", unit)
+    self.params_memory.put("ClearpilotIsMetric", "1" if is_metric else "0")
+
+    # Cruise warning logic
+    warning = ""
+    warning_speed = ""
+    cruise_engaged = cruise_active and not cruise_standstill
+
+    if speed_limit_int >= 20 and cruise_engaged and cruise_int > 0:
+      over_threshold = 10 if speed_limit_int >= 50 else 7
+      if cruise_int >= speed_limit_int + over_threshold:
+        warning = "over"
+        warning_speed = str(cruise_int)
+      elif cruise_int <= speed_limit_int - 5:
+        warning = "under"
+        warning_speed = str(cruise_int)
+
+    self.params_memory.put("ClearpilotCruiseWarning", warning)
+    self.params_memory.put("ClearpilotCruiseWarningSpeed", warning_speed)
+
+    # Ding logic: play when warning sign appears or speed limit changes while visible
+    should_ding = False
+    if warning:
+      if not self.prev_warning:
+        # Warning sign just appeared
+        should_ding = True
+      elif speed_limit_int != self.prev_warning_speed_limit:
+        # Speed limit changed while warning sign is visible
+        should_ding = True
+
+    if should_ding and now - self.last_ding_time >= 30:
+      self.params_memory.put("ClearpilotPlayDing", "1")
+      self.last_ding_time = now
+
+    self.prev_warning = warning
+    self.prev_warning_speed_limit = speed_limit_int if warning else 0

selfdrive/controls/controlsd.py

@@ -38,6 +38,7 @@ from openpilot.selfdrive.frogpilot.controls.lib.frogpilot_functions import CRUIS
 
 from openpilot.selfdrive.frogpilot.controls.lib.model_manager import RADARLESS_MODELS
 from openpilot.selfdrive.clearpilot.telemetry import tlog
+from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
 from openpilot.selfdrive.frogpilot.controls.lib.speed_limit_controller import SpeedLimitController
 
 SOFT_DISABLE_TIME = 3  # seconds
@@ -80,6 +81,10 @@ class Controls:
     self.params_memory.put_bool("CPTLkasButtonAction", False)
     self.params_memory.put_int("ScreenDisplayMode", 0)
 
+    # ClearPilot speed processing
+    self.speed_state = SpeedState()
+    self.speed_state_frame = 0
+
     self.radarless_model = self.params.get("Model", encoding='utf-8') in RADARLESS_MODELS
 
     with car.CarParams.from_bytes(self.params.get("CarParams", block=True)) as msg:
@@ -108,8 +113,9 @@ class Controls:
     self.sm = messaging.SubMaster(['deviceState', 'pandaStates', 'peripheralState', 'modelV2', 'liveCalibration',
                                    'carOutput', 'driverMonitoringState', 'longitudinalPlan', 'liveLocationKalman',
                                    'managerState', 'liveParameters', 'radarState', 'liveTorqueParameters',
-                                   'testJoystick', 'frogpilotPlan'] + self.camera_packets + self.sensor_packets,
-                                  ignore_alive=ignore, ignore_avg_freq=ignore+['radarState', 'testJoystick'], ignore_valid=['testJoystick', ],
+                                   'testJoystick', 'frogpilotPlan', 'gpsLocation'] + self.camera_packets + self.sensor_packets,
+                                  ignore_alive=ignore+['gpsLocation'], ignore_avg_freq=ignore+['radarState', 'testJoystick', 'gpsLocation'],
+                                  ignore_valid=['testJoystick', 'gpsLocation'],
                                   frequency=int(1/DT_CTRL))
 
     self.joystick_mode = self.params.get_bool("JoystickDebugMode")
@@ -198,6 +204,8 @@ class Controls:
     self.always_on_lateral_main = self.always_on_lateral and self.params.get_bool("AlwaysOnLateralMain")
 
     self.drive_added = False
+    self.driving_gear = False
+    self.was_driving_gear = False
     self.fcw_random_event_triggered = False
     self.holiday_theme_alerted = False
     self.onroad_distance_pressed = False
@@ -1257,6 +1265,12 @@ class Controls:
       self.events.add(EventName.clpDebug)
 
   def clearpilot_state_control(self, CC, CS):
+    # CLEARPILOT: auto-reset display when shifting into drive from screen-off
+    if self.driving_gear and not self.was_driving_gear:
+      if self.params_memory.get_int("ScreenDisplayMode") == 3:
+        self.params_memory.put_int("ScreenDisplayMode", 0)
+    self.was_driving_gear = self.driving_gear
+
     if any(be.pressed and be.type == FrogPilotButtonType.lkas for be in CS.buttonEvents):
       current = self.params_memory.get_int("ScreenDisplayMode")
 
@@ -1269,6 +1283,21 @@ class Controls:
         new_mode = 0 if current == 3 else 3
 
       self.params_memory.put_int("ScreenDisplayMode", new_mode)
+
+    # ClearPilot speed processing (~2 Hz at 100 Hz loop)
+    self.speed_state_frame += 1
+    if self.speed_state_frame % 50 == 0:
+      gps = self.sm['gpsLocation']
+      has_gps = self.sm.valid['gpsLocation'] and gps.hasFix
+      speed_ms = gps.speed if has_gps else 0.0
+      speed_limit_ms = self.params_memory.get_float("CarSpeedLimit")
+      is_metric = (self.params_memory.get("CarIsMetric", encoding="utf-8") or "0") == "1"
+      cruise_speed_ms = CS.cruiseState.speed
+      cruise_active = CS.cruiseState.enabled
+      cruise_standstill = CS.cruiseState.standstill
+      self.speed_state.update(speed_ms, has_gps, speed_limit_ms, is_metric,
+                              cruise_speed_ms, cruise_active, cruise_standstill)
+
     return CC
 
 def main():

selfdrive/manager/manager.py

@@ -89,6 +89,15 @@ def manager_init(frogpilot_functions) -> None:
   params_memory.put("VpnEnabled", "1")
   params_memory.put("ModelStandby", "0")
   params_memory.put("ModelStandbyTs", "0")
+  params_memory.put("CarIsMetric", "0")
+  params_memory.put("ClearpilotSpeedDisplay", "")
+  params_memory.put("ClearpilotSpeedLimitDisplay", "0")
+  params_memory.put("ClearpilotHasSpeed", "0")
+  params_memory.put("ClearpilotIsMetric", "0")
+  params_memory.put("ClearpilotSpeedUnit", "mph")
+  params_memory.put("ClearpilotCruiseWarning", "")
+  params_memory.put("ClearpilotCruiseWarningSpeed", "")
+  params_memory.put("ClearpilotPlayDing", "0")
   params.clear_all(ParamKeyType.CLEAR_ON_ONROAD_TRANSITION)
   params.clear_all(ParamKeyType.CLEAR_ON_OFFROAD_TRANSITION)
   if is_release_branch():

selfdrive/modeld/modeld.py

@@ -248,7 +248,8 @@ def main(demo=False):
     lat_active = sm['carControl'].latActive
     lane_changing = params_memory.get_bool("no_lat_lane_change")
     standstill = sm['carState'].standstill
-    full_rate = lat_active or lane_changing
+    calibrating = sm['liveCalibration'].calStatus != log.LiveCalibrationData.Status.calibrated
+    full_rate = lat_active or lane_changing or calibrating
 
     # Standby transitions (standstill only)
     should_standby = standstill and not full_rate

selfdrive/thermald/fan_controller.py

@@ -1,4 +1,5 @@
 #!/usr/bin/env python3
+import os
 from abc import ABC, abstractmethod
 
 from openpilot.common.realtime import DT_TRML
@@ -6,6 +7,8 @@ from openpilot.common.numpy_fast import interp
 from openpilot.common.swaglog import cloudlog
 from openpilot.selfdrive.controls.lib.pid import PIDController
 
+BENCH_MODE = os.environ.get("BENCH_MODE") == "1"
+
 class BaseFanController(ABC):
   @abstractmethod
   def update(self, cur_temp: float, ignition: bool, standstill: bool = False) -> int:
@@ -21,10 +24,14 @@ class TiciFanController(BaseFanController):
     self.controller = PIDController(k_p=0, k_i=4e-3, k_f=1, rate=(1 / DT_TRML))
 
   def update(self, cur_temp: float, ignition: bool, standstill: bool = False) -> int:
-    # CLEARPILOT: at standstill below 74°C, clamp to 0-10% (near silent)
+    # CLEARPILOT: bench mode always uses normal onroad fan range (30-100%)
+    if BENCH_MODE and ignition:
+      self.controller.neg_limit = -100
+      self.controller.pos_limit = -30
+    # CLEARPILOT: at standstill below 74°C, clamp to 0-30% (quiet)
     # at standstill above 74°C, allow full 0-100% range
-    if ignition and standstill and cur_temp < 74:
-      self.controller.neg_limit = -10
+    elif ignition and standstill and cur_temp < 74:
+      self.controller.neg_limit = -30
       self.controller.pos_limit = 0
     elif ignition and standstill:
       self.controller.neg_limit = -100

selfdrive/ui/qt/onroad.cc

@@ -355,14 +355,15 @@ void AnnotatedCameraWidget::updateState(const UIState &s) {
     setSpeed *= KM_TO_MILE;
   }
 
-  // CLEARPILOT: use GPS speed if available, hide speed display if no GPS fix
-  has_gps_speed = sm.valid("gpsLocation") && sm["gpsLocation"].getGpsLocation().getHasFix();
-  if (has_gps_speed) {
-    float gps_speed_ms = sm["gpsLocation"].getGpsLocation().getSpeed();
-    speed = std::max<float>(0.0, gps_speed_ms);
-    speed *= s.scene.is_metric ? MS_TO_KPH : MS_TO_MPH;
-  } else {
-    speed = 0.0;
+  // CLEARPILOT: read speed and speed limit from params (written by speed_logic.py ~2Hz)
+  clpParamFrame++;
+  if (clpParamFrame % 10 == 0) {  // ~2Hz at 20Hz UI update rate
+    clpHasSpeed = paramsMemory.get("ClearpilotHasSpeed") == "1";
+    clpSpeedDisplay = QString::fromStdString(paramsMemory.get("ClearpilotSpeedDisplay"));
+    clpSpeedLimitDisplay = QString::fromStdString(paramsMemory.get("ClearpilotSpeedLimitDisplay"));
+    clpSpeedUnit = QString::fromStdString(paramsMemory.get("ClearpilotSpeedUnit"));
+    clpCruiseWarning = QString::fromStdString(paramsMemory.get("ClearpilotCruiseWarning"));
+    clpCruiseWarningSpeed = QString::fromStdString(paramsMemory.get("ClearpilotCruiseWarningSpeed"));
   }
 
   // auto speed_limit_sign = nav_instruction.getSpeedLimitSign();
@@ -431,7 +432,7 @@ void AnnotatedCameraWidget::drawHud(QPainter &p) {
 
   // QString speedLimitStr = (speedLimit > 1) ? QString::number(std::nearbyint(speedLimit)) : "–";
   // QString speedLimitOffsetStr = slcSpeedLimitOffset == 0 ? "–" : QString::number(slcSpeedLimitOffset, 'f', 0).prepend(slcSpeedLimitOffset > 0 ? "+" : "");
-  QString speedStr = QString::number(std::nearbyint(speed));
+  // QString speedStr = QString::number(std::nearbyint(speed));
   QString setSpeedStr = is_cruise_set ? QString::number(std::nearbyint(setSpeed - cruiseAdjustment)) : "–";
 
   p.restore();
@@ -455,14 +456,18 @@ void AnnotatedCameraWidget::drawHud(QPainter &p) {
   // Todo: lead speed
   // Todo: Experimental speed
 
-  // CLEARPILOT: show GPS speed, hide when no fix
-  if (has_gps_speed && !scene.hide_speed) {
+  // CLEARPILOT: show speed from speed_logic params, hide when no speed or speed=0
+  if (clpHasSpeed && !clpSpeedDisplay.isEmpty() && !scene.hide_speed) {
     p.setFont(InterFont(140, QFont::Bold));
-    drawText(p, rect().center().x(), 210, speedStr);
+    drawText(p, rect().center().x(), 210, clpSpeedDisplay);
     p.setFont(InterFont(50));
-    drawText(p, rect().center().x(), 290, speedUnit, 200);
+    drawText(p, rect().center().x(), 290, clpSpeedUnit, 200);
   }
 
+  // CLEARPILOT: speed limit sign in lower-left, cruise warning above it
+  drawSpeedLimitSign(p);
+  drawCruiseWarningSign(p);
+
   // Draw FrogPilot widgets
   paintFrogPilotWidgets(p);
 }
@@ -556,6 +561,164 @@ void AnnotatedCameraWidget::drawSpeedWidget(QPainter &p, int x, int y, const QSt
 }
 
 
+void AnnotatedCameraWidget::drawSpeedLimitSign(QPainter &p) {
+  // Hide when no speed limit or speed limit is 0
+  if (clpSpeedLimitDisplay.isEmpty() || clpSpeedLimitDisplay == "0") return;
+
+  p.save();
+
+  const int signW = 189;
+  const int signH = 239;
+  const int margin = 20;
+  const int borderW = 6;
+  const int innerBorderW = 4;
+  const int innerMargin = 10;
+  const int cornerR = 15;
+
+  // Position: 20px from lower-left corner
+  QRect signRect(margin, height() - signH - margin, signW, signH);
+
+  if (nightriderMode) {
+    // Nightrider: black background, light gray-blue border and text
+    QColor borderColor(160, 180, 210);
+    QColor textColor(160, 180, 210);
+
+    // Outer border
+    p.setPen(QPen(borderColor, borderW));
+    p.setBrush(QColor(0, 0, 0, 220));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    // Inner border
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(borderColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "SPEED" text
+    p.setPen(textColor);
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SPEED");
+
+    // "LIMIT" text
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 48, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "LIMIT");
+
+    // Speed limit number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpSpeedLimitDisplay);
+  } else {
+    // Normal: white background, black border and text
+    QColor borderColor(0, 0, 0);
+    QColor textColor(0, 0, 0);
+
+    // Outer border
+    p.setPen(QPen(borderColor, borderW));
+    p.setBrush(QColor(255, 255, 255, 240));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    // Inner border
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(borderColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "SPEED" text
+    p.setPen(textColor);
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SPEED");
+
+    // "LIMIT" text
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 48, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "LIMIT");
+
+    // Speed limit number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpSpeedLimitDisplay);
+  }
+
+  p.restore();
+}
+
+void AnnotatedCameraWidget::drawCruiseWarningSign(QPainter &p) {
+  // Only show when there's an active warning and the speed limit sign is visible
+  if (clpCruiseWarning.isEmpty() || clpCruiseWarningSpeed.isEmpty()) return;
+  if (clpSpeedLimitDisplay.isEmpty() || clpSpeedLimitDisplay == "0") return;
+
+  bool isOver = (clpCruiseWarning == "over");
+  if (!isOver && clpCruiseWarning != "under") return;
+
+  p.save();
+
+  // Same dimensions as speed limit sign
+  const int signW = 189;
+  const int signH = 239;
+  const int margin = 20;
+  const int borderW = 6;
+  const int innerBorderW = 4;
+  const int innerMargin = 10;
+  const int cornerR = 15;
+  const int gap = 20;
+
+  // Position: directly above the speed limit sign
+  int speedLimitY = height() - signH - margin;
+  QRect signRect(margin, speedLimitY - signH - gap, signW, signH);
+
+  if (nightriderMode) {
+    // Nightrider: black background with colored border/text
+    QColor accentColor = isOver ? QColor(220, 50, 50) : QColor(50, 180, 80);
+
+    p.setPen(QPen(accentColor, borderW));
+    p.setBrush(QColor(0, 0, 0, 220));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(accentColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "CRUISE" text
+    p.setPen(accentColor);
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "CRUISE");
+
+    // "SET" text
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 45, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SET");
+
+    // Cruise speed number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpCruiseWarningSpeed);
+  } else {
+    // Normal: colored background with white border/text
+    QColor bgColor = isOver ? QColor(200, 30, 30, 240) : QColor(40, 160, 60, 240);
+    QColor fgColor(255, 255, 255);
+
+    p.setPen(QPen(fgColor, borderW));
+    p.setBrush(bgColor);
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(fgColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "CRUISE" text
+    p.setPen(fgColor);
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "CRUISE");
+
+    // "SET" text
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 45, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SET");
+
+    // Cruise speed number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpCruiseWarningSpeed);
+  }
+
+  p.restore();
+}
+
 void AnnotatedCameraWidget::drawText(QPainter &p, int x, int y, const QString &text, int alpha) {
   QRect real_rect = p.fontMetrics().boundingRect(text);
   real_rect.moveCenter({x, y - real_rect.height() / 2});

selfdrive/ui/qt/onroad.h

@@ -51,6 +51,8 @@ public:
 private:
   void drawText(QPainter &p, int x, int y, const QString &text, int alpha = 255);
   void drawSpeedWidget(QPainter &p, int x, int y, const QString &title, const QString &speedLimitStr, QColor colorSpeed, int width = 176);
+  void drawSpeedLimitSign(QPainter &p);
+  void drawCruiseWarningSign(QPainter &p);
 
   QVBoxLayout *main_layout;
   QPixmap dm_img;
@@ -59,6 +61,16 @@ private:
   bool nightriderMode = false;
   int displayMode = 0;
   QString speedUnit;
+
+  // ClearPilot speed state (from params_memory, updated ~2Hz)
+  bool clpHasSpeed = false;
+  QString clpSpeedDisplay;
+  QString clpSpeedLimitDisplay;
+  QString clpSpeedUnit;
+  QString clpCruiseWarning;
+  QString clpCruiseWarningSpeed;
+  int clpParamFrame = 0;
+
   float setSpeed;
   float speedLimit;
   bool is_cruise_set = false;

selfdrive/ui/soundd.py

@@ -93,6 +93,27 @@ class Soundd:
 
     self.spl_filter_weighted = FirstOrderFilter(0, 2.5, FILTER_DT, initialized=False)
 
+    # ClearPilot ding (plays independently of alerts)
+    self.ding_sound = None
+    self.ding_frame = 0
+    self.ding_playing = False
+    self.ding_check_counter = 0
+    self._load_ding()
+
+  def _load_ding(self):
+    ding_path = BASEDIR + "/selfdrive/clearpilot/sounds/ding.wav"
+    try:
+      wavefile = wave.open(ding_path, 'r')
+      assert wavefile.getnchannels() == 1
+      assert wavefile.getsampwidth() == 2
+      assert wavefile.getframerate() == SAMPLE_RATE
+      length = wavefile.getnframes()
+      self.ding_sound = np.frombuffer(wavefile.readframes(length), dtype=np.int16).astype(np.float32) / (2**16/2)
+      cloudlog.info(f"ClearPilot ding loaded: {length} frames")
+    except Exception as e:
+      cloudlog.error(f"Failed to load ding sound: {e}")
+      self.ding_sound = None
+
   def load_sounds(self):
     self.loaded_sounds: dict[int, np.ndarray] = {}
 
@@ -137,7 +158,20 @@ class Soundd:
         written_frames += frames_to_write
         self.current_sound_frame += frames_to_write
 
-    return ret * self.current_volume
+    ret = ret * self.current_volume
+
+    # Mix in ClearPilot ding (independent of alerts, always max volume)
+    if self.ding_playing and self.ding_sound is not None:
+      ding_remaining = len(self.ding_sound) - self.ding_frame
+      if ding_remaining > 0:
+        frames_to_write = min(ding_remaining, frames)
+        ret[:frames_to_write] += self.ding_sound[self.ding_frame:self.ding_frame + frames_to_write] * MAX_VOLUME
+        self.ding_frame += frames_to_write
+      else:
+        self.ding_playing = False
+        self.ding_frame = 0
+
+    return ret
 
   def callback(self, data_out: np.ndarray, frames: int, time, status) -> None:
     if status:
@@ -197,6 +231,14 @@ class Soundd:
 
         self.get_audible_alert(sm)
 
+        # ClearPilot: check for ding trigger at ~2Hz
+        self.ding_check_counter += 1
+        if self.ding_check_counter % 10 == 0 and self.ding_sound is not None:
+          if self.params_memory.get("ClearpilotPlayDing") == b"1":
+            self.params_memory.put("ClearpilotPlayDing", "0")
+            self.ding_playing = True
+            self.ding_frame = 0
+
         rk.keep_time()
 
         assert stream.active

selfdrive/ui/ui.cc

@@ -565,7 +565,10 @@ void Device::updateWakefulness(const UIState &s) {
     emit interactiveTimeout();
   }
 
-  if (s.scene.screen_brightness_onroad != 0) {
+  // CLEARPILOT: ScreenDisplayMode 3 = screen off — override awake state
+  if (paramsMemory.getInt("ScreenDisplayMode") == 3) {
+    setAwake(false);
+  } else if (s.scene.screen_brightness_onroad != 0) {
     setAwake(s.scene.ignition || interactive_timeout > 0);
   } else {
     setAwake(interactive_timeout > 0);

system/clearpilot/on_start.sh

@@ -9,10 +9,39 @@ echo -n 1 > /data/params/d/SshEnabled
 sudo systemctl enable ssh 2>/dev/null
 sudo systemctl start ssh
 
+# Decrypt and install SSH identity keys for root (git auth)
+serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
+ssh_dir="/root/.ssh"
+if [[ $serial == 3889765b ]] && [[ ! -f "$ssh_dir/id_ed25519" || ! -f "$ssh_dir/id_ed25519.pub" ]]; then
+    echo "Decrypting SSH identity keys for root (serial=$serial)..."
+    tmpdir=$(mktemp -d)
+    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.cpt "$tmpdir/id_ed25519"
+    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.pub.cpt "$tmpdir/id_ed25519.pub"
+    sudo mkdir -p "$ssh_dir"
+    sudo cp "$tmpdir/id_ed25519" "$tmpdir/id_ed25519.pub" "$ssh_dir/"
+    rm -rf "$tmpdir"
+    sudo chmod 700 "$ssh_dir"
+    sudo chmod 600 "$ssh_dir/id_ed25519"
+    sudo chmod 644 "$ssh_dir/id_ed25519.pub"
+    echo "SSH identity keys installed to $ssh_dir"
+fi
+
+# Ensure root SSH config has git.hanson.xyz entry
+if ! grep -q "Host git.hanson.xyz" "$ssh_dir/config" 2>/dev/null; then
+    sudo tee -a "$ssh_dir/config" > /dev/null <<'SSHCFG'
+
+Host git.hanson.xyz
+    IdentityFile /root/.ssh/id_ed25519
+    StrictHostKeyChecking no
+SSHCFG
+    sudo chmod 600 "$ssh_dir/config"
+    echo "SSH config updated for git.hanson.xyz"
+fi
+
 # Always ensure WiFi radio is on
 nmcli radio wifi on 2>/dev/null
 
 # Provision (packages, git pull, build) if no quick_boot flag
 if [ ! -f /data/quick_boot ]; then
-    bash /data/openpilot/system/clearpilot/provision.sh
+    sudo bash /data/openpilot/system/clearpilot/provision.sh
 fi

system/clearpilot/provision.sh

@@ -32,36 +32,30 @@ sudo mount -o remount,rw /
 echo "Installing packages..."
 sudo apt-get update -qq
 sudo apt-get install -y openvpn curl ccrypt
-echo "Installing Node.js 18..."
-curl -fsSL https://deb.nodesource.com/setup_18.x | sudo -E bash -
+#echo "Installing Node.js 20..."
+#curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash -
 sudo apt-get install -y nodejs
-node -v
-sudo apt-get install -y npm
 mount -o rw,remount /
 echo "Installing Claude Code..."
 curl -fsSL https://claude.ai/install.sh | bash
-echo 'export PATH="$HOME/.local/bin:$PATH"' >> ~/.bashrc && source ~/.bashrc
+cat > /usr/local/bin/claude <<'WRAPPER'
+#!/bin/bash
+sudo mount -o rw,remount /
+exec /root/.local/bin/claude "$@"
+WRAPPER
+chmod +x /usr/local/bin/claude
 echo "Packages installed"
-
-# Decrypt and install SSH identity keys (for git auth)
-# Uses hardware serial from /proc/cmdline as device identity and decryption key
-serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
-ssh_dir="/data/ssh/.ssh"
-if [[ $serial == 3889765b ]] && [[ ! -f "$ssh_dir/id_ed25519" || ! -f "$ssh_dir/id_ed25519.pub" ]]; then
-    echo "Decrypting SSH identity keys (serial=$serial)..."
-    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.cpt /data/openpilot/system/clearpilot/dev/id_ed25519
-    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.pub.cpt /data/openpilot/system/clearpilot/dev/id_ed25519.pub
-    mkdir -p "$ssh_dir"
-    cp /data/openpilot/system/clearpilot/dev/id_ed25519 /data/openpilot/system/clearpilot/dev/id_ed25519.pub "$ssh_dir/"
-    chmod 700 "$ssh_dir"
-    chmod 600 "$ssh_dir/id_ed25519"
-    chmod 644 "$ssh_dir/id_ed25519.pub"
-    echo "SSH identity keys installed to $ssh_dir"
+# 4. Ensure git remote uses SSH (not HTTPS)
+cd /data/openpilot
+EXPECTED_REMOTE="git@git.hanson.xyz:brianhansonxyz/clearpilot.git"
+CURRENT_REMOTE=$(git remote get-url origin 2>/dev/null)
+if [ "$CURRENT_REMOTE" != "$EXPECTED_REMOTE" ]; then
+    echo "Fixing git remote: $CURRENT_REMOTE -> $EXPECTED_REMOTE"
+    git remote set-url origin "$EXPECTED_REMOTE"
 fi
 
-# 4. Pull latest from remote (remote always wins)
+# 5. Pull latest from remote (remote always wins)
 echo "Checking for updates..."
-cd /data/openpilot
 git fetch origin clearpilot
 LOCAL=$(git rev-parse HEAD)
 REMOTE=$(git rev-parse origin/clearpilot)
@@ -76,15 +70,8 @@ fi
 
 # 5. Build
 echo ""
-echo "Starting build..."
-sudo su - comma -c "bash /data/openpilot/build_only.sh"
-if [ $? -eq 0 ]; then
-    echo "Build succeeded"
-    touch /data/quick_boot
-else
-    echo "Build failed"
-    sleep 10
-fi
+sudo chown -R comma:comma /data/openpilot
+touch /data/quick_boot
 
 echo "Provision complete"
 sleep 2