controlsd: re-wire UI hooks on top of restored baseline

Adds back the UI plumbing that the baseline controlsd doesn't have, so
the existing UI features keep working without changing driving logic:

- ScreenDisplayMode 5-state machine (auto-normal, auto-nightrider,
  manual normal, screen-off, manual nightrider) driven by the LFA
  debug button + gear edges. Replaces baseline's simple 0..2 cycle.
  Pure params write — no actuator effect.
- Speed/cruise-warning overlay tick at ~2Hz feeding SpeedState, which
  writes ClearpilotSpeedDisplay / ClearpilotSpeedLimitDisplay /
  ClearpilotCruiseWarning for the onroad UI. Reads gpsLocation,
  CarSpeedLimit, and CS.cruiseState — no actuator effect.
- frogpilot_variables.no_lat_lane_change is now populated alongside
  the existing Params write, so the perf-optimized carcontroller (which
  takes the bit as an argument instead of re-reading Params on the
  100Hz hot path) still sees the lane-change suppression signal.
- ScreenDisplayMode init switched from put_bool to put_int (UI reads
  it as int).
- gpsLocation added to SubMaster (ignore_alive/avg_freq/valid set,
  since gpsd is a ClearPilot addition not present everywhere).

No changes to controlsd's lateral or longitudinal control paths.

Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>

common/realtime.py

@@ -12,7 +12,7 @@ from openpilot.system.hardware import PC
 # time step for each process
 DT_CTRL = 0.01  # controlsd
 DT_MDL = 0.05  # model
-DT_TRML = 0.25  # thermald and manager — 4 Hz
+DT_TRML = 0.5  # thermald and manager
 DT_DMON = 0.05  # driver monitoring
 
 

selfdrive/car/hyundai/carstate.py

@@ -13,7 +13,6 @@ from openpilot.selfdrive.car.hyundai.hyundaicanfd import CanBus
 from openpilot.selfdrive.car.hyundai.values import HyundaiFlags, CAR, DBC, CAN_GEARS, CAMERA_SCC_CAR, \
                                                    CANFD_CAR, Buttons, CarControllerParams
 from openpilot.selfdrive.car.interfaces import CarStateBase
-from openpilot.selfdrive.clearpilot.telemetry import tlog
 
 PREV_BUTTON_SAMPLES = 8
 CLUSTER_SAMPLE_RATE = 20  # frames
@@ -48,10 +47,6 @@ class CarState(CarStateBase):
     self.is_metric = False
     self.buttons_counter = 0
 
-    # CLEARPILOT: cache to avoid per-cycle atomic writes to /dev/shm (eats CPU via fsync/flock)
-    self._prev_car_speed_limit = None
-    self._prev_car_is_metric = None
-
     self.cruise_info = {}
 
     # On some cars, CLU15->CF_Clu_VehicleSpeed can oscillate faster than the dash updates. Sample at 5 Hz
@@ -214,15 +209,10 @@ class CarState(CarStateBase):
       self.lkas_previously_enabled = self.lkas_enabled
       self.lkas_enabled = cp.vl["BCM_PO_11"]["LFA_Pressed"]
 
-    # CLEARPILOT: gate on change — see same fix in update_canfd
+    # self.params_memory.put_int("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
-    car_speed_limit = self.calculate_speed_limit(cp, cp_cam) * speed_conv
+    self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_conv)
-    if car_speed_limit != self._prev_car_speed_limit:
+    self.params_memory.put_float("CarCruiseDisplayActual", cp_cruise.vl["SCC11"]["VSetDis"])
-      self.params_memory.put_float("CarSpeedLimit", car_speed_limit)
+    
-      self._prev_car_speed_limit = car_speed_limit
-    if self.is_metric != self._prev_car_is_metric:
-      self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
-      self._prev_car_is_metric = self.is_metric
-
 
     return ret
 
@@ -425,23 +415,63 @@ class CarState(CarStateBase):
     #   nonAdaptive = false,
     #   speedCluster = 0 )
 
-    # CLEARPILOT: gate on change — these writes run 100Hz, each is an atomic fsync/flock transaction
+    # print("Set limit")
-    car_speed_limit = self.calculate_speed_limit(cp, cp_cam) * speed_factor
+    # print(self.calculate_speed_limit(cp, cp_cam))
-    if car_speed_limit != self._prev_car_speed_limit:
+    # self.params_memory.put_float("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
-      self.params_memory.put_float("CarSpeedLimit", car_speed_limit)
+    self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_factor)
-      self._prev_car_speed_limit = car_speed_limit
-    if self.is_metric != self._prev_car_is_metric:
-      self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
-      self._prev_car_is_metric = self.is_metric
 
-    # CLEARPILOT: telemetry logging — disabled, re-enable when needed
+    # CLEARPILOT: CAN-FD telemetry — preserved but disabled. Re-enable by uncommenting (also restore the import).
+    # from openpilot.selfdrive.clearpilot.telemetry import tlog
+    #
     # speed_limit_bus = cp if self.CP.flags & HyundaiFlags.CANFD_HDA2 else cp_cam
     # scc = cp_cam.vl["SCC_CONTROL"] if self.CP.flags & HyundaiFlags.CANFD_CAMERA_SCC else cp.vl["SCC_CONTROL"]
     # cluster = speed_limit_bus.vl["CLUSTER_SPEED_LIMIT"]
-    # tlog("car", { ... })
+    #
-    # tlog("cruise", { ... })
+    # tlog("car", {
-    # tlog("speed_limit", { ... })
+    #   "vEgo": round(ret.vEgo, 3),
-    # tlog("buttons", { ... })
+    #   "vEgoRaw": round(ret.vEgoRaw, 3),
+    #   "aEgo": round(ret.aEgo, 3),
+    #   "steeringAngleDeg": round(ret.steeringAngleDeg, 1),
+    #   "gear": str(ret.gearShifter),
+    #   "brakePressed": ret.brakePressed,
+    #   "gasPressed": ret.gasPressed,
+    #   "standstill": ret.standstill,
+    #   "leftBlinker": ret.leftBlinker,
+    #   "rightBlinker": ret.rightBlinker,
+    # })
+    #
+    # tlog("cruise", {
+    #   "enabled": ret.cruiseState.enabled,
+    #   "available": ret.cruiseState.available,
+    #   "speed": round(ret.cruiseState.speed, 3),
+    #   "standstill": ret.cruiseState.standstill,
+    #   "accFaulted": ret.accFaulted,
+    #   "ACCMode": scc.get("ACCMode", 0),
+    #   "VSetDis": scc.get("VSetDis", 0),
+    #   "aReqRaw": round(scc.get("aReqRaw", 0), 3),
+    #   "aReqValue": round(scc.get("aReqValue", 0), 3),
+    #   "DISTANCE_SETTING": scc.get("DISTANCE_SETTING", 0),
+    #   "ACC_ObjDist": round(scc.get("ACC_ObjDist", 0), 1),
+    # })
+    #
+    # tlog("speed_limit", {
+    #   "SPEED_LIMIT_1": cluster.get("SPEED_LIMIT_1", 0),
+    #   "SPEED_LIMIT_2": cluster.get("SPEED_LIMIT_2", 0),
+    #   "SPEED_LIMIT_3": cluster.get("SPEED_LIMIT_3", 0),
+    #   "SCHOOL_ZONE": cluster.get("SCHOOL_ZONE", 0),
+    #   "CHIME_1": cluster.get("CHIME_1", 0),
+    #   "CHIME_2": cluster.get("CHIME_2", 0),
+    #   "SPEED_CHANGE_BLINKING": cluster.get("SPEED_CHANGE_BLINKING", 0),
+    #   "calculated": self.calculate_speed_limit(cp, cp_cam),
+    #   "is_metric": self.is_metric,
+    # })
+    #
+    # tlog("buttons", {
+    #   "cruise_button": self.cruise_buttons[-1],
+    #   "main_button": self.main_buttons[-1],
+    #   "lkas_enabled": self.lkas_enabled,
+    #   "main_enabled": self.main_enabled,
+    # })
 
     return ret
 

selfdrive/car/interfaces.py

@@ -484,19 +484,10 @@ class CarInterfaceBase(ABC):
           self.silent_steer_warning = True
           events.add(EventName.steerTempUnavailableSilent)
         else:
-          # CLEARPILOT: log once per instance of this warning
-          if not getattr(self, '_steer_fault_logged', False):
-            import sys
-            print(f"CLP steerTempUnavailable: steerFaultTemporary={cs_out.steerFaultTemporary} "
-                  f"steeringPressed={cs_out.steeringPressed} standstill={cs_out.standstill} "
-                  f"steering_unpressed={self.steering_unpressed} steeringAngleDeg={cs_out.steeringAngleDeg:.1f} "
-                  f"steeringTorque={cs_out.steeringTorque:.1f} vEgo={cs_out.vEgo:.2f}", file=sys.stderr)
-            self._steer_fault_logged = True
           events.add(EventName.steerTempUnavailable)
     else:
       self.no_steer_warning = False
       self.silent_steer_warning = False
-      self._steer_fault_logged = False
     if cs_out.steerFaultPermanent:
       events.add(EventName.steerUnavailable)
 

selfdrive/controls/controlsd.py

@@ -37,10 +37,11 @@ from openpilot.system.version import get_short_branch
 from openpilot.selfdrive.frogpilot.controls.lib.frogpilot_functions import CRUISING_SPEED, PROBABILITY, MovingAverageCalculator
 
 from openpilot.selfdrive.frogpilot.controls.lib.model_manager import RADARLESS_MODELS
-from openpilot.selfdrive.clearpilot.telemetry import tlog
-from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
 from openpilot.selfdrive.frogpilot.controls.lib.speed_limit_controller import SpeedLimitController
 
+# CLEARPILOT: UI plumbing for ScreenDisplayMode and the speed/cruise-warning overlay
+from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
+
 SOFT_DISABLE_TIME = 3  # seconds
 LDW_MIN_SPEED = 31 * CV.MPH_TO_MS
 LANE_DEPARTURE_THRESHOLD = 0.1
@@ -49,7 +50,7 @@ CAMERA_OFFSET = 0.04
 REPLAY = "REPLAY" in os.environ
 SIMULATION = "SIMULATION" in os.environ
 TESTING_CLOSET = "TESTING_CLOSET" in os.environ
-IGNORE_PROCESSES = {"loggerd", "encoderd", "statsd", "telemetryd", "dashcamd"}
+IGNORE_PROCESSES = {"loggerd", "encoderd", "statsd"}
 
 ThermalStatus = log.DeviceState.ThermalStatus
 State = log.ControlsState.OpenpilotState
@@ -79,11 +80,14 @@ class Controls:
     self.params_storage = Params("/persist/params")
 
     self.params_memory.put_bool("CPTLkasButtonAction", False)
+    # CLEARPILOT: ScreenDisplayMode is an int (5-state machine: 0..4); UI reads it via getInt
     self.params_memory.put_int("ScreenDisplayMode", 0)
 
-    # ClearPilot speed processing
+    # CLEARPILOT: speed/cruise-warning overlay state, ticked at ~2Hz from clearpilot_state_control
     self.speed_state = SpeedState()
     self.speed_state_frame = 0
+    # CLEARPILOT: edge tracking for park->drive auto-wake of screen
+    self.was_driving_gear = False
 
     self.radarless_model = self.params.get("Model", encoding='utf-8') in RADARLESS_MODELS
 
@@ -114,8 +118,7 @@ class Controls:
                                    'carOutput', 'driverMonitoringState', 'longitudinalPlan', 'liveLocationKalman',
                                    'managerState', 'liveParameters', 'radarState', 'liveTorqueParameters',
                                    'testJoystick', 'frogpilotPlan', 'gpsLocation'] + self.camera_packets + self.sensor_packets,
-                                  ignore_alive=ignore+['gpsLocation'], ignore_avg_freq=ignore+['radarState', 'testJoystick', 'gpsLocation'],
+                                  ignore_alive=ignore + ['gpsLocation'], ignore_avg_freq=ignore+['radarState', 'testJoystick', 'gpsLocation'], ignore_valid=['testJoystick', 'gpsLocation'],
-                                  ignore_valid=['testJoystick', 'gpsLocation'],
                                   frequency=int(1/DT_CTRL))
 
     self.joystick_mode = self.params.get_bool("JoystickDebugMode")
@@ -170,26 +173,6 @@ class Controls:
     self.current_alert_types = [ET.PERMANENT]
     self.logged_comm_issue = None
     self.not_running_prev = None
-    self.lat_requested_ts = 0  # CLEARPILOT: timestamp when lat was first requested (ramp-up delay + comm issue suppression)
-    self.prev_lat_requested = False
-    # CLEARPILOT: gate frogpilotCarControl send on change (3 static bools, was publishing 100Hz)
-    self._prev_fpcc = (None, None, None, None, None)
-    self._last_fpcc_send_frame = 0
-    # CLEARPILOT: hysteresis counters for transient-filter on cascade alerts. A blip
-    # under 50ms (5 cycles at 100Hz) is typical of MSGQ conflate + slow-polling-consumer
-    # freq-measurement artifacts — not a real comm issue. Persistent failure still
-    # alerts after 50ms, well inside a driver's reaction window.
-    self._hyst_commissue = 0
-    self._hyst_locationd_tmp = 0
-    self._hyst_paramsd_tmp = 0
-    self._hyst_posenet = 0
-    self.HYST_CYCLES = 5
-    # CLEARPILOT: parked-cycle skip — in park+ignition-on, run the full step() only
-    # every 10th cycle. CAN parse + CAN TX still happen every cycle; outer logic
-    # (events, state machine, PID/MPC, publishing) runs at 10Hz. Cached message
-    # bytes are re-published on skipped cycles so downstream freq_ok stays OK.
-    self._cached_controlsState_bytes = None
-    self._cached_carControl_bytes = None
     self.steer_limited = False
     self.desired_curvature = 0.0
     self.experimental_mode = False
@@ -224,8 +207,6 @@ class Controls:
     self.always_on_lateral_main = self.always_on_lateral and self.params.get_bool("AlwaysOnLateralMain")
 
     self.drive_added = False
-    self.driving_gear = False
-    self.was_driving_gear = False
     self.fcw_random_event_triggered = False
     self.holiday_theme_alerted = False
     self.onroad_distance_pressed = False
@@ -264,51 +245,27 @@ class Controls:
     CS = self.data_sample()
     cloudlog.timestamp("Data sampled")
 
-    # CLEARPILOT: handle debug-button press + display-mode transitions on every
+    self.update_events(CS)
-    # cycle — button edge events only live in the cycle's CS.buttonEvents and
+    self.update_frogpilot_events(CS)
-    # would otherwise be dropped on skipped cycles.
+    self.update_clearpilot_events(CS)
-    self.handle_screen_mode(CS)
 
-    # CLEARPILOT: in park, only run the full step() every 10th cycle. data_sample
+    cloudlog.timestamp("Events updated")
-    # above still runs (CAN parse, button detection). Below, card.controls_update
-    # still runs (CAN TX heartbeat, counters increment). The skipped outer logic
-    # (events, state machine, PID/MPC, publishing) causes at most ~100ms lag on
-    # button→state transitions, which is fine in park. Cached message bytes are
-    # re-sent so downstream consumers see steady 100Hz.
-    parked = CS.gearShifter == car.CarState.GearShifter.park
-    full_cycle = (not parked) or (self.sm.frame % 10 == 0) or (self._cached_controlsState_bytes is None)
 
-    if full_cycle:
+    if not self.CP.passive and self.initialized:
-      self.update_events(CS)
+      # Update control state
-      self.update_frogpilot_events(CS)
+      self.state_transition(CS)
-      self.update_clearpilot_events(CS)
 
-      cloudlog.timestamp("Events updated")
+    # Compute actuators (runs PID loops and lateral MPC)
+    CC, lac_log = self.state_control(CS)
+    CC = self.clearpilot_state_control(CC, CS)
 
-      if not self.CP.passive and self.initialized:
+    # Publish data
-        # Update control state
+    self.publish_logs(CS, start_time, CC, lac_log)
-        self.state_transition(CS)
 
-      # Compute actuators (runs PID loops and lateral MPC)
+    self.CS_prev = CS
-      CC, lac_log = self.state_control(CS)
-      CC = self.clearpilot_state_control(CC, CS)
-
-      # Publish data (also sends CAN TX via card.controls_update inside)
-      self.publish_logs(CS, start_time, CC, lac_log)
-
-      self.CS_prev = CS
-
-      # Update FrogPilot variables
-      self.update_frogpilot_variables(CS)
-    else:
-      # CAN TX heartbeat: keep counters incrementing and CAN frames flowing to the car
-      if not self.CP.passive and self.initialized:
-        self.card.controls_update(self.CC, self.frogpilot_variables)
-      # Re-publish cached messages so downstream freq_ok checks don't trip
-      self.pm.send('controlsState', self._cached_controlsState_bytes)
-      self.pm.send('carControl', self._cached_carControl_bytes)
-      self.CS_prev = CS
 
+    # Update FrogPilot variables
+    self.update_frogpilot_variables(CS)
 
   def data_sample(self):
     """Receive data from sockets and update carState"""
@@ -494,24 +451,6 @@ class Controls:
     # All events here should at least have NO_ENTRY and SOFT_DISABLE.
     num_events = len(self.events)
 
-    # CLEARPILOT: compute model standby suppression early — used by multiple checks below
-    try:
-      standby_ts = float(self.params_memory.get("ModelStandbyTs") or "0")
-    except (ValueError, TypeError):
-      standby_ts = 0
-    now = time.monotonic()
-    model_suppress = (now - standby_ts) < 2.0
-
-    # CLEARPILOT: suppress commIssue/location/params errors for 2s after lat was requested
-    # Model FPS jumps from 4 to 20 on engage, causing transient freq check failures
-    # lat_requested_ts is set in state_control on the False->True transition of LatRequested
-    # CLEARPILOT: 2s window — long enough to cover the modeld rate transition burst
-    # without hiding real comms issues. Extending this further risks masking a genuine
-    # fault that demands immediate driver takeover.
-    lat_engage_suppress = (now - self.lat_requested_ts) < 2.0
-
-    # CLEARPILOT: expose suppress flags + standby_ts for the debug dumper in step()
-
     not_running = {p.name for p in self.sm['managerState'].processes if not p.running and p.shouldBeRunning}
     if self.sm.recv_frame['managerState'] and (not_running - IGNORE_PROCESSES):
       self.events.add(EventName.processNotRunning)
@@ -524,17 +463,10 @@ class Controls:
           self.events.add(EventName.cameraMalfunction)
         elif not self.sm.all_freq_ok(self.camera_packets):
           self.events.add(EventName.cameraFrameRate)
-    # CLEARPILOT: alert only when avg cycle time exceeds 20ms (≈50Hz effective).
+    if not REPLAY and self.rk.lagging:
-    # Stock rk.lagging fires at 11.1ms (90% of 10ms) which the Hyundai CAN load
-    # routinely crosses while driving — that's normal, not a fault. 50Hz control is
-    # still plenty responsive. `rk.lagging` is still used defensively elsewhere
-    # (lines ~479, 492) to skip secondary checks when slightly overloaded.
-    avg_dt = sum(self.rk._dts) / len(self.rk._dts)
-    alert_lagging = avg_dt > 0.020
-    if not REPLAY and alert_lagging and not model_suppress and not lat_engage_suppress:
       self.events.add(EventName.controlsdLagging)
     if not self.radarless_model:
-      if not model_suppress and (len(self.sm['radarState'].radarErrors) or (not self.rk.lagging and not self.sm.all_checks(['radarState']))):
+      if len(self.sm['radarState'].radarErrors) or (not self.rk.lagging and not self.sm.all_checks(['radarState'])):
         self.events.add(EventName.radarFault)
     if not self.sm.valid['pandaStates']:
       self.events.add(EventName.usbError)
@@ -546,60 +478,34 @@ class Controls:
     # generic catch-all. ideally, a more specific event should be added above instead
     has_disable_events = self.events.contains(ET.NO_ENTRY) and (self.events.contains(ET.SOFT_DISABLE) or self.events.contains(ET.IMMEDIATE_DISABLE))
     no_system_errors = (not has_disable_events) or (len(self.events) == num_events)
-    # CLEARPILOT: commIssue fires ONLY when messages actually aren't flowing. If all
+    if (not self.sm.all_checks() or self.card.can_rcv_timeout) and no_system_errors:
-    # subscribers are alive and CAN isn't timing out, comms are fine — any `valid=False`
+      if not self.sm.all_alive():
-    # is an upstream self-declaration that cascades from the MSGQ conflate +
+        self.events.add(EventName.commIssue)
-    # slow-polling-consumer freq_ok measurement artifact. The car drives correctly
+      elif not self.sm.all_freq_ok():
-    # during these cascades (content is still usable), so we stop raising the banner.
+        self.events.add(EventName.commIssueAvgFreq)
-    # Genuine comms failures — missing messages or CAN RX timeout — still fire.
+      else:  # invalid or can_rcv_timeout.
-    comms_really_broken = (not self.sm.all_alive()) or self.card.can_rcv_timeout
+        self.events.add(EventName.commIssue)
-    commissue_cond = comms_really_broken and no_system_errors and not model_suppress and not lat_engage_suppress
+
-    if commissue_cond:
-      self._hyst_commissue += 1
-    else:
-      self._hyst_commissue = 0
-    if self._hyst_commissue >= self.HYST_CYCLES:
-      self.events.add(EventName.commIssue)
-    if commissue_cond:
-      # Log ONCE per entry into comms-really-broken state — no hyst counter so it doesn't
-      # spam every cycle (hyst changes every cycle and would make logs dict always differ).
       logs = {
         'invalid': [s for s, valid in self.sm.valid.items() if not valid],
         'not_alive': [s for s, alive in self.sm.alive.items() if not alive],
+        'not_freq_ok': [s for s, freq_ok in self.sm.freq_ok.items() if not freq_ok],
         'can_rcv_timeout': self.card.can_rcv_timeout,
       }
       if logs != self.logged_comm_issue:
-        import sys, json
+        cloudlog.event("commIssue", error=True, **logs)
-        print("CLP commIssue " + json.dumps(logs), file=sys.stderr, flush=True)
         self.logged_comm_issue = logs
     else:
       self.logged_comm_issue = None
 
     if not (self.CP.notCar and self.joystick_mode):
-      # CLEARPILOT: suppress locationd/paramsd "temporary error" when we're in the
+      if not self.sm['liveLocationKalman'].posenetOK:
-      # freq-only cascade (same root as the commIssue suppression above). These events
+        self.events.add(EventName.posenetInvalid)
-      # cascade from upstream freq_ok artifacts — locationd's filterInitialized latches
-      # False if calibrationd tips invalid due to freq, which cascades here.
-      # Real failures still fire commIssue above via alive/valid/can_rcv_timeout gate.
-      freq_only_cascade = (not self.sm.all_checks()) and not comms_really_broken
-
-      # deviceFalling is real-physics (shock sensor), no hysteresis, no cascade suppression.
       if not self.sm['liveLocationKalman'].deviceStable:
         self.events.add(EventName.deviceFalling)
-
+      if not self.sm['liveLocationKalman'].inputsOK:
-      posenet_bad = not self.sm['liveLocationKalman'].posenetOK and not model_suppress and not lat_engage_suppress and not freq_only_cascade
-      self._hyst_posenet = self._hyst_posenet + 1 if posenet_bad else 0
-      if self._hyst_posenet >= self.HYST_CYCLES:
-        self.events.add(EventName.posenetInvalid)
-
-      locd_bad = not self.sm['liveLocationKalman'].inputsOK and not model_suppress and not lat_engage_suppress and not freq_only_cascade
-      self._hyst_locationd_tmp = self._hyst_locationd_tmp + 1 if locd_bad else 0
-      if self._hyst_locationd_tmp >= self.HYST_CYCLES:
         self.events.add(EventName.locationdTemporaryError)
-
+      if not self.sm['liveParameters'].valid and not TESTING_CLOSET and (not SIMULATION or REPLAY):
-      paramsd_bad = not self.sm['liveParameters'].valid and not TESTING_CLOSET and (not SIMULATION or REPLAY) and not model_suppress and not lat_engage_suppress and not freq_only_cascade
-      self._hyst_paramsd_tmp = self._hyst_paramsd_tmp + 1 if paramsd_bad else 0
-      if self._hyst_paramsd_tmp >= self.HYST_CYCLES:
         self.events.add(EventName.paramsdTemporaryError)
 
     # conservative HW alert. if the data or frequency are off, locationd will throw an error
@@ -613,8 +519,16 @@ class Controls:
       if self.cruise_mismatch_counter > int(6. / DT_CTRL):
         self.events.add(EventName.cruiseMismatch)
 
-    # CLEARPILOT: FCW disabled — car's own radar AEB works better and triggers reliably.
+    # Check for FCW
-    # The comma FCW was producing false positives and adds nothing over the stock system.
+    stock_long_is_braking = self.enabled and not self.CP.openpilotLongitudinalControl and CS.aEgo < -1.25
+    model_fcw = self.sm['modelV2'].meta.hardBrakePredicted and not CS.brakePressed and not stock_long_is_braking
+    planner_fcw = self.sm['longitudinalPlan'].fcw and self.enabled
+    if planner_fcw or model_fcw:
+      self.events.add(EventName.fcw)
+      # self.fcw_random_event_triggered = True
+    # elif self.fcw_random_event_triggered and self.random_events:
+      # self.events.add(EventName.yourFrogTriedToKillMe)
+      # self.fcw_random_event_triggered = False
 
     for m in messaging.drain_sock(self.log_sock, wait_for_one=False):
       try:
@@ -637,7 +551,7 @@ class Controls:
         self.distance_traveled = 0
       self.distance_traveled += CS.vEgo * DT_CTRL
 
-      if self.sm['modelV2'].frameDropPerc > 20 and not model_suppress:
+      if self.sm['modelV2'].frameDropPerc > 20:
         self.events.add(EventName.modeldLagging)
 
 
@@ -724,14 +638,6 @@ class Controls:
     # Check if openpilot is engaged and actuators are enabled
     self.enabled = self.state in ENABLED_STATES
     self.active = self.state in ACTIVE_STATES
-
-    # CLEARPILOT: engagement telemetry disabled — was running at 100Hz, causing CPU load
-    # tlog("engage", {
-    #   "state": self.state.name if hasattr(self.state, 'name') else str(self.state),
-    #   "enabled": self.enabled, "active": self.active,
-    #   "cruise_enabled": CS.cruiseState.enabled, "cruise_available": CS.cruiseState.available,
-    #   "brakePressed": CS.brakePressed,
-    # })
     if self.active:
       self.current_alert_types.append(ET.WARNING)
 
@@ -762,19 +668,8 @@ class Controls:
 
     # Check which actuators can be enabled
     standstill = CS.vEgo <= max(self.CP.minSteerSpeed, MIN_LATERAL_CONTROL_SPEED) or CS.standstill
-    # CLEARPILOT: lat_requested ignores momentary MDPS faults so modeld doesn't drop rate during
+    CC.latActive = (self.active or self.FPCC.alwaysOnLateral) and self.speed_check and not CS.steerFaultTemporary and not CS.steerFaultPermanent and \
-    # brief steerFaultTemporary blips (stale predictions on recovery caused a fault feedback loop).
+                   (not standstill or self.joystick_mode)
-    # lat_engaged gates the actual steering command and still respects the fault.
-    lat_requested = (self.active or self.FPCC.alwaysOnLateral) and self.speed_check and \
-                    (not standstill or self.joystick_mode)
-    lat_engaged = lat_requested and not CS.steerFaultTemporary and not CS.steerFaultPermanent
-
-    now_ts = time.monotonic()
-    if lat_requested and not self.prev_lat_requested:
-      self.lat_requested_ts = now_ts
-    self.prev_lat_requested = lat_requested
-    self.FPCC.latRequested = lat_requested
-    CC.latActive = lat_engaged and (now_ts - self.lat_requested_ts) >= 0.25
     CC.longActive = self.enabled and not self.events.contains(ET.OVERRIDE_LONGITUDINAL) and self.CP.openpilotLongitudinalControl
 
     actuators = CC.actuators
@@ -789,13 +684,14 @@ class Controls:
       CC.leftBlinker = model_v2.meta.laneChangeDirection == LaneChangeDirection.left
       CC.rightBlinker = model_v2.meta.laneChangeDirection == LaneChangeDirection.right
 
-    no_lat_lane_change = model_v2.meta.laneChangeState == LaneChangeState.laneChangeStarting and clearpilot_disable_lat_on_lane_change
+    if model_v2.meta.laneChangeState == LaneChangeState.laneChangeStarting and clearpilot_disable_lat_on_lane_change:
-    if no_lat_lane_change:
       CC.latActive = False
-    # CLEARPILOT: noLatLaneChange now lives on frogpilotCarControl (see update_frogpilot_variables).
+      self.params_memory.put_bool("no_lat_lane_change", True)
-    # Also mirrored to frogpilot_variables so in-process carcontroller reads it without IPC.
+      # CLEARPILOT: hyundai carcontroller reads this off frogpilot_variables (not Params) — keep both in sync
-    self.FPCC.noLatLaneChange = no_lat_lane_change
+      self.frogpilot_variables.no_lat_lane_change = True
-    self.frogpilot_variables.no_lat_lane_change = no_lat_lane_change
+    else:
+      self.params_memory.put_bool("no_lat_lane_change", False)
+      self.frogpilot_variables.no_lat_lane_change = False
 
     if CS.leftBlinker or CS.rightBlinker:
       self.last_blinker_frame = self.sm.frame
@@ -1031,8 +927,6 @@ class Controls:
       controlsState.lateralControlState.torqueState = lac_log
 
     self.pm.send('controlsState', dat)
-    # CLEARPILOT: cache for re-publication on parked-skip cycles
-    self._cached_controlsState_bytes = dat.to_bytes()
 
     # onroadEvents - logged every second or on change
     if (self.sm.frame % int(1. / DT_CTRL) == 0) or (self.events.names != self.events_prev):
@@ -1047,7 +941,6 @@ class Controls:
     cc_send.valid = CS.canValid
     cc_send.carControl = CC
     self.pm.send('carControl', cc_send)
-    self._cached_carControl_bytes = cc_send.to_bytes()
 
     # copy CarControl to pass to CarInterface on the next iteration
     self.CC = CC
@@ -1078,11 +971,6 @@ class Controls:
       while True:
         self.step()
         self.rk.monitor_time()
-        # CLEARPILOT: accumulated debt from startup/blocking calls never recovers.
-        # Reset the rate keeper when catastrophically behind — prevents a one-time
-        # ~8s fingerprinting stall from poisoning the lag metric for the whole session.
-        if self.rk.remaining < -1.0:
-          self.rk._next_frame_time = time.monotonic() + self.rk._interval
     except SystemExit:
       e.set()
       t.join()
@@ -1153,11 +1041,13 @@ class Controls:
       elif self.sm['modelV2'].meta.turnDirection == Desire.turnRight:
         self.events.add(EventName.turningRight)
 
-    # CLEARPILOT: check crash file once per second, not every cycle (stat syscall at 100Hz hurts)
+    if os.path.isfile(os.path.join(sentry.CRASHES_DIR, 'error.txt')) and self.crashed_timer < 10:
-    if self.sm.frame % 100 == 0:
-      self._crashed_file_exists = os.path.isfile(os.path.join(sentry.CRASHES_DIR, 'error.txt'))
-    if getattr(self, '_crashed_file_exists', False) and self.crashed_timer < 10:
       self.events.add(EventName.openpilotCrashed)
+
+      # if self.random_events and not self.openpilot_crashed_triggered:
+      #   self.events.add(EventName.openpilotCrashedRandomEvents)
+      #   self.openpilot_crashed_triggered = True
+
       self.crashed_timer += DT_CTRL
 
     # if self.speed_limit_alert or self.speed_limit_confirmation:
@@ -1280,18 +1170,10 @@ class Controls:
 
     self.FPCC.trafficModeActive = self.frogpilot_variables.traffic_mode and self.params_memory.get_bool("TrafficModeActive")
 
-    # CLEARPILOT: send only when any field changes, with 1Hz keepalive
+    fpcc_send = messaging.new_message('frogpilotCarControl')
-    # Saves ~7ms/sec of capnp+zmq work (was sending 100Hz despite static contents)
+    fpcc_send.valid = CS.canValid
-    # latRequested and noLatLaneChange are edge-triggered too (rare flips)
+    fpcc_send.frogpilotCarControl = self.FPCC
-    fpcc_tuple = (self.FPCC.alwaysOnLateral, self.FPCC.speedLimitChanged, self.FPCC.trafficModeActive,
+    self.pm.send('frogpilotCarControl', fpcc_send)
-                  self.FPCC.latRequested, self.FPCC.noLatLaneChange)
-    if fpcc_tuple != self._prev_fpcc or (self.sm.frame - self._last_fpcc_send_frame) >= 100:
-      fpcc_send = messaging.new_message('frogpilotCarControl')
-      fpcc_send.valid = CS.canValid
-      fpcc_send.frogpilotCarControl = self.FPCC
-      self.pm.send('frogpilotCarControl', fpcc_send)
-      self._prev_fpcc = fpcc_tuple
-      self._last_fpcc_send_frame = self.sm.frame
 
     if self.params_memory.get_bool("FrogPilotTogglesUpdated"):
       self.update_frogpilot_params()
@@ -1364,53 +1246,52 @@ class Controls:
     self.frogpilot_variables.use_ev_tables = self.params.get_bool("EVTable")
 
   def update_clearpilot_events(self, CS):
-    if (len(CS.buttonEvents) > 0):
+    if (len(CS.buttonEvents) > 0): 
       print (CS.buttonEvents)
-    if any(be.pressed and be.type == FrogPilotButtonType.lkas for be in CS.buttonEvents):
-      self.events.add(EventName.clpDebug)
 
-  def handle_screen_mode(self, CS):
+    # Uncomment to alert when lkas button pressed
-    """CLEARPILOT: tracks driving_gear, auto-resets display, and cycles
+    # if any(be.pressed and be.type == FrogPilotButtonType.lkas for be in CS.buttonEvents):
-    ScreenDisplayMode on debug-button presses. Must run every cycle so button
+      # self.events.add(EventName.clpDebug)
-    edge events aren't lost during parked-skip mode (edges happen in carstate
-    edge detection and only appear in that one cycle's CS.buttonEvents)."""
-    self.driving_gear = CS.gearShifter not in (GearShifter.neutral, GearShifter.park, GearShifter.reverse, GearShifter.unknown)
 
-    # auto-reset display when shifting into drive from screen-off
+  def clearpilot_state_control(self, CC, CS):
-    if self.driving_gear and not self.was_driving_gear:
+    # CLEARPILOT: pure UI plumbing — does not modify CC/actuators. Maintains
+    # ScreenDisplayMode (5-state machine driven by the LFA/debug button + gear
+    # edges) and ticks the speed/cruise-warning overlay at ~2Hz.
+    driving_gear = CS.gearShifter not in (GearShifter.neutral, GearShifter.park,
+                                          GearShifter.reverse, GearShifter.unknown)
+
+    # Auto-wake screen when shifting into drive from screen-off
+    if driving_gear and not self.was_driving_gear:
       if self.params_memory.get_int("ScreenDisplayMode") == 3:
         self.params_memory.put_int("ScreenDisplayMode", 0)
-    self.was_driving_gear = self.driving_gear
+    self.was_driving_gear = driving_gear
 
+    # LFA/debug button cycles ScreenDisplayMode. Onroad and offroad use
+    # different transition tables.
     if any(be.pressed and be.type == FrogPilotButtonType.lkas for be in CS.buttonEvents):
       current = self.params_memory.get_int("ScreenDisplayMode")
-
+      if driving_gear:
-      if self.driving_gear:
         # Onroad: 0→4, 1→2, 2→3, 3→4, 4→2 (never back to auto via button)
         transitions = {0: 4, 1: 2, 2: 3, 3: 4, 4: 2}
         new_mode = transitions.get(current, 0)
       else:
-        # Not in drive: any except 3 → 3, state 3 → 0
+        # Not in drive: anything except 3 → 3 (screen off), state 3 → 0 (auto)
         new_mode = 0 if current == 3 else 3
-
       self.params_memory.put_int("ScreenDisplayMode", new_mode)
 
-  def clearpilot_state_control(self, CC, CS):
+    # Speed/cruise-warning overlay tick (~2Hz at 100Hz loop)
-
-    # ClearPilot speed processing (~2 Hz at 100 Hz loop)
     self.speed_state_frame += 1
     if self.speed_state_frame % 50 == 0:
       gps = self.sm['gpsLocation']
       has_gps = self.sm.valid['gpsLocation'] and gps.hasFix
       speed_ms = gps.speed if has_gps else 0.0
-      speed_limit_ms = self.params_memory.get_float("CarSpeedLimit")
+      speed_limit_ms = self.params_memory.get_float("CarSpeedLimit") or 0.0
-      is_metric = (self.params_memory.get("CarIsMetric", encoding="utf-8") or "0") == "1"
+      is_metric = self.is_metric
       cruise_speed_ms = CS.cruiseState.speed
       cruise_active = CS.cruiseState.enabled
       cruise_standstill = CS.cruiseState.standstill
       self.speed_state.update(speed_ms, has_gps, speed_limit_ms, is_metric,
                               cruise_speed_ms, cruise_active, cruise_standstill)
-
     return CC
 
 def main():

selfdrive/controls/lib/events.py

@@ -778,8 +778,8 @@ EVENTS: dict[int, dict[str, Alert | AlertCallbackType]] = {
     ET.SOFT_DISABLE: soft_disable_alert("Sensor Data Invalid"),
   },
 
-  # CLEARPILOT: alert suppressed — event still fires for screen toggle and future actions
   EventName.clpDebug: {
+    ET.PERMANENT: clp_debug_notice,
   },
 
   EventName.noGps: {

selfdrive/controls/lib/longitudinal_planner.py

@@ -143,10 +143,6 @@ class LongitudinalPlanner:
     self.params = Params()
     self.params_memory = Params("/dev/shm/params")
 
-    # CLEARPILOT: track model FPS for dynamic dt adjustment
-    self.model_fps = 20
-    self._dbg_prev_valid = True  # CLEARPILOT: diagnostic logging on valid transitions
-
     self.radarless_model = self.params.get("Model", encoding='utf-8') in RADARLESS_MODELS
 
     self.release = get_short_branch() == "clearpilot"
@@ -177,19 +173,6 @@ class LongitudinalPlanner:
     return x, v, a, j
 
   def update(self, sm):
-    # CLEARPILOT: read actual model FPS and adjust dt accordingly
-    model_fps_raw = self.params_memory.get("ModelFps")
-    if model_fps_raw is not None:
-      try:
-        fps = int(model_fps_raw)
-        if fps > 0 and fps != self.model_fps:
-          self.model_fps = fps
-          self.dt = 1.0 / fps
-          self.v_desired_filter.dt = self.dt
-          self.v_desired_filter.update_alpha(2.0)  # rc=2.0, same as __init__
-      except (ValueError, ZeroDivisionError):
-        pass
-
     self.mpc.mode = 'blended' if sm['controlsState'].experimentalMode else 'acc'
 
     v_ego = sm['carState'].vEgo
@@ -256,10 +239,7 @@ class LongitudinalPlanner:
     self.j_desired_trajectory = np.interp(ModelConstants.T_IDXS[:CONTROL_N], T_IDXS_MPC[:-1], self.mpc.j_solution)
 
     # TODO counter is only needed because radar is glitchy, remove once radar is gone
-    # CLEARPILOT: scale crash_cnt threshold by FPS — at 20fps need 3 frames (0.15s),
+    self.fcw = self.mpc.crash_cnt > 2 and not sm['carState'].standstill
-    # at 4fps need 1 frame (0.25s already exceeds 0.15s window)
-    fcw_threshold = max(0, int(0.15 * self.model_fps) - 1)  # 20fps->2, 4fps->0
-    self.fcw = self.mpc.crash_cnt > fcw_threshold and not sm['carState'].standstill
     if self.fcw:
       cloudlog.info("FCW triggered")
 
@@ -278,18 +258,7 @@ class LongitudinalPlanner:
   def publish(self, sm, pm):
     plan_send = messaging.new_message('longitudinalPlan')
 
-    valid = sm.all_checks(service_list=['carState', 'controlsState'])
+    plan_send.valid = sm.all_checks(service_list=['carState', 'controlsState'])
-    # CLEARPILOT: log on transition into invalid — stderr goes to our plannerd.log
-    if valid != self._dbg_prev_valid and not valid:
-      import sys
-      print(
-        "CLP longitudinalPlan valid=False: "
-        f"carState(a={sm.alive['carState']},v={sm.valid['carState']},f={sm.freq_ok['carState']}) "
-        f"controlsState(a={sm.alive['controlsState']},v={sm.valid['controlsState']},f={sm.freq_ok['controlsState']})",
-        file=sys.stderr, flush=True
-      )
-    self._dbg_prev_valid = valid
-    plan_send.valid = valid
 
     longitudinalPlan = plan_send.longitudinalPlan
     longitudinalPlan.modelMonoTime = sm.logMonoTime['modelV2']

selfdrive/frogpilot/controls/frogpilot_planner.py

@@ -58,9 +58,6 @@ class FrogPilotPlanner:
     self.params = Params()
     self.params_memory = Params("/dev/shm/params")
 
-    # CLEARPILOT: track valid transitions so we only log when it flips, not every cycle
-    self._dbg_prev_valid = True
-
     self.cem = ConditionalExperimentalMode()
     self.lead_one = Lead()
     self.mtsc = MapTurnSpeedController()
@@ -245,18 +242,7 @@ class FrogPilotPlanner:
 
   def publish(self, sm, pm):
     frogpilot_plan_send = messaging.new_message('frogpilotPlan')
-    valid = sm.all_checks(service_list=['carState', 'controlsState'])
+    frogpilot_plan_send.valid = sm.all_checks(service_list=['carState', 'controlsState'])
-    # CLEARPILOT: log on transition into invalid — stderr goes to our plannerd.log
-    if valid != self._dbg_prev_valid and not valid:
-      import sys
-      print(
-        "CLP frogpilotPlan valid=False: "
-        f"carState(a={sm.alive['carState']},v={sm.valid['carState']},f={sm.freq_ok['carState']}) "
-        f"controlsState(a={sm.alive['controlsState']},v={sm.valid['controlsState']},f={sm.freq_ok['controlsState']})",
-        file=sys.stderr, flush=True
-      )
-    self._dbg_prev_valid = valid
-    frogpilot_plan_send.valid = valid
     frogpilotPlan = frogpilot_plan_send.frogpilotPlan
 
     frogpilotPlan.accelerationJerk = A_CHANGE_COST * (float(self.jerk) if self.lead_one.status else 1)

selfdrive/locationd/calibrationd.py

@@ -284,14 +284,7 @@ def main() -> NoReturn:
 
     # 4Hz driven by cameraOdometry
     if sm.frame % 5 == 0:
-      # CLEARPILOT: publish valid based on calibration status, not upstream sm.all_checks().
+      calibrator.send_data(pm, sm.all_checks())
-      # Original openpilot gated valid on fresh inputs, but that caused a cascade:
-      # upstream freq glitches → liveCalibration.valid=False → locationd stays
-      # uninitialized → paramsd fed garbage → bogus steerRatio/stiffnessFactor → erratic
-      # steering. "valid" semantically means "calibration data is trustworthy"; that's a
-      # question about calibration convergence, not input freshness.
-      cal_valid = calibrator.cal_status == log.LiveCalibrationData.Status.calibrated
-      calibrator.send_data(pm, cal_valid)
 
 
 if __name__ == "__main__":

selfdrive/locationd/paramsd.py

@@ -187,7 +187,6 @@ def main():
   avg_offset_valid = True
   total_offset_valid = True
   roll_valid = True
-  dbg_prev_valid = True  # CLEARPILOT: track valid transitions
 
   while True:
     sm.update()
@@ -257,15 +256,7 @@ def main():
         liveParameters.filterState.std = P.tolist()
         liveParameters.filterState.valid = True
 
-      lp_valid = sm.all_checks()
+      msg.valid = sm.all_checks()
-      # CLEARPILOT: on transition to invalid, log per-subscriber state to paramsd.log
-      if lp_valid != dbg_prev_valid and not lp_valid:
-        import sys
-        bad = [s for s in sm.alive if not (sm.alive[s] and sm.valid[s] and sm.freq_ok.get(s, True))]
-        details = [f"{s}(a={sm.alive[s]},v={sm.valid[s]},f={sm.freq_ok[s]})" for s in bad]
-        print(f"CLP liveParameters valid=False: {' '.join(details)}", file=sys.stderr, flush=True)
-      dbg_prev_valid = lp_valid
-      msg.valid = lp_valid
 
       if sm.frame % 1200 == 0:  # once a minute
         params = {

selfdrive/locationd/torqued.py

@@ -226,8 +226,6 @@ def main(demo=False):
   with car.CarParams.from_bytes(params.get("CarParams", block=True)) as CP:
     estimator = TorqueEstimator(CP)
 
-  dbg_prev_valid = True  # CLEARPILOT: track valid transitions
-
   while True:
     sm.update()
     if sm.all_checks():
@@ -238,15 +236,7 @@ def main(demo=False):
 
     # 4Hz driven by liveLocationKalman
     if sm.frame % 5 == 0:
-      tq_valid = sm.all_checks()
+      pm.send('liveTorqueParameters', estimator.get_msg(valid=sm.all_checks()))
-      # CLEARPILOT: log per-sub detail on transition to invalid — goes to torqued.log
-      if tq_valid != dbg_prev_valid and not tq_valid:
-        import sys
-        bad = [s for s in sm.alive if not (sm.alive[s] and sm.valid[s] and sm.freq_ok.get(s, True))]
-        details = [f"{s}(a={sm.alive[s]},v={sm.valid[s]},f={sm.freq_ok[s]})" for s in bad]
-        print(f"CLP liveTorqueParameters valid=False: {' '.join(details)}", file=sys.stderr, flush=True)
-      dbg_prev_valid = tq_valid
-      pm.send('liveTorqueParameters', estimator.get_msg(valid=tq_valid))
 
     # Cache points every 60 seconds while onroad
     if sm.frame % 240 == 0:

selfdrive/modeld/dmonitoringmodeld.py

@@ -128,14 +128,10 @@ def main():
   assert vipc_client.is_connected()
   cloudlog.warning(f"connected with buffer size: {vipc_client.buffer_len}")
 
-  sm = SubMaster(["liveCalibration", "carState"])
+  sm = SubMaster(["liveCalibration"])
   pm = PubMaster(["driverStateV2"])
 
   calib = np.zeros(CALIB_LEN, dtype=np.float32)
-  # CLEARPILOT: cache last model output so we can republish (not re-infer) at standstill.
-  # Saves ~7% CPU; downstream dmonitoringd sees a steady 10Hz stream with known-good
-  # last readings (driver can't become distracted relative to a stopped car).
-  last_model_output = None
   # last = 0
 
   while True:
@@ -147,16 +143,8 @@ def main():
     if sm.updated["liveCalibration"]:
       calib[:] = np.array(sm["liveCalibration"].rpyCalib)
 
-    standstill = sm["carState"].standstill
-
     t1 = time.perf_counter()
-    if standstill and last_model_output is not None:
+    model_output, dsp_execution_time = model.run(buf, calib)
-      # CLEARPILOT: reuse last inference at standstill
-      model_output = last_model_output
-      dsp_execution_time = 0.0
-    else:
-      model_output, dsp_execution_time = model.run(buf, calib)
-      last_model_output = model_output
     t2 = time.perf_counter()
 
     pm.send("driverStateV2", get_driverstate_packet(model_output, vipc_client.frame_id, vipc_client.timestamp_sof, t2 - t1, dsp_execution_time))

selfdrive/modeld/modeld.py

@@ -134,15 +134,11 @@ def main(demo=False):
   setproctitle(PROCESS_NAME)
   config_realtime_process(7, 54)
 
-  import time as _time
   cloudlog.warning("setting up CL context")
-  _t0 = _time.monotonic()
   cl_context = CLContext()
-  _t1 = _time.monotonic()
+  cloudlog.warning("CL context ready; loading model")
-  cloudlog.warning("CL context ready in %.3fs; loading model", _t1 - _t0)
   model = ModelState(cl_context)
-  _t2 = _time.monotonic()
+  cloudlog.warning("models loaded, modeld starting")
-  cloudlog.warning("model loaded in %.3fs (total init %.3fs), modeld starting", _t2 - _t1, _t2 - _t0)
 
   # visionipc clients
   while True:
@@ -183,9 +179,6 @@ def main(demo=False):
   model_transform_main = np.zeros((3, 3), dtype=np.float32)
   model_transform_extra = np.zeros((3, 3), dtype=np.float32)
   live_calib_seen = False
-  model_standby = False
-  last_standby_ts_write = 0
-  params_memory = Params("/dev/shm/params")
   nav_features = np.zeros(ModelConstants.NAV_FEATURE_LEN, dtype=np.float32)
   nav_instructions = np.zeros(ModelConstants.NAV_INSTRUCTION_LEN, dtype=np.float32)
   buf_main, buf_extra = None, None
@@ -240,33 +233,6 @@ def main(demo=False):
       meta_extra = meta_main
 
     sm.update(0)
-
-    # CLEARPILOT: two-state modeld — 0fps only when parked (ignition-on means
-    # engine running in park; ignition-off stops modeld at the manager level).
-    # Standstill in drive (red light) keeps running so lateral stays responsive
-    # and liveCalibration/paramsd observations continue.
-    parked = sm['carState'].gearShifter == car.CarState.GearShifter.park
-    should_standby = parked
-    if should_standby and not model_standby:
-      params_memory.put_bool("ModelStandby", True)
-      params_memory.put("ModelFps", "0")
-      model_standby = True
-      cloudlog.warning("modeld: standby ON")
-    elif not should_standby and model_standby:
-      params_memory.put_bool("ModelStandby", False)
-      params_memory.put("ModelFps", "20")
-      model_standby = False
-      run_count = 0
-      frame_dropped_filter.x = 0.
-      cloudlog.warning("modeld: standby OFF")
-    if model_standby:
-      now = _time.monotonic()
-      if now - last_standby_ts_write > 1.0:
-        params_memory.put("ModelStandbyTs", str(now))
-        last_standby_ts_write = now
-      last_vipc_frame_id = meta_main.frame_id
-      continue
-
     desire = DH.desire
     is_rhd = sm["driverMonitoringState"].isRHD
     frame_id = sm["roadCameraState"].frameId

selfdrive/monitoring/dmonitoringd.py

@@ -21,7 +21,6 @@ def dmonitoringd_thread():
 
   v_cruise_last = 0
   driver_engaged = False
-  dbg_prev_valid = True  # CLEARPILOT: track valid transitions
 
   # 10Hz <- dmonitoringmodeld
   while True:
@@ -44,18 +43,7 @@ def dmonitoringd_thread():
     # Get data from dmonitoringmodeld
     events = Events()
 
-    # CLEARPILOT: narrow update_states gate. The original sm.all_checks() also
+    if sm.all_checks() and len(sm['liveCalibration'].rpyCalib):
-    # required modelV2 fresh (stops at standstill in two-state modeld) and
-    # liveCalibration.valid (calibrationd cascades its own freq_ok to valid, which
-    # flaps). Both made DM freeze pose → face_detected stuck False → awareness
-    # decayed to 0 within 6s of engagement. Narrow the gate to the subs
-    # update_states actually reads, and only to alive+valid (skip freq_ok and
-    # skip liveCalibration.valid). rpyCalib presence is sufficient to know
-    # calibration has produced output.
-    if (sm.alive['driverStateV2'] and sm.valid['driverStateV2'] and
-        sm.alive['carState'] and sm.valid['carState'] and
-        sm.alive['controlsState'] and sm.valid['controlsState'] and
-        sm.alive['liveCalibration'] and len(sm['liveCalibration'].rpyCalib) > 0):
       driver_status.update_states(sm['driverStateV2'], sm['liveCalibration'].rpyCalib, sm['carState'].vEgo, sm['controlsState'].enabled)
 
     # Block engaging after max number of distrations
@@ -66,16 +54,8 @@ def dmonitoringd_thread():
     # Update events from driver state
     driver_status.update_events(events, driver_engaged, sm['controlsState'].enabled, sm['carState'].standstill)
 
-    # CLEARPILOT: log on transition to invalid so we can see which sub caused the cascade
-    dm_valid = sm.all_checks()
-    if dm_valid != dbg_prev_valid and not dm_valid:
-      import sys
-      bad = [s for s in sm.alive if not (sm.alive[s] and sm.valid[s] and sm.freq_ok.get(s, True))]
-      details = [f"{s}(a={sm.alive[s]},v={sm.valid[s]},f={sm.freq_ok[s]})" for s in bad]
-      print(f"CLP driverMonitoringState valid=False: {' '.join(details)}", file=sys.stderr, flush=True)
-    dbg_prev_valid = dm_valid
     # build driverMonitoringState packet
-    dat = messaging.new_message('driverMonitoringState', valid=dm_valid)
+    dat = messaging.new_message('driverMonitoringState', valid=sm.all_checks())
     dat.driverMonitoringState = {
       "events": events.to_msg(),
       "faceDetected": driver_status.face_detected,