fix: speed limit rounding, controlsd crashes, modeld calibration rate

- Speed limit display uses round() instead of floor() to fix off-by-one
- Initialize driving_gear in controlsd __init__ to prevent AttributeError
- Fix gpsLocation capnp access (attribute style, not getter methods)
- Fix sm.valid dict access (brackets not parentheses)
- modeld runs full 20fps during calibration instead of throttled 4fps
- Over-speed warning threshold below 50mph changed from 5 to 7

Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>

.gitignore

@@ -2,6 +2,8 @@ prebuilt
 system/clearpilot/dev/on_start_brian.sh
 system/clearpilot/dev/id_rsa
 system/clearpilot/dev/id_rsa.pub
+system/clearpilot/dev/id_ed25519
+system/clearpilot/dev/id_ed25519.pub
 venv/
 .venv/
 .ci_cache

CANBUS_ISSUE_INVESTIGATE.md

@@ -0,0 +1,29 @@
+# CAN-FD Issues to Investigate
+
+## Cruise Control Desync on Hot Start
+
+### Problem
+When the car is already in cruise control mode before openpilot starts (or before controlsd initializes), pressing the cruise control button causes a desync:
+
+1. Car has active cruise control when openpilot comes online
+2. Driver presses cruise button — car interprets as "toggle off" (cruise was already on)
+3. openpilot interprets it as "engage" (from its perspective, it hasn't seen a cruise enable transition)
+4. Result: car disengages cruise, but openpilot thinks it just engaged lateral mode
+
+### Proposed Fix
+When controlsd first reads carState and discovers `cruiseState.enabled` is already true:
+
+1. Set a flag `cruise_was_active_at_start = True`
+2. While this flag is set, do NOT allow openpilot to transition to engaged state on button press
+3. Only clear the flag after seeing `cruiseState.enabled` go to `False` at least once (a full stop of cruise, not just standstill/pause)
+4. After the first full off cycle, normal engagement logic resumes
+
+### Status
+- Could not reproduce on 2026-04-14 — may require specific timing (openpilot restart while driving with cruise active)
+- Need to capture telemetry data during reproduction to see exact signal sequence
+- Key telemetry groups to watch: `cruise` (enabled, available, ACCMode, VSetDis), `buttons` (cruise_button)
+
+### Relevant Code
+- `selfdrive/controls/controlsd.py` — engagement state machine
+- `selfdrive/car/hyundai/carstate.py` — CAN-FD cruise state parsing
+- `selfdrive/car/interfaces.py` — pcm_enable / cruise state transitions

CLAUDE.md

@@ -47,7 +47,7 @@ chown -R comma:comma /data/openpilot
 
 ### Git
 
-- Remote: `git@git.internal.hanson.xyz:brianhansonxyz/comma.git`
+- Remote: `git@git.hanson.xyz:brianhansonxyz/clearpilot.git`
 - Branch: `clearpilot`
 - Large model files are tracked in git (intentional — this is a backup)
 
@@ -92,6 +92,18 @@ The params system uses a C++ whitelist. Adding a new param name in `manager.py`
 2. Add the default value in `selfdrive/manager/manager.py` in `manager_init()`
 3. Remove `prebuilt`, `common/params.o`, and `common/libcommon.a` to force rebuild
 
+### Memory Params (paramsMemory)
+
+ClearPilot uses memory params (`/dev/shm/params/d/`) for UI toggles that should reset on boot. Key rules:
+
+- **Registration**: Register the key in `common/params.cc` as `PERSISTENT` (same as FrogPilot pattern — the registration flag does NOT control which path the param lives at)
+- **C++ access**: Use `Params{"/dev/shm/params"}` — stored as a class member `paramsMemory` in onroad.h. Do NOT use `Params("/dev/shm/params/d")` — the Params class appends `/d/` internally, so that would resolve to `/dev/shm/params/d/d/`
+- **Python access**: Use `Params("/dev/shm/params")`
+- **Defaults**: Set in `manager_init()` via `Params("/dev/shm/params").put(key, value)`
+- **UI toggles**: Use `ToggleControl` with manual `toggleFlipped` lambda that writes via `Params("/dev/shm/params")`. Do NOT use `ParamControl` for memory params — it reads/writes persistent params only
+- **Current memory params**: `TelemetryEnabled` (default "0"), `VpnEnabled` (default "1"), `ModelStandby` (default "0"), `ScreenDisplayMode`
+- **IMPORTANT — method names differ between C++ and Python**: C++ uses camelCase (`putBool`, `getBool`, `getInt`), Python uses snake_case (`put_bool`, `get_bool`, `get_int`). This is a common source of silent failures — the wrong casing compiles/runs but doesn't work.
+
 ### Building Native (C++) Processes
 
 - SCons is the build system. Static libraries (`common`, `messaging`, `cereal`, `visionipc`) must be imported as SCons objects, not `-l` flags
@@ -482,10 +494,13 @@ Power On
 
 - **Client**: `selfdrive/clearpilot/telemetry.py` — `tlog(group, data)` sends JSON over ZMQ PUSH
 - **Collector**: `selfdrive/clearpilot/telemetryd.py` — diffs against previous state, writes changed values to CSV
-- **Toggle**: `TelemetryEnabled` param, controlled from Debug panel in ClearPilot menu
+- **Toggle**: `TelemetryEnabled` memory param, controlled from Debug panel in ClearPilot menu
 - **Auto-disable**: disabled on every manager start; disabled if `/data` free < 5GB
 - **Hyundai CAN-FD data**: logged from `selfdrive/car/hyundai/carstate.py` `update_canfd()` — groups: `car`, `cruise`, `speed_limit`, `buttons`
+- **GPS data**: logged directly by telemetryd via cereal `gpsLocation` subscription at 1Hz — group: `gps` (latitude, longitude, speed, altitude, bearing, accuracy)
 - **CSV location**: `/data/log2/current/telemetry.csv` (or session directory)
+- **Onroad overlay**: when telemetry enabled, status bar shows temp, fan %, model FPS, and STANDSTILL indicator
+- **Speed limit**: `speed_limit.calculated` is the final computed speed limit value (in vehicle units, MPH when `is_metric=False`). This is the value that will be used for the future speed limit warning chime feature
 
 ### Key Dependencies
 

body/board/SConscript

@@ -121,6 +121,7 @@ def objcopy(source, target, env, for_signature):
     return '$OBJCOPY -O binary %s %s' % (source[0], target[0])
 
 # Common autogenerated includes
+os.makedirs("obj", exist_ok=True)
 git_ver = get_version(BUILDER, BUILD_TYPE)
 with open("obj/gitversion.h", "w") as f:
   f.write(f'const uint8_t gitversion[8] = "{git_ver}";\n')

build_only.sh

@@ -29,6 +29,9 @@ export PYTHONPATH="$BASEDIR"
 sudo chgrp gpu /dev/adsprpc-smd /dev/ion /dev/kgsl-3d0 2>/dev/null
 sudo chmod 660 /dev/adsprpc-smd /dev/ion /dev/kgsl-3d0 2>/dev/null
 
+# Preflight: create dirs git can't track
+source "$BASEDIR/build_preflight.sh"
+
 cd "$BASEDIR/selfdrive/manager"
 rm -f "$BASEDIR/prebuilt"
 

build_preflight.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/bash
+# CLEARPILOT: build preflight — create directories and fix state that
+# git cannot track but the build requires.  Called by build_only.sh and
+# launch_chffrplus.sh before scons runs.
+
+BASEDIR="${BASEDIR:-/data/openpilot}"
+
+# SConscript files write generated headers into obj/ directories at
+# parse time — these must exist before scons starts.
+mkdir -p "$BASEDIR/body/board/obj"
+mkdir -p "$BASEDIR/panda/board/obj"

common/params.cc

@@ -198,8 +198,10 @@ std::unordered_map<std::string, uint32_t> keys = {
     {"TelemetryEnabled", PERSISTENT},
     {"Timezone", PERSISTENT},
     {"TrainingVersion", PERSISTENT},
+    {"ModelStandby", PERSISTENT},
+    {"ModelStandbyTs", PERSISTENT},
     {"UbloxAvailable", PERSISTENT},
-    {"VpnEnabled", CLEAR_ON_MANAGER_START},
+    {"VpnEnabled", PERSISTENT},
     {"UpdateAvailable", CLEAR_ON_MANAGER_START | CLEAR_ON_ONROAD_TRANSITION},
     {"UpdateFailedCount", CLEAR_ON_MANAGER_START},
     {"UpdaterAvailableBranches", PERSISTENT},
@@ -215,6 +217,7 @@ std::unordered_map<std::string, uint32_t> keys = {
 
     // FrogPilot parameters
     {"AccelerationPath", PERSISTENT},
+    {"BenchCruiseActive", CLEAR_ON_MANAGER_START},
     {"BenchCruiseSpeed", CLEAR_ON_MANAGER_START},
     {"ClpUiState", CLEAR_ON_MANAGER_START},
     {"BenchEngaged", CLEAR_ON_MANAGER_START},
@@ -248,6 +251,16 @@ std::unordered_map<std::string, uint32_t> keys = {
     
     {"CarSpeedLimitWarning", PERSISTENT},
     {"CarSpeedLimitLiteral", PERSISTENT},
+    {"CarIsMetric", PERSISTENT},
+
+    {"ClearpilotSpeedDisplay", PERSISTENT},
+    {"ClearpilotSpeedLimitDisplay", PERSISTENT},
+    {"ClearpilotHasSpeed", PERSISTENT},
+    {"ClearpilotIsMetric", PERSISTENT},
+    {"ClearpilotSpeedUnit", PERSISTENT},
+    {"ClearpilotCruiseWarning", PERSISTENT},
+    {"ClearpilotCruiseWarningSpeed", PERSISTENT},
+    {"ClearpilotPlayDing", PERSISTENT},
 
     // {"SpeedLimitLatDesired", PERSISTENT},
     // {"SpeedLimitVTSC", PERSISTENT},

launch_chffrplus.sh

@@ -85,6 +85,9 @@ function launch {
   # write tmux scrollback to a file
   tmux capture-pane -pq -S-1000 > /tmp/launch_log
 
+  # Preflight: create dirs git can't track
+  source "$DIR/build_preflight.sh"
+
   # start manager
   cd selfdrive/manager
   if [ ! -f $DIR/prebuilt ]; then

launch_openpilot.sh

@@ -20,6 +20,9 @@ bash /data/openpilot/system/clearpilot/on_start.sh
 # CLEARPILOT: start VPN monitor (kills previous instances, runs as root)
 sudo bash -c 'nohup /data/openpilot/system/clearpilot/vpn-monitor.sh >> /tmp/vpn-monitor.log 2>&1 &'
 
+# CLEARPILOT: start nice monitor (keeps claude at nice 19)
+sudo bash -c 'nohup /data/openpilot/system/clearpilot/nice-monitor.sh > /dev/null 2>&1 &'
+
 # CLEARPILOT: pass --bench flag through to manager via env var
 if [ "$1" = "--bench" ]; then
   export BENCH_MODE=1

panda/SConscript

@@ -166,6 +166,7 @@ Export('base_project_f4', 'base_project_h7', 'build_project')
 
 
 # Common autogenerated includes
+os.makedirs("board/obj", exist_ok=True)
 with open("board/obj/gitversion.h", "w") as f:
   f.write(f'const uint8_t gitversion[] = "{get_version(BUILDER, BUILD_TYPE)}";\n')
 

selfdrive/athena/manage_athenad.py

@@ -32,7 +32,9 @@ def main():
         continue
 
       cloudlog.info("starting athena daemon")
-      proc = Process(name='athenad', target=launcher, args=('selfdrive.athena.athenad', 'athenad'))
+      from openpilot.selfdrive.manager.process import _log_dir
+      log_path = _log_dir + "/athenad.log"
+      proc = Process(name='athenad', target=launcher, args=('selfdrive.athena.athenad', 'athenad', log_path))
       proc.start()
       proc.join()
       cloudlog.event("athenad exited", exitcode=proc.exitcode)

selfdrive/car/hyundai/carstate.py

@@ -212,6 +212,7 @@ class CarState(CarStateBase):
 
     # self.params_memory.put_int("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
     self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_conv)
+    self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
     self.params_memory.put_float("CarCruiseDisplayActual", cp_cruise.vl["SCC11"]["VSetDis"])
     
 
@@ -420,60 +421,16 @@ class CarState(CarStateBase):
     # print(self.calculate_speed_limit(cp, cp_cam))
     # self.params_memory.put_float("CarSpeedLimitLiteral", self.calculate_speed_limit(cp, cp_cam))
     self.params_memory.put_float("CarSpeedLimit", self.calculate_speed_limit(cp, cp_cam) * speed_factor)
+    self.params_memory.put("CarIsMetric", "1" if self.is_metric else "0")
 
-    # CLEARPILOT: telemetry logging
+    # CLEARPILOT: telemetry logging — disabled, re-enable when needed
-    speed_limit_bus = cp if self.CP.flags & HyundaiFlags.CANFD_HDA2 else cp_cam
+    # speed_limit_bus = cp if self.CP.flags & HyundaiFlags.CANFD_HDA2 else cp_cam
-    scc = cp_cam.vl["SCC_CONTROL"] if self.CP.flags & HyundaiFlags.CANFD_CAMERA_SCC else cp.vl["SCC_CONTROL"]
+    # scc = cp_cam.vl["SCC_CONTROL"] if self.CP.flags & HyundaiFlags.CANFD_CAMERA_SCC else cp.vl["SCC_CONTROL"]
-    cluster = speed_limit_bus.vl["CLUSTER_SPEED_LIMIT"]
+    # cluster = speed_limit_bus.vl["CLUSTER_SPEED_LIMIT"]
-
+    # tlog("car", { ... })
-    tlog("car", {
+    # tlog("cruise", { ... })
-      "vEgo": round(ret.vEgo, 3),
+    # tlog("speed_limit", { ... })
-      "vEgoRaw": round(ret.vEgoRaw, 3),
+    # tlog("buttons", { ... })
-      "aEgo": round(ret.aEgo, 3),
-      "steeringAngleDeg": round(ret.steeringAngleDeg, 1),
-      "gear": str(ret.gearShifter),
-      "brakePressed": ret.brakePressed,
-      "gasPressed": ret.gasPressed,
-      "standstill": ret.standstill,
-      "leftBlinker": ret.leftBlinker,
-      "rightBlinker": ret.rightBlinker,
-    })
-
-    tlog("cruise", {
-      "enabled": ret.cruiseState.enabled,
-      "available": ret.cruiseState.available,
-      "speed": round(ret.cruiseState.speed, 3),
-      "standstill": ret.cruiseState.standstill,
-      "accFaulted": ret.accFaulted,
-      "brakePressed": ret.brakePressed,
-      "ACCMode": scc.get("ACCMode", 0),
-      "VSetDis": scc.get("VSetDis", 0),
-      "aReqRaw": round(scc.get("aReqRaw", 0), 3),
-      "aReqValue": round(scc.get("aReqValue", 0), 3),
-      "DISTANCE_SETTING": scc.get("DISTANCE_SETTING", 0),
-      "ACC_ObjDist": round(scc.get("ACC_ObjDist", 0), 1),
-    })
-
-    tlog("speed_limit", {
-      "SPEED_LIMIT_1": cluster.get("SPEED_LIMIT_1", 0),
-      "SPEED_LIMIT_2": cluster.get("SPEED_LIMIT_2", 0),
-      "SPEED_LIMIT_3": cluster.get("SPEED_LIMIT_3", 0),
-      "SCHOOL_ZONE": cluster.get("SCHOOL_ZONE", 0),
-      "CHIME_1": cluster.get("CHIME_1", 0),
-      "CHIME_2": cluster.get("CHIME_2", 0),
-      "SPEED_CHANGE_BLINKING": cluster.get("SPEED_CHANGE_BLINKING", 0),
-      "calculated": self.calculate_speed_limit(cp, cp_cam),
-      "is_metric": self.is_metric,
-    })
-
-    tlog("buttons", {
-      "cruise_button": self.cruise_buttons[-1],
-      "prev_cruise_button": self.prev_cruise_buttons,
-      "main_button": self.main_buttons[-1],
-      "prev_main_button": self.prev_main_buttons,
-      "lkas_enabled": self.lkas_enabled,
-      "main_enabled": self.main_enabled,
-    })
 
     return ret
 

selfdrive/car/interfaces.py

@@ -484,10 +484,19 @@ class CarInterfaceBase(ABC):
           self.silent_steer_warning = True
           events.add(EventName.steerTempUnavailableSilent)
         else:
+          # CLEARPILOT: log once per instance of this warning
+          if not getattr(self, '_steer_fault_logged', False):
+            import sys
+            print(f"CLP steerTempUnavailable: steerFaultTemporary={cs_out.steerFaultTemporary} "
+                  f"steeringPressed={cs_out.steeringPressed} standstill={cs_out.standstill} "
+                  f"steering_unpressed={self.steering_unpressed} steeringAngleDeg={cs_out.steeringAngleDeg:.1f} "
+                  f"steeringTorque={cs_out.steeringTorque:.1f} vEgo={cs_out.vEgo:.2f}", file=sys.stderr)
+            self._steer_fault_logged = True
           events.add(EventName.steerTempUnavailable)
     else:
       self.no_steer_warning = False
       self.silent_steer_warning = False
+      self._steer_fault_logged = False
     if cs_out.steerFaultPermanent:
       events.add(EventName.steerUnavailable)
 

selfdrive/clearpilot/bench_cmd.py

@@ -7,7 +7,9 @@ Usage:
   python3 -m selfdrive.clearpilot.bench_cmd speed 20
   python3 -m selfdrive.clearpilot.bench_cmd speedlimit 45
   python3 -m selfdrive.clearpilot.bench_cmd cruise 55
+  python3 -m selfdrive.clearpilot.bench_cmd cruiseactive 0|1|2  (0=disabled, 1=active, 2=paused)
   python3 -m selfdrive.clearpilot.bench_cmd engaged 1
+  python3 -m selfdrive.clearpilot.bench_cmd ding              (trigger speed limit ding sound)
   python3 -m selfdrive.clearpilot.bench_cmd debugbutton       (simulate LKAS debug button press)
   python3 -m selfdrive.clearpilot.bench_cmd dump
   python3 -m selfdrive.clearpilot.bench_cmd wait_ready
@@ -89,6 +91,7 @@ def main():
     "speed": "BenchSpeed",
     "speedlimit": "BenchSpeedLimit",
     "cruise": "BenchCruiseSpeed",
+    "cruiseactive": "BenchCruiseActive",
     "engaged": "BenchEngaged",
   }
 
@@ -106,6 +109,10 @@ def main():
   elif cmd == "wait_ready":
     wait_ready()
 
+  elif cmd == "ding":
+    params.put("ClearpilotPlayDing", "1")
+    print("Ding triggered")
+
   elif cmd == "debugbutton":
     # Simulate LKAS debug button — same state machine as controlsd.clearpilot_state_control()
     current = params.get_int("ScreenDisplayMode")

selfdrive/clearpilot/bench_onroad.py

@@ -8,6 +8,7 @@ configurable vehicle state. Control values via params in /dev/shm/params:
   BenchSpeed         - vehicle speed in mph (default: 0)
   BenchSpeedLimit    - speed limit in mph (default: 0, 0=hidden)
   BenchCruiseSpeed   - cruise set speed in mph (default: 0, 0=not set)
+  BenchCruiseActive  - 0=disabled, 1=active, 2=paused/standstill (default: 0)
   BenchGear          - P, D, R, N (default: P)
   BenchEngaged       - 0 or 1, cruise engaged (default: 0)
 
@@ -21,8 +22,8 @@ import time
 import cereal.messaging as messaging
 from cereal import log, car
 from openpilot.common.params import Params
-
+from openpilot.common.conversions import Conversions as CV
-MS_PER_MPH = 0.44704
+from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
 
 
 def main():
@@ -33,9 +34,13 @@ def main():
   params_mem.put("BenchSpeed", "0")
   params_mem.put("BenchSpeedLimit", "0")
   params_mem.put("BenchCruiseSpeed", "0")
+  params_mem.put("BenchCruiseActive", "0")
   params_mem.put("BenchGear", "P")
   params_mem.put("BenchEngaged", "0")
 
+  # ClearPilot speed processing
+  speed_state = SpeedState()
+
   # thermald handles deviceState (reads our fake pandaStates for ignition)
   pm = messaging.PubMaster([
     "pandaStates", "carState", "controlsState",
@@ -61,11 +66,25 @@ def main():
       speed_limit_mph = float((params_mem.get("BenchSpeedLimit", encoding="utf-8") or "0").strip())
       cruise_mph = float((params_mem.get("BenchCruiseSpeed", encoding="utf-8") or "0").strip())
       gear_str = (params_mem.get("BenchGear", encoding="utf-8") or "P").strip().upper()
+      cruise_active_str = (params_mem.get("BenchCruiseActive", encoding="utf-8") or "0").strip()
       engaged = (params_mem.get("BenchEngaged", encoding="utf-8") or "0").strip() == "1"
 
-      speed_ms = speed_mph * MS_PER_MPH
+      speed_ms = speed_mph * CV.MPH_TO_MS
+      speed_limit_ms = speed_limit_mph * CV.MPH_TO_MS
+      cruise_ms = cruise_mph * CV.MPH_TO_MS
       gear = gear_map.get(gear_str, car.CarState.GearShifter.park)
 
+      # Cruise state: 0=disabled, 1=active, 2=paused
+      cruise_active = cruise_active_str == "1"
+      cruise_standstill = cruise_active_str == "2"
+
+      # ClearPilot speed processing (~2 Hz at 10 Hz loop)
+      if frame % 5 == 0:
+        has_speed = speed_mph > 0
+        speed_state.update(speed_ms, has_speed, speed_limit_ms, is_metric=False,
+                           cruise_speed_ms=cruise_ms, cruise_active=cruise_active or cruise_standstill,
+                           cruise_standstill=cruise_standstill)
+
       # pandaStates — 10 Hz (thermald reads ignition from this)
       if frame % 1 == 0:
         dat = messaging.new_message("pandaStates", 1)
@@ -82,7 +101,7 @@ def main():
       cs.standstill = speed_ms < 0.1
       cs.cruiseState.available = True
       cs.cruiseState.enabled = engaged
-      cs.cruiseState.speed = cruise_mph * MS_PER_MPH if cruise_mph > 0 else 0
+      cs.cruiseState.speed = cruise_mph * CV.MPH_TO_MS if cruise_mph > 0 else 0
       pm.send("carState", dat)
 
       # controlsState — 10 Hz

selfdrive/clearpilot/dashcamd.cc

@@ -64,7 +64,8 @@
 
 const std::string VIDEOS_BASE = "/data/media/0/videos";
 const int SEGMENT_SECONDS = 180;  // 3 minutes
-const int CAMERA_FPS = 20;
+const int SOURCE_FPS = 20;
+const int CAMERA_FPS = 10;
 const int FRAMES_PER_SEGMENT = SEGMENT_SECONDS * CAMERA_FPS;
 const int BITRATE = 2500 * 1024;  // 2500 kbps
 const double IDLE_TIMEOUT_SECONDS = 600.0;  // 10 minutes
@@ -129,18 +130,28 @@ int main(int argc, char *argv[]) {
   if (do_exit) return 0;
   LOGW("dashcamd: system time valid");
 
-  LOGW("dashcamd: connecting to camerad road stream");
+  LOGW("dashcamd: started, connecting to camerad road stream");
   VisionIpcClient vipc("camerad", VISION_STREAM_ROAD, false);
   while (!do_exit && !vipc.connect(false)) {
     usleep(100000);
   }
   if (do_exit) return 0;
+  LOGW("dashcamd: vipc connected, waiting for valid frame");
 
-  int width = vipc.buffers[0].width;
+  // Wait for a frame with valid dimensions (camerad may still be initializing)
-  int height = vipc.buffers[0].height;
+  VisionBuf *init_buf = nullptr;
-  int y_stride = vipc.buffers[0].stride;
+  while (!do_exit) {
+    init_buf = vipc.recv();
+    if (init_buf != nullptr && init_buf->width > 0 && init_buf->height > 0) break;
+    usleep(100000);
+  }
+  if (do_exit) return 0;
+
+  int width = init_buf->width;
+  int height = init_buf->height;
+  int y_stride = init_buf->stride;
   int uv_stride = y_stride;
-  LOGW("dashcamd: connected %dx%d, stride=%d", width, height, y_stride);
+  LOGW("dashcamd: first valid frame %dx%d stride=%d", width, height, y_stride);
 
   // Subscribe to carState (gear), deviceState (ignition), gpsLocation (subtitles)
   SubMaster sm({"carState", "deviceState", "gpsLocation"});
@@ -151,6 +162,7 @@ int main(int argc, char *argv[]) {
   OmxEncoder *encoder = nullptr;
   std::string trip_dir;
   int frame_count = 0;
+  int recv_count = 0;
   uint64_t segment_start_ts = 0;
   double idle_timer_start = 0.0;
 
@@ -227,6 +239,10 @@ int main(int argc, char *argv[]) {
     VisionBuf *buf = vipc.recv();
     if (buf == nullptr) continue;
 
+    // CLEARPILOT: skip frames to match target FPS (SOURCE_FPS -> CAMERA_FPS)
+    recv_count++;
+    if (SOURCE_FPS > CAMERA_FPS && (recv_count % (SOURCE_FPS / CAMERA_FPS)) != 0) continue;
+
     sm.update(0);
     double now = nanos_since_boot() / 1e9;
 

selfdrive/clearpilot/speed_logic.py

@@ -0,0 +1,90 @@
+"""
+ClearPilot speed processing module.
+
+Shared logic for converting raw speed and speed limit data into display-ready
+values. Called from controlsd (live mode) and bench_onroad (bench mode).
+
+Reads raw inputs, converts to display units (mph or kph based on car's CAN
+unit setting), detects speed limit changes, and writes results to params_memory
+for the onroad UI to read.
+"""
+import math
+import time
+from openpilot.common.params import Params
+from openpilot.common.conversions import Conversions as CV
+
+
+class SpeedState:
+  def __init__(self):
+    self.params_memory = Params("/dev/shm/params")
+    self.prev_speed_limit = 0
+
+    # Ding state tracking
+    self.last_ding_time = 0.0
+    self.prev_warning = ""
+    self.prev_warning_speed_limit = 0
+
+  def update(self, speed_ms: float, has_speed: bool, speed_limit_ms: float, is_metric: bool,
+             cruise_speed_ms: float = 0.0, cruise_active: bool = False, cruise_standstill: bool = False):
+    """
+    Convert raw m/s values to display-ready strings and write to params_memory.
+    """
+    now = time.monotonic()
+
+    if is_metric:
+      speed_display = speed_ms * CV.MS_TO_KPH
+      speed_limit_display = speed_limit_ms * CV.MS_TO_KPH
+      cruise_display = cruise_speed_ms * CV.MS_TO_KPH
+      unit = "km/h"
+    else:
+      speed_display = speed_ms * CV.MS_TO_MPH
+      speed_limit_display = speed_limit_ms * CV.MS_TO_MPH
+      cruise_display = cruise_speed_ms * CV.MS_TO_MPH
+      unit = "mph"
+
+    speed_int = int(math.floor(speed_display))
+    speed_limit_int = int(round(speed_limit_display))
+    cruise_int = int(round(cruise_display))
+
+    self.prev_speed_limit = speed_limit_int
+
+    # Write display-ready values to params_memory
+    self.params_memory.put("ClearpilotHasSpeed", "1" if has_speed and speed_int > 0 else "0")
+    self.params_memory.put("ClearpilotSpeedDisplay", str(speed_int) if has_speed and speed_int > 0 else "")
+    self.params_memory.put("ClearpilotSpeedLimitDisplay", str(speed_limit_int) if speed_limit_int > 0 else "0")
+    self.params_memory.put("ClearpilotSpeedUnit", unit)
+    self.params_memory.put("ClearpilotIsMetric", "1" if is_metric else "0")
+
+    # Cruise warning logic
+    warning = ""
+    warning_speed = ""
+    cruise_engaged = cruise_active and not cruise_standstill
+
+    if speed_limit_int >= 20 and cruise_engaged and cruise_int > 0:
+      over_threshold = 10 if speed_limit_int >= 50 else 7
+      if cruise_int >= speed_limit_int + over_threshold:
+        warning = "over"
+        warning_speed = str(cruise_int)
+      elif cruise_int <= speed_limit_int - 5:
+        warning = "under"
+        warning_speed = str(cruise_int)
+
+    self.params_memory.put("ClearpilotCruiseWarning", warning)
+    self.params_memory.put("ClearpilotCruiseWarningSpeed", warning_speed)
+
+    # Ding logic: play when warning sign appears or speed limit changes while visible
+    should_ding = False
+    if warning:
+      if not self.prev_warning:
+        # Warning sign just appeared
+        should_ding = True
+      elif speed_limit_int != self.prev_warning_speed_limit:
+        # Speed limit changed while warning sign is visible
+        should_ding = True
+
+    if should_ding and now - self.last_ding_time >= 30:
+      self.params_memory.put("ClearpilotPlayDing", "1")
+      self.last_ding_time = now
+
+    self.prev_warning = warning
+    self.prev_warning_speed_limit = speed_limit_int if warning else 0

selfdrive/clearpilot/telemetry.py

@@ -6,20 +6,39 @@ Usage from any process:
   tlog("canbus", {"speed": 45.2, "speed_limit": 60})
 
 Sends JSON packets over ZMQ PUSH to telemetryd, which diffs and writes CSV.
+Only sends when TelemetryEnabled memory param is set — zero cost when disabled.
 """
 import json
+import os
 import time
 import zmq
 
 TELEMETRY_SOCK = "ipc:///tmp/clearpilot_telemetry"
+_PARAM_PATH = "/dev/shm/params/d/TelemetryEnabled"
 
 _ctx = None
 _sock = None
+_last_check = 0
+_enabled = False
 
 
 def tlog(group: str, data: dict):
   """Log a telemetry packet. Only changed values will be written to CSV by telemetryd."""
-  global _ctx, _sock
+  global _ctx, _sock, _last_check, _enabled
+
+  # Check param at most once per second to avoid filesystem overhead
+  now = time.monotonic()
+  if now - _last_check > 1.0:
+    _last_check = now
+    try:
+      with open(_PARAM_PATH, 'r') as f:
+        _enabled = f.read().strip() == "1"
+    except (FileNotFoundError, IOError):
+      _enabled = False
+
+  if not _enabled:
+    return
+
   if _sock is None:
     _ctx = zmq.Context.instance()
     _sock = _ctx.socket(zmq.PUSH)

selfdrive/clearpilot/telemetryd.py

@@ -17,6 +17,7 @@ import shutil
 import time
 import zmq
 
+import cereal.messaging as messaging
 from openpilot.common.params import Params
 from openpilot.selfdrive.clearpilot.telemetry import TELEMETRY_SOCK
 from openpilot.selfdrive.manager.process import _log_dir, session_log
@@ -26,12 +27,16 @@ DISK_CHECK_INTERVAL = 10  # seconds
 
 
 def main():
-  params = Params()
+  params = Params("/dev/shm/params")
   ctx = zmq.Context.instance()
   sock = ctx.socket(zmq.PULL)
   sock.setsockopt(zmq.RCVHWM, 1000)
   sock.bind(TELEMETRY_SOCK)
 
+  # GPS subscriber for location telemetry
+  sm = messaging.SubMaster(['gpsLocation'])
+  last_gps_log = 0
+
   csv_path = os.path.join(_log_dir, "telemetry.csv")
   state: dict[str, dict] = {}  # group -> {key: last_value}
   was_enabled = False
@@ -71,6 +76,34 @@ def main():
 
     was_enabled = enabled
 
+    # GPS telemetry at most 1Hz — fed through the same diff logic
+    if enabled and writer is not None:
+      sm.update(0)
+      now = time.monotonic()
+      if sm.updated['gpsLocation'] and (now - last_gps_log) >= 1.0:
+        gps = sm['gpsLocation']
+        gps_data = {
+          "latitude": f"{gps.latitude:.7f}",
+          "longitude": f"{gps.longitude:.7f}",
+          "speed": f"{gps.speed:.2f}",
+          "altitude": f"{gps.altitude:.1f}",
+          "bearing": f"{gps.bearingDeg:.1f}",
+          "accuracy": f"{gps.accuracy:.1f}",
+        }
+        ts = time.time()
+        if "gps" not in state:
+          state["gps"] = {}
+        prev_gps = state["gps"]
+        gps_changed = False
+        for key, value in gps_data.items():
+          if key not in prev_gps or prev_gps[key] != value:
+            writer.writerow([f"{ts:.6f}", "gps", key, value])
+            prev_gps[key] = value
+            gps_changed = True
+        if gps_changed:
+          f.flush()
+        last_gps_log = now
+
     # Always drain the socket (even when disabled) to avoid backpressure
     try:
       raw = sock.recv_string(zmq.NOBLOCK)

selfdrive/controls/controlsd.py

@@ -38,6 +38,7 @@ from openpilot.selfdrive.frogpilot.controls.lib.frogpilot_functions import CRUIS
 
 from openpilot.selfdrive.frogpilot.controls.lib.model_manager import RADARLESS_MODELS
 from openpilot.selfdrive.clearpilot.telemetry import tlog
+from openpilot.selfdrive.clearpilot.speed_logic import SpeedState
 from openpilot.selfdrive.frogpilot.controls.lib.speed_limit_controller import SpeedLimitController
 
 SOFT_DISABLE_TIME = 3  # seconds
@@ -48,7 +49,7 @@ CAMERA_OFFSET = 0.04
 REPLAY = "REPLAY" in os.environ
 SIMULATION = "SIMULATION" in os.environ
 TESTING_CLOSET = "TESTING_CLOSET" in os.environ
-IGNORE_PROCESSES = {"loggerd", "encoderd", "statsd"}
+IGNORE_PROCESSES = {"loggerd", "encoderd", "statsd", "telemetryd", "dashcamd"}
 
 ThermalStatus = log.DeviceState.ThermalStatus
 State = log.ControlsState.OpenpilotState
@@ -80,6 +81,10 @@ class Controls:
     self.params_memory.put_bool("CPTLkasButtonAction", False)
     self.params_memory.put_int("ScreenDisplayMode", 0)
 
+    # ClearPilot speed processing
+    self.speed_state = SpeedState()
+    self.speed_state_frame = 0
+
     self.radarless_model = self.params.get("Model", encoding='utf-8') in RADARLESS_MODELS
 
     with car.CarParams.from_bytes(self.params.get("CarParams", block=True)) as msg:
@@ -108,8 +113,9 @@ class Controls:
     self.sm = messaging.SubMaster(['deviceState', 'pandaStates', 'peripheralState', 'modelV2', 'liveCalibration',
                                    'carOutput', 'driverMonitoringState', 'longitudinalPlan', 'liveLocationKalman',
                                    'managerState', 'liveParameters', 'radarState', 'liveTorqueParameters',
-                                   'testJoystick', 'frogpilotPlan'] + self.camera_packets + self.sensor_packets,
+                                   'testJoystick', 'frogpilotPlan', 'gpsLocation'] + self.camera_packets + self.sensor_packets,
-                                  ignore_alive=ignore, ignore_avg_freq=ignore+['radarState', 'testJoystick'], ignore_valid=['testJoystick', ],
+                                  ignore_alive=ignore+['gpsLocation'], ignore_avg_freq=ignore+['radarState', 'testJoystick', 'gpsLocation'],
+                                  ignore_valid=['testJoystick', 'gpsLocation'],
                                   frequency=int(1/DT_CTRL))
 
     self.joystick_mode = self.params.get_bool("JoystickDebugMode")
@@ -198,6 +204,8 @@ class Controls:
     self.always_on_lateral_main = self.always_on_lateral and self.params.get_bool("AlwaysOnLateralMain")
 
     self.drive_added = False
+    self.driving_gear = False
+    self.was_driving_gear = False
     self.fcw_random_event_triggered = False
     self.holiday_theme_alerted = False
     self.onroad_distance_pressed = False
@@ -442,6 +450,13 @@ class Controls:
     # All events here should at least have NO_ENTRY and SOFT_DISABLE.
     num_events = len(self.events)
 
+    # CLEARPILOT: compute model standby suppression early — used by multiple checks below
+    try:
+      standby_ts = float(self.params_memory.get("ModelStandbyTs") or "0")
+    except (ValueError, TypeError):
+      standby_ts = 0
+    model_suppress = (time.monotonic() - standby_ts) < 2.0
+
     not_running = {p.name for p in self.sm['managerState'].processes if not p.running and p.shouldBeRunning}
     if self.sm.recv_frame['managerState'] and (not_running - IGNORE_PROCESSES):
       self.events.add(EventName.processNotRunning)
@@ -455,9 +470,11 @@ class Controls:
         elif not self.sm.all_freq_ok(self.camera_packets):
           self.events.add(EventName.cameraFrameRate)
     if not REPLAY and self.rk.lagging:
+      import sys
+      print(f"CLP controlsdLagging: remaining={self.rk.remaining:.4f} standstill={CS.standstill} vEgo={CS.vEgo:.2f}", file=sys.stderr)
       self.events.add(EventName.controlsdLagging)
     if not self.radarless_model:
-      if len(self.sm['radarState'].radarErrors) or (not self.rk.lagging and not self.sm.all_checks(['radarState'])):
+      if not model_suppress and (len(self.sm['radarState'].radarErrors) or (not self.rk.lagging and not self.sm.all_checks(['radarState']))):
         self.events.add(EventName.radarFault)
     if not self.sm.valid['pandaStates']:
       self.events.add(EventName.usbError)
@@ -469,7 +486,7 @@ class Controls:
     # generic catch-all. ideally, a more specific event should be added above instead
     has_disable_events = self.events.contains(ET.NO_ENTRY) and (self.events.contains(ET.SOFT_DISABLE) or self.events.contains(ET.IMMEDIATE_DISABLE))
     no_system_errors = (not has_disable_events) or (len(self.events) == num_events)
-    if (not self.sm.all_checks() or self.card.can_rcv_timeout) and no_system_errors:
+    if (not self.sm.all_checks() or self.card.can_rcv_timeout) and no_system_errors and not model_suppress:
       if not self.sm.all_alive():
         self.events.add(EventName.commIssue)
       elif not self.sm.all_freq_ok():
@@ -490,13 +507,13 @@ class Controls:
       self.logged_comm_issue = None
 
     if not (self.CP.notCar and self.joystick_mode):
-      if not self.sm['liveLocationKalman'].posenetOK:
+      if not self.sm['liveLocationKalman'].posenetOK and not model_suppress:
         self.events.add(EventName.posenetInvalid)
       if not self.sm['liveLocationKalman'].deviceStable:
         self.events.add(EventName.deviceFalling)
-      if not self.sm['liveLocationKalman'].inputsOK:
+      if not self.sm['liveLocationKalman'].inputsOK and not model_suppress:
         self.events.add(EventName.locationdTemporaryError)
-      if not self.sm['liveParameters'].valid and not TESTING_CLOSET and (not SIMULATION or REPLAY):
+      if not self.sm['liveParameters'].valid and not TESTING_CLOSET and (not SIMULATION or REPLAY) and not model_suppress:
         self.events.add(EventName.paramsdTemporaryError)
 
     # conservative HW alert. if the data or frequency are off, locationd will throw an error
@@ -542,7 +559,7 @@ class Controls:
         self.distance_traveled = 0
       self.distance_traveled += CS.vEgo * DT_CTRL
 
-      if self.sm['modelV2'].frameDropPerc > 20:
+      if self.sm['modelV2'].frameDropPerc > 20 and not model_suppress:
         self.events.add(EventName.modeldLagging)
 
 
@@ -630,15 +647,13 @@ class Controls:
     self.enabled = self.state in ENABLED_STATES
     self.active = self.state in ACTIVE_STATES
 
-    # CLEARPILOT: log engagement state for debugging cruise desync issues
+    # CLEARPILOT: engagement telemetry disabled — was running at 100Hz, causing CPU load
-    tlog("engage", {
+    # tlog("engage", {
-      "state": self.state.name if hasattr(self.state, 'name') else str(self.state),
+    #   "state": self.state.name if hasattr(self.state, 'name') else str(self.state),
-      "enabled": self.enabled,
+    #   "enabled": self.enabled, "active": self.active,
-      "active": self.active,
+    #   "cruise_enabled": CS.cruiseState.enabled, "cruise_available": CS.cruiseState.available,
-      "cruise_enabled": CS.cruiseState.enabled,
+    #   "brakePressed": CS.brakePressed,
-      "cruise_available": CS.cruiseState.available,
+    # })
-      "brakePressed": CS.brakePressed,
-    })
     if self.active:
       self.current_alert_types.append(ET.WARNING)
 
@@ -1250,6 +1265,12 @@ class Controls:
       self.events.add(EventName.clpDebug)
 
   def clearpilot_state_control(self, CC, CS):
+    # CLEARPILOT: auto-reset display when shifting into drive from screen-off
+    if self.driving_gear and not self.was_driving_gear:
+      if self.params_memory.get_int("ScreenDisplayMode") == 3:
+        self.params_memory.put_int("ScreenDisplayMode", 0)
+    self.was_driving_gear = self.driving_gear
+
     if any(be.pressed and be.type == FrogPilotButtonType.lkas for be in CS.buttonEvents):
       current = self.params_memory.get_int("ScreenDisplayMode")
 
@@ -1262,6 +1283,21 @@ class Controls:
         new_mode = 0 if current == 3 else 3
 
       self.params_memory.put_int("ScreenDisplayMode", new_mode)
+
+    # ClearPilot speed processing (~2 Hz at 100 Hz loop)
+    self.speed_state_frame += 1
+    if self.speed_state_frame % 50 == 0:
+      gps = self.sm['gpsLocation']
+      has_gps = self.sm.valid['gpsLocation'] and gps.hasFix
+      speed_ms = gps.speed if has_gps else 0.0
+      speed_limit_ms = self.params_memory.get_float("CarSpeedLimit")
+      is_metric = (self.params_memory.get("CarIsMetric", encoding="utf-8") or "0") == "1"
+      cruise_speed_ms = CS.cruiseState.speed
+      cruise_active = CS.cruiseState.enabled
+      cruise_standstill = CS.cruiseState.standstill
+      self.speed_state.update(speed_ms, has_gps, speed_limit_ms, is_metric,
+                              cruise_speed_ms, cruise_active, cruise_standstill)
+
     return CC
 
 def main():

selfdrive/manager/manager.py

@@ -83,9 +83,21 @@ def manager_init(frogpilot_functions) -> None:
   params_storage = Params("/persist/params")
   params.clear_all(ParamKeyType.CLEAR_ON_MANAGER_START)
 
-  # CLEARPILOT: always start with telemetry disabled, VPN enabled
+  # CLEARPILOT: always start with telemetry disabled, VPN enabled (memory params)
-  params.put("TelemetryEnabled", "0")
+  params_memory = Params("/dev/shm/params")
-  params.put("VpnEnabled", "1")
+  params_memory.put("TelemetryEnabled", "0")
+  params_memory.put("VpnEnabled", "1")
+  params_memory.put("ModelStandby", "0")
+  params_memory.put("ModelStandbyTs", "0")
+  params_memory.put("CarIsMetric", "0")
+  params_memory.put("ClearpilotSpeedDisplay", "")
+  params_memory.put("ClearpilotSpeedLimitDisplay", "0")
+  params_memory.put("ClearpilotHasSpeed", "0")
+  params_memory.put("ClearpilotIsMetric", "0")
+  params_memory.put("ClearpilotSpeedUnit", "mph")
+  params_memory.put("ClearpilotCruiseWarning", "")
+  params_memory.put("ClearpilotCruiseWarningSpeed", "")
+  params_memory.put("ClearpilotPlayDing", "0")
   params.clear_all(ParamKeyType.CLEAR_ON_ONROAD_TRANSITION)
   params.clear_all(ParamKeyType.CLEAR_ON_OFFROAD_TRANSITION)
   if is_release_branch():

selfdrive/manager/process_config.py

@@ -54,7 +54,7 @@ def allow_uploads(started, params, CP: car.CarParams) -> bool:
 
 # ClearPilot functions
 def dashcam_should_run(started, params, CP: car.CarParams) -> bool:
-  return started or params.get_bool("DashcamDebug")
+  return True  # CLEARPILOT: dashcamd manages its own trip lifecycle
 
 procs = [
   DaemonProcess("manage_athenad", "selfdrive.athena.manage_athenad", "AthenadPid"),
@@ -85,7 +85,7 @@ procs = [
   PythonProcess("deleter", "system.loggerd.deleter", always_run),
   PythonProcess("dmonitoringd", "selfdrive.monitoring.dmonitoringd", driverview, enabled=(not PC or WEBCAM)),
   # PythonProcess("qcomgpsd", "system.qcomgpsd.qcomgpsd", qcomgps, enabled=TICI),
-  # PythonProcess("gpsd", "system.clearpilot.gpsd", qcomgps, enabled=TICI),  # DISABLED: testing perf
+  PythonProcess("gpsd", "system.clearpilot.gpsd", qcomgps, enabled=TICI),
   # PythonProcess("ugpsd", "system.ugpsd", only_onroad, enabled=TICI),
   #PythonProcess("navd", "selfdrive.navd.navd", only_onroad),
   PythonProcess("pandad", "selfdrive.boardd.pandad", always_run),
@@ -110,7 +110,7 @@ procs = [
   PythonProcess("frogpilot_process", "selfdrive.frogpilot.frogpilot_process", always_run),
 
   # ClearPilot processes
-  # NativeProcess("dashcamd", "selfdrive/clearpilot", ["./dashcamd"], dashcam_should_run),  # DISABLED: testing perf
+  NativeProcess("dashcamd", "selfdrive/clearpilot", ["./dashcamd"], dashcam_should_run),
   PythonProcess("telemetryd", "selfdrive.clearpilot.telemetryd", always_run),
   PythonProcess("bench_onroad", "selfdrive.clearpilot.bench_onroad", always_run, enabled=BENCH_MODE),
 ]

selfdrive/modeld/modeld.py

@@ -134,11 +134,15 @@ def main(demo=False):
   setproctitle(PROCESS_NAME)
   config_realtime_process(7, 54)
 
+  import time as _time
   cloudlog.warning("setting up CL context")
+  _t0 = _time.monotonic()
   cl_context = CLContext()
-  cloudlog.warning("CL context ready; loading model")
+  _t1 = _time.monotonic()
+  cloudlog.warning("CL context ready in %.3fs; loading model", _t1 - _t0)
   model = ModelState(cl_context)
-  cloudlog.warning("models loaded, modeld starting")
+  _t2 = _time.monotonic()
+  cloudlog.warning("model loaded in %.3fs (total init %.3fs), modeld starting", _t2 - _t1, _t2 - _t0)
 
   # visionipc clients
   while True:
@@ -179,6 +183,9 @@ def main(demo=False):
   model_transform_main = np.zeros((3, 3), dtype=np.float32)
   model_transform_extra = np.zeros((3, 3), dtype=np.float32)
   live_calib_seen = False
+  model_standby = False
+  last_standby_ts_write = 0
+  params_memory = Params("/dev/shm/params")
   nav_features = np.zeros(ModelConstants.NAV_FEATURE_LEN, dtype=np.float32)
   nav_instructions = np.zeros(ModelConstants.NAV_INSTRUCTION_LEN, dtype=np.float32)
   buf_main, buf_extra = None, None
@@ -233,6 +240,50 @@ def main(demo=False):
       meta_extra = meta_main
 
     sm.update(0)
+
+    # CLEARPILOT: power saving — three modes based on driving state
+    #   Full 20fps: lat active or lane changing
+    #   Reduced 4fps: not lat active, not standstill (driving without cruise)
+    #   Standby 0fps: standstill
+    lat_active = sm['carControl'].latActive
+    lane_changing = params_memory.get_bool("no_lat_lane_change")
+    standstill = sm['carState'].standstill
+    calibrating = sm['liveCalibration'].calStatus != log.LiveCalibrationData.Status.calibrated
+    full_rate = lat_active or lane_changing or calibrating
+
+    # Standby transitions (standstill only)
+    should_standby = standstill and not full_rate
+    if should_standby and not model_standby:
+      params_memory.put_bool("ModelStandby", True)
+      model_standby = True
+      cloudlog.warning("modeld: standby ON (standstill)")
+    elif not should_standby and model_standby:
+      params_memory.put_bool("ModelStandby", False)
+      model_standby = False
+      run_count = 0
+      frame_dropped_filter.x = 0.
+      cloudlog.warning("modeld: standby OFF")
+    if model_standby:
+      now = _time.monotonic()
+      if now - last_standby_ts_write > 1.0:
+        params_memory.put("ModelStandbyTs", str(now))
+        last_standby_ts_write = now
+      last_vipc_frame_id = meta_main.frame_id
+      continue
+
+    # Reduced framerate: 4fps when not lat active and not standstill
+    # Skip 4 out of every 5 frames (20fps -> 4fps)
+    # Write standby timestamp so controlsd suppresses transient errors
+    if not full_rate:
+      now = _time.monotonic()
+      if now - last_standby_ts_write > 1.0:
+        params_memory.put("ModelStandbyTs", str(now))
+        last_standby_ts_write = now
+      if run_count % 5 != 0:
+        last_vipc_frame_id = meta_main.frame_id
+        run_count += 1
+        continue
+
     desire = DH.desire
     is_rhd = sm["driverMonitoringState"].isRHD
     frame_id = sm["roadCameraState"].frameId

selfdrive/thermald/fan_controller.py

@@ -1,4 +1,5 @@
 #!/usr/bin/env python3
+import os
 from abc import ABC, abstractmethod
 
 from openpilot.common.realtime import DT_TRML
@@ -6,9 +7,11 @@ from openpilot.common.numpy_fast import interp
 from openpilot.common.swaglog import cloudlog
 from openpilot.selfdrive.controls.lib.pid import PIDController
 
+BENCH_MODE = os.environ.get("BENCH_MODE") == "1"
+
 class BaseFanController(ABC):
   @abstractmethod
-  def update(self, cur_temp: float, ignition: bool) -> int:
+  def update(self, cur_temp: float, ignition: bool, standstill: bool = False) -> int:
     pass
 
 
@@ -20,9 +23,25 @@ class TiciFanController(BaseFanController):
     self.last_ignition = False
     self.controller = PIDController(k_p=0, k_i=4e-3, k_f=1, rate=(1 / DT_TRML))
 
-  def update(self, cur_temp: float, ignition: bool) -> int:
+  def update(self, cur_temp: float, ignition: bool, standstill: bool = False) -> int:
-    self.controller.neg_limit = -(100 if ignition else 30)
+    # CLEARPILOT: bench mode always uses normal onroad fan range (30-100%)
-    self.controller.pos_limit = -(30 if ignition else 0)
+    if BENCH_MODE and ignition:
+      self.controller.neg_limit = -100
+      self.controller.pos_limit = -30
+    # CLEARPILOT: at standstill below 74°C, clamp to 0-30% (quiet)
+    # at standstill above 74°C, allow full 0-100% range
+    elif ignition and standstill and cur_temp < 74:
+      self.controller.neg_limit = -30
+      self.controller.pos_limit = 0
+    elif ignition and standstill:
+      self.controller.neg_limit = -100
+      self.controller.pos_limit = 0
+    elif ignition:
+      self.controller.neg_limit = -100
+      self.controller.pos_limit = -15
+    else:
+      self.controller.neg_limit = -30
+      self.controller.pos_limit = 0
 
     if ignition != self.last_ignition:
       self.controller.reset()

selfdrive/thermald/thermald.py

@@ -164,7 +164,7 @@ def hw_state_thread(end_event, hw_queue):
 
 def thermald_thread(end_event, hw_queue) -> None:
   pm = messaging.PubMaster(['deviceState', 'frogpilotDeviceState'])
-  sm = messaging.SubMaster(["peripheralState", "gpsLocationExternal", "controlsState", "pandaStates"], poll="pandaStates")
+  sm = messaging.SubMaster(["peripheralState", "gpsLocationExternal", "controlsState", "pandaStates", "carState"], poll="pandaStates")
 
   count = 0
 
@@ -290,7 +290,8 @@ def thermald_thread(end_event, hw_queue) -> None:
     msg.deviceState.maxTempC = all_comp_temp
 
     if fan_controller is not None:
-      msg.deviceState.fanSpeedPercentDesired = fan_controller.update(all_comp_temp, onroad_conditions["ignition"])
+      standstill = sm['carState'].standstill if sm.seen['carState'] else False
+      msg.deviceState.fanSpeedPercentDesired = fan_controller.update(all_comp_temp, onroad_conditions["ignition"], standstill)
 
     is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (time.monotonic() - off_ts > 60 * 5))
     if is_offroad_for_5_min and offroad_comp_temp > OFFROAD_DANGER_TEMP:

selfdrive/ui/SConscript

@@ -77,20 +77,11 @@ qt_env.Program("_text", ["qt/text.cc"], LIBS=qt_libs)
 qt_env.Program("_spinner", ["qt/spinner.cc"], LIBS=qt_libs)
 
 
-# Clearpilot
+# Clearpilot tools
-# Add qtwebengine to build paths
-qt_env['CXXFLAGS'] += ["-I/usr/include/aarch64-linux-gnu/qt5/QtWebEngine"]
-qt_env['CXXFLAGS'] += ["-I/usr/include/aarch64-linux-gnu/qt5/QtWebEngineCore"]
-qt_env['CXXFLAGS'] += ["-I/usr/include/aarch64-linux-gnu/qt5/QtWebEngineWidgets"]
-qt_env['CXXFLAGS'] += ["-I/usr/include/aarch64-linux-gnu/qt5/QtWebChannel"]
-qt_webengine_libs = qt_libs + ['Qt5WebEngineWidgets']
-
-# Create clearpilot tools
 qt_env.Program("/data/openpilot/system/clearpilot/tools/qt_shell", ["/data/openpilot/system/clearpilot/tools/qt_shell.cc"], LIBS=qt_libs)
-# qt_env.Program("/data/openpilot/system/clearpilot/tools/qt_webview", ["/data/openpilot/system/clearpilot/tools/qt_webview.cc"], LIBS=qt_webengine_libs)
 
 # build main UI
-qt_env.Program("ui", qt_src + [asset_obj], LIBS=qt_webengine_libs)
+qt_env.Program("ui", qt_src + [asset_obj], LIBS=qt_libs)
 if GetOption('extras'):
   qt_src.remove("main.cc")  # replaced by test_runner
   qt_env.Program('tests/test_translations', [asset_obj, 'tests/test_runner.cc', 'tests/test_translations.cc'] + qt_src, LIBS=qt_libs)

selfdrive/ui/qt/home.cc

@@ -85,19 +85,25 @@ void HomeWindow::updateState(const UIState &s) {
     showDriverView(s.scene.driver_camera_timer >= 10, true);
 
     // CLEARPILOT: show splash screen when onroad but in park
+    // In nightrider mode (states 1,4), stay on onroad view in park — only offroad transition shows splash
     bool parked = s.scene.parked;
+    int screenMode = paramsMemory.getInt("ScreenDisplayMode");
+    bool nightrider = (screenMode == 1 || screenMode == 4);
+
     if (parked && !was_parked_onroad) {
+      if (!nightrider) {
         LOGW("CLP UI: park transition -> showing splash");
         slayout->setCurrentWidget(ready);
+      }
     } else if (!parked && was_parked_onroad) {
       LOGW("CLP UI: drive transition -> showing onroad");
       slayout->setCurrentWidget(onroad);
+      ready->has_driven = true;
     }
     was_parked_onroad = parked;
 
-    // CLEARPILOT: honor display on/off while showing splash in park
+    // CLEARPILOT: honor display on/off while showing splash in park (normal mode only)
     if (parked && ready->isVisible()) {
-      int screenMode = paramsMemory.getInt("ScreenDisplayMode");
       if (screenMode == 3) {
         Hardware::set_display_power(false);
       } else {
@@ -350,15 +356,21 @@ ClearPilotPanel::ClearPilotPanel(QWidget* parent) : QFrame(parent) {
   ListWidget *debug_panel = new ListWidget(this);
   debug_panel->setContentsMargins(50, 25, 50, 25);
 
-  auto *telemetry_toggle = new ParamControl("TelemetryEnabled", "Telemetry Logging",
+  auto *telemetry_toggle = new ToggleControl("Telemetry Logging",
     "Record telemetry data to CSV in the session log directory. "
-    "Captures only changed values for efficiency.", "", this);
+    "Captures only changed values for efficiency.", "",
+    Params("/dev/shm/params").getBool("TelemetryEnabled"), this);
+  QObject::connect(telemetry_toggle, &ToggleControl::toggleFlipped, [](bool on) {
+    Params("/dev/shm/params").putBool("TelemetryEnabled", on);
+  });
   debug_panel->addItem(telemetry_toggle);
 
-  auto *vpn_toggle = new ParamControl("VpnEnabled", "VPN",
+  auto *vpn_toggle = new ToggleControl("VPN",
     "Connect to vpn.hanson.xyz for remote SSH access. "
-    "Disabling kills the active tunnel and stops reconnection attempts.", "", this);
+    "Disabling kills the active tunnel and stops reconnection attempts.", "",
+    Params("/dev/shm/params").getBool("VpnEnabled"), this);
   QObject::connect(vpn_toggle, &ToggleControl::toggleFlipped, [](bool on) {
+    Params("/dev/shm/params").putBool("VpnEnabled", on);
     if (on) {
       std::system("sudo bash -c 'nohup /data/openpilot/system/clearpilot/vpn-monitor.sh >> /tmp/vpn-monitor.log 2>&1 &'");
     } else {

selfdrive/ui/qt/onroad.cc

@@ -177,7 +177,14 @@ void OnroadWindow::offroadTransition(bool offroad) {
 
 void OnroadWindow::paintEvent(QPaintEvent *event) {
   QPainter p(this);
+  // CLEARPILOT: hide engagement border in nightrider mode
+  int dm = paramsMemory.getInt("ScreenDisplayMode");
+  bool nightrider = (dm == 1 || dm == 4);
+  if (nightrider) {
+    p.fillRect(rect(), Qt::black);
+  } else {
     p.fillRect(rect(), QColor(bg.red(), bg.green(), bg.blue(), 255));
+  }
 
   QString logicsDisplayString = QString();
   if (scene.show_jerk) {
@@ -348,14 +355,15 @@ void AnnotatedCameraWidget::updateState(const UIState &s) {
     setSpeed *= KM_TO_MILE;
   }
 
-  // CLEARPILOT: use GPS speed if available, hide speed display if no GPS fix
+  // CLEARPILOT: read speed and speed limit from params (written by speed_logic.py ~2Hz)
-  has_gps_speed = sm.valid("gpsLocation") && sm["gpsLocation"].getGpsLocation().getHasFix();
+  clpParamFrame++;
-  if (has_gps_speed) {
+  if (clpParamFrame % 10 == 0) {  // ~2Hz at 20Hz UI update rate
-    float gps_speed_ms = sm["gpsLocation"].getGpsLocation().getSpeed();
+    clpHasSpeed = paramsMemory.get("ClearpilotHasSpeed") == "1";
-    speed = std::max<float>(0.0, gps_speed_ms);
+    clpSpeedDisplay = QString::fromStdString(paramsMemory.get("ClearpilotSpeedDisplay"));
-    speed *= s.scene.is_metric ? MS_TO_KPH : MS_TO_MPH;
+    clpSpeedLimitDisplay = QString::fromStdString(paramsMemory.get("ClearpilotSpeedLimitDisplay"));
-  } else {
+    clpSpeedUnit = QString::fromStdString(paramsMemory.get("ClearpilotSpeedUnit"));
-    speed = 0.0;
+    clpCruiseWarning = QString::fromStdString(paramsMemory.get("ClearpilotCruiseWarning"));
+    clpCruiseWarningSpeed = QString::fromStdString(paramsMemory.get("ClearpilotCruiseWarningSpeed"));
   }
 
   // auto speed_limit_sign = nav_instruction.getSpeedLimitSign();
@@ -404,7 +412,7 @@ void AnnotatedCameraWidget::drawHud(QPainter &p) {
   }
 
   // CLEARPILOT: blinking blue circle when telemetry is recording
-  if (Params().getBool("TelemetryEnabled")) {
+  if (paramsMemory.getBool("TelemetryEnabled")) {
     // Blink: visible for 500ms, hidden for 500ms
     int phase = (QDateTime::currentMSecsSinceEpoch() / 500) % 2;
     if (phase == 0) {
@@ -424,7 +432,7 @@ void AnnotatedCameraWidget::drawHud(QPainter &p) {
 
   // QString speedLimitStr = (speedLimit > 1) ? QString::number(std::nearbyint(speedLimit)) : "–";
   // QString speedLimitOffsetStr = slcSpeedLimitOffset == 0 ? "–" : QString::number(slcSpeedLimitOffset, 'f', 0).prepend(slcSpeedLimitOffset > 0 ? "+" : "");
-  QString speedStr = QString::number(std::nearbyint(speed));
+  // QString speedStr = QString::number(std::nearbyint(speed));
   QString setSpeedStr = is_cruise_set ? QString::number(std::nearbyint(setSpeed - cruiseAdjustment)) : "–";
 
   p.restore();
@@ -448,14 +456,18 @@ void AnnotatedCameraWidget::drawHud(QPainter &p) {
   // Todo: lead speed
   // Todo: Experimental speed
 
-  // CLEARPILOT: show GPS speed, hide when no fix
+  // CLEARPILOT: show speed from speed_logic params, hide when no speed or speed=0
-  if (has_gps_speed && !scene.hide_speed) {
+  if (clpHasSpeed && !clpSpeedDisplay.isEmpty() && !scene.hide_speed) {
     p.setFont(InterFont(140, QFont::Bold));
-    drawText(p, rect().center().x(), 210, speedStr);
+    drawText(p, rect().center().x(), 210, clpSpeedDisplay);
     p.setFont(InterFont(50));
-    drawText(p, rect().center().x(), 290, speedUnit, 200);
+    drawText(p, rect().center().x(), 290, clpSpeedUnit, 200);
   }
 
+  // CLEARPILOT: speed limit sign in lower-left, cruise warning above it
+  drawSpeedLimitSign(p);
+  drawCruiseWarningSign(p);
+
   // Draw FrogPilot widgets
   paintFrogPilotWidgets(p);
 }
@@ -549,6 +561,164 @@ void AnnotatedCameraWidget::drawSpeedWidget(QPainter &p, int x, int y, const QSt
 }
 
 
+void AnnotatedCameraWidget::drawSpeedLimitSign(QPainter &p) {
+  // Hide when no speed limit or speed limit is 0
+  if (clpSpeedLimitDisplay.isEmpty() || clpSpeedLimitDisplay == "0") return;
+
+  p.save();
+
+  const int signW = 189;
+  const int signH = 239;
+  const int margin = 20;
+  const int borderW = 6;
+  const int innerBorderW = 4;
+  const int innerMargin = 10;
+  const int cornerR = 15;
+
+  // Position: 20px from lower-left corner
+  QRect signRect(margin, height() - signH - margin, signW, signH);
+
+  if (nightriderMode) {
+    // Nightrider: black background, light gray-blue border and text
+    QColor borderColor(160, 180, 210);
+    QColor textColor(160, 180, 210);
+
+    // Outer border
+    p.setPen(QPen(borderColor, borderW));
+    p.setBrush(QColor(0, 0, 0, 220));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    // Inner border
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(borderColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "SPEED" text
+    p.setPen(textColor);
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SPEED");
+
+    // "LIMIT" text
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 48, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "LIMIT");
+
+    // Speed limit number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpSpeedLimitDisplay);
+  } else {
+    // Normal: white background, black border and text
+    QColor borderColor(0, 0, 0);
+    QColor textColor(0, 0, 0);
+
+    // Outer border
+    p.setPen(QPen(borderColor, borderW));
+    p.setBrush(QColor(255, 255, 255, 240));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    // Inner border
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(borderColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "SPEED" text
+    p.setPen(textColor);
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SPEED");
+
+    // "LIMIT" text
+    p.setFont(InterFont(30, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 48, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "LIMIT");
+
+    // Speed limit number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpSpeedLimitDisplay);
+  }
+
+  p.restore();
+}
+
+void AnnotatedCameraWidget::drawCruiseWarningSign(QPainter &p) {
+  // Only show when there's an active warning and the speed limit sign is visible
+  if (clpCruiseWarning.isEmpty() || clpCruiseWarningSpeed.isEmpty()) return;
+  if (clpSpeedLimitDisplay.isEmpty() || clpSpeedLimitDisplay == "0") return;
+
+  bool isOver = (clpCruiseWarning == "over");
+  if (!isOver && clpCruiseWarning != "under") return;
+
+  p.save();
+
+  // Same dimensions as speed limit sign
+  const int signW = 189;
+  const int signH = 239;
+  const int margin = 20;
+  const int borderW = 6;
+  const int innerBorderW = 4;
+  const int innerMargin = 10;
+  const int cornerR = 15;
+  const int gap = 20;
+
+  // Position: directly above the speed limit sign
+  int speedLimitY = height() - signH - margin;
+  QRect signRect(margin, speedLimitY - signH - gap, signW, signH);
+
+  if (nightriderMode) {
+    // Nightrider: black background with colored border/text
+    QColor accentColor = isOver ? QColor(220, 50, 50) : QColor(50, 180, 80);
+
+    p.setPen(QPen(accentColor, borderW));
+    p.setBrush(QColor(0, 0, 0, 220));
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(accentColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "CRUISE" text
+    p.setPen(accentColor);
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "CRUISE");
+
+    // "SET" text
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 45, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SET");
+
+    // Cruise speed number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpCruiseWarningSpeed);
+  } else {
+    // Normal: colored background with white border/text
+    QColor bgColor = isOver ? QColor(200, 30, 30, 240) : QColor(40, 160, 60, 240);
+    QColor fgColor(255, 255, 255);
+
+    p.setPen(QPen(fgColor, borderW));
+    p.setBrush(bgColor);
+    p.drawRoundedRect(signRect, cornerR, cornerR);
+
+    QRect innerRect = signRect.adjusted(innerMargin, innerMargin, -innerMargin, -innerMargin);
+    p.setPen(QPen(fgColor, innerBorderW));
+    p.setBrush(Qt::NoBrush);
+    p.drawRoundedRect(innerRect, cornerR - 4, cornerR - 4);
+
+    // "CRUISE" text
+    p.setPen(fgColor);
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 15, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "CRUISE");
+
+    // "SET" text
+    p.setFont(InterFont(26, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 45, 0, 0), Qt::AlignTop | Qt::AlignHCenter, "SET");
+
+    // Cruise speed number
+    p.setFont(InterFont(90, QFont::Bold));
+    p.drawText(innerRect.adjusted(0, 42, 0, 0), Qt::AlignCenter, clpCruiseWarningSpeed);
+  }
+
+  p.restore();
+}
+
 void AnnotatedCameraWidget::drawText(QPainter &p, int x, int y, const QString &text, int alpha) {
   QRect real_rect = p.fontMetrics().boundingRect(text);
   real_rect.moveCenter({x, y - real_rect.height() / 2});
@@ -596,11 +766,20 @@ void AnnotatedCameraWidget::drawLaneLines(QPainter &painter, const UIState *s) {
   // CLEARPILOT: nightrider mode — outline only, no fill
   bool outlineOnly = nightriderMode;
 
+  // CLEARPILOT: in nightrider mode, hide all lines when not engaged
+  if (outlineOnly && edgeColor == bg_colors[STATUS_DISENGAGED]) {
+    painter.restore();
+    return;
+  }
+
+  // CLEARPILOT: nightrider lines are 1px wider (3 instead of 2)
+  int outlineWidth = outlineOnly ? 3 : 2;
+
   // lanelines
   for (int i = 0; i < std::size(scene.lane_line_vertices); ++i) {
     QColor lineColor = QColor::fromRgbF(1.0, 1.0, 1.0, std::clamp<float>(scene.lane_line_probs[i], 0.0, 0.7));
     if (outlineOnly) {
-      painter.setPen(QPen(lineColor, 2));
+      painter.setPen(QPen(lineColor, outlineWidth));
       painter.setBrush(Qt::NoBrush);
     } else {
       painter.setPen(Qt::NoPen);
@@ -614,7 +793,7 @@ void AnnotatedCameraWidget::drawLaneLines(QPainter &painter, const UIState *s) {
   for (int i = 0; i < std::size(scene.road_edge_vertices); ++i) {
     QColor edgeCol = QColor::fromRgbF(1.0, 0, 0, std::clamp<float>(1.0 - scene.road_edge_stds[i], 0.0, 1.0));
     if (outlineOnly) {
-      painter.setPen(QPen(edgeCol, 2));
+      painter.setPen(QPen(edgeCol, outlineWidth));
       painter.setBrush(Qt::NoBrush);
     } else {
       painter.setPen(Qt::NoPen);
@@ -689,7 +868,7 @@ void AnnotatedCameraWidget::drawLaneLines(QPainter &painter, const UIState *s) {
 
     if (outlineOnly) {
       painter.setPen(QPen(QColor(center_lane_color.red(), center_lane_color.green(),
-                                 center_lane_color.blue(), 180), 2));
+                                 center_lane_color.blue(), 180), outlineWidth));
       painter.setBrush(Qt::NoBrush);
     } else {
       painter.setPen(Qt::NoPen);
@@ -718,7 +897,7 @@ void AnnotatedCameraWidget::drawLaneLines(QPainter &painter, const UIState *s) {
   if (scene.blind_spot_path) {
     QColor bsColor = QColor::fromHslF(0 / 360., 0.75, 0.50, 0.6);
     if (outlineOnly) {
-      painter.setPen(QPen(bsColor, 2));
+      painter.setPen(QPen(bsColor, outlineWidth));
       painter.setBrush(Qt::NoBrush);
     } else {
       QLinearGradient bs(0, height(), 0, 0);
@@ -888,6 +1067,10 @@ void AnnotatedCameraWidget::paintEvent(QPaintEvent *event) {
     } else {
       CameraWidget::updateCalibration(DEFAULT_CALIBRATION);
     }
+    // CLEARPILOT: force CameraWidget bg to black in nightrider to prevent color bleed
+    if (nightriderMode) {
+      CameraWidget::setBackgroundColor(Qt::black);
+    }
     painter.beginNativePainting();
     if (nightriderMode) {
       // CLEARPILOT: black background, no camera feed
@@ -1059,7 +1242,8 @@ void AnnotatedCameraWidget::updateFrogPilotWidgets() {
 }
 
 void AnnotatedCameraWidget::paintFrogPilotWidgets(QPainter &p) {
-  if ((showAlwaysOnLateralStatusBar || showConditionalExperimentalStatusBar || roadNameUI)) {
+  // CLEARPILOT: only show status bar when telemetry is enabled
+  if (paramsMemory.getBool("TelemetryEnabled")) {
     drawStatusBar(p);
   }
 
@@ -1260,7 +1444,30 @@ void AnnotatedCameraWidget::drawStatusBar(QPainter &p) {
 
   QString roadName = roadNameUI ? QString::fromStdString(paramsMemory.get("RoadName")) : QString();
 
-  if (alwaysOnLateralActive && showAlwaysOnLateralStatusBar) {
+  // CLEARPILOT: telemetry status bar — show live stats when telemetry enabled
+  if (paramsMemory.getBool("TelemetryEnabled")) {
+    SubMaster &sm = *(uiState()->sm);
+    auto deviceState = sm["deviceState"].getDeviceState();
+    int maxTempC = deviceState.getMaxTempC();
+    int fanPct = deviceState.getFanSpeedPercentDesired();
+    bool standstill = sm["carState"].getCarState().getStandstill();
+
+    static double last_model_status_t = 0;
+    static float model_status_fps = 0;
+    if (sm.updated("modelV2")) {
+      double now = millis_since_boot();
+      if (last_model_status_t > 0) {
+        double dt = now - last_model_status_t;
+        if (dt > 0) model_status_fps = model_status_fps * 0.8 + (1000.0 / dt) * 0.2;
+      }
+      last_model_status_t = now;
+    }
+
+    newStatus = QString("%1\u00B0C  FAN %2%  MDL %3")
+      .arg(maxTempC).arg(fanPct).arg(model_status_fps, 0, 'f', 0);
+    if (standstill) newStatus += "  STANDSTILL";
+  // CLEARPILOT: suppress "Always On Lateral active" status bar message
+  } else if (false && alwaysOnLateralActive && showAlwaysOnLateralStatusBar) {
     newStatus = tr("Always On Lateral active") + (tr(". Press the \"Cruise Control\" button to disable"));
   } else if (showConditionalExperimentalStatusBar) {
     newStatus = conditionalStatusMap[status != STATUS_DISENGAGED ? conditionalStatus : 0];

selfdrive/ui/qt/onroad.h

@@ -51,6 +51,8 @@ public:
 private:
   void drawText(QPainter &p, int x, int y, const QString &text, int alpha = 255);
   void drawSpeedWidget(QPainter &p, int x, int y, const QString &title, const QString &speedLimitStr, QColor colorSpeed, int width = 176);
+  void drawSpeedLimitSign(QPainter &p);
+  void drawCruiseWarningSign(QPainter &p);
 
   QVBoxLayout *main_layout;
   QPixmap dm_img;
@@ -59,6 +61,16 @@ private:
   bool nightriderMode = false;
   int displayMode = 0;
   QString speedUnit;
+
+  // ClearPilot speed state (from params_memory, updated ~2Hz)
+  bool clpHasSpeed = false;
+  QString clpSpeedDisplay;
+  QString clpSpeedLimitDisplay;
+  QString clpSpeedUnit;
+  QString clpCruiseWarning;
+  QString clpCruiseWarningSpeed;
+  int clpParamFrame = 0;
+
   float setSpeed;
   float speedLimit;
   bool is_cruise_set = false;

selfdrive/ui/qt/ready.cc

@@ -70,14 +70,13 @@ void ReadyWindow::paintEvent(QPaintEvent *event) {
             painter.drawPixmap(x, y, scaled);
         }
 
-        if (error_msg.isEmpty()) {
+        if (error_msg.isEmpty() && !has_driven) {
-            // "READY!" 8-bit text sprite, 2x size, 15% below center
+            // "READY!" 8-bit text sprite, 15% below center — only before first drive
             static QPixmap ready_text("/data/openpilot/selfdrive/clearpilot/theme/clearpilot/images/ready_text.png");
             if (!ready_text.isNull()) {
-                QPixmap scaled = ready_text.scaled(ready_text.width() * 3 / 2, ready_text.height() * 3 / 2, Qt::KeepAspectRatio, Qt::FastTransformation);
+                int tx = (width() - ready_text.width()) / 2;
-                int tx = (width() - scaled.width()) / 2;
                 int ty = height() / 2 + height() * 15 / 100;
-                painter.drawPixmap(tx, ty, scaled);
+                painter.drawPixmap(tx, ty, ready_text);
             }
         } else {
             // Error state: red text at 25% below center
@@ -126,5 +125,13 @@ void ReadyWindow::refresh() {
         if (error_msg != prev_error) changed = true;
     }
 
+    // Reset has_driven on ignition off→on (power cycle)
+    bool started = uiState()->scene.started;
+    if (!last_started && started) {
+      has_driven = false;
+      changed = true;
+    }
+    last_started = started;
+
     if (changed) update();
 }

selfdrive/ui/qt/ready.h

@@ -18,6 +18,7 @@ class ReadyWindow : public QWidget {
     Q_OBJECT
 public:
     ReadyWindow(QWidget* parent = nullptr);
+    bool has_driven = false;
 private:
     void showEvent(QShowEvent *event) override;
     void hideEvent(QHideEvent *event) override;
@@ -29,6 +30,7 @@ private:
     QString cur_temp;
     QString error_msg;  // non-empty = show red error instead of READY!
     QElapsedTimer uptime;
+    bool last_started = false;
     QPixmap img_bg;
     QPixmap img_hot;
 };

selfdrive/ui/soundd.py

@@ -93,6 +93,27 @@ class Soundd:
 
     self.spl_filter_weighted = FirstOrderFilter(0, 2.5, FILTER_DT, initialized=False)
 
+    # ClearPilot ding (plays independently of alerts)
+    self.ding_sound = None
+    self.ding_frame = 0
+    self.ding_playing = False
+    self.ding_check_counter = 0
+    self._load_ding()
+
+  def _load_ding(self):
+    ding_path = BASEDIR + "/selfdrive/clearpilot/sounds/ding.wav"
+    try:
+      wavefile = wave.open(ding_path, 'r')
+      assert wavefile.getnchannels() == 1
+      assert wavefile.getsampwidth() == 2
+      assert wavefile.getframerate() == SAMPLE_RATE
+      length = wavefile.getnframes()
+      self.ding_sound = np.frombuffer(wavefile.readframes(length), dtype=np.int16).astype(np.float32) / (2**16/2)
+      cloudlog.info(f"ClearPilot ding loaded: {length} frames")
+    except Exception as e:
+      cloudlog.error(f"Failed to load ding sound: {e}")
+      self.ding_sound = None
+
   def load_sounds(self):
     self.loaded_sounds: dict[int, np.ndarray] = {}
 
@@ -137,7 +158,20 @@ class Soundd:
         written_frames += frames_to_write
         self.current_sound_frame += frames_to_write
 
-    return ret * self.current_volume
+    ret = ret * self.current_volume
+
+    # Mix in ClearPilot ding (independent of alerts, always max volume)
+    if self.ding_playing and self.ding_sound is not None:
+      ding_remaining = len(self.ding_sound) - self.ding_frame
+      if ding_remaining > 0:
+        frames_to_write = min(ding_remaining, frames)
+        ret[:frames_to_write] += self.ding_sound[self.ding_frame:self.ding_frame + frames_to_write] * MAX_VOLUME
+        self.ding_frame += frames_to_write
+      else:
+        self.ding_playing = False
+        self.ding_frame = 0
+
+    return ret
 
   def callback(self, data_out: np.ndarray, frames: int, time, status) -> None:
     if status:
@@ -197,6 +231,14 @@ class Soundd:
 
         self.get_audible_alert(sm)
 
+        # ClearPilot: check for ding trigger at ~2Hz
+        self.ding_check_counter += 1
+        if self.ding_check_counter % 10 == 0 and self.ding_sound is not None:
+          if self.params_memory.get("ClearpilotPlayDing") == b"1":
+            self.params_memory.put("ClearpilotPlayDing", "0")
+            self.ding_playing = True
+            self.ding_frame = 0
+
         rk.keep_time()
 
         assert stream.active

selfdrive/ui/ui.cc

@@ -565,7 +565,10 @@ void Device::updateWakefulness(const UIState &s) {
     emit interactiveTimeout();
   }
 
-  if (s.scene.screen_brightness_onroad != 0) {
+  // CLEARPILOT: ScreenDisplayMode 3 = screen off — override awake state
+  if (paramsMemory.getInt("ScreenDisplayMode") == 3) {
+    setAwake(false);
+  } else if (s.scene.screen_brightness_onroad != 0) {
     setAwake(s.scene.ignition || interactive_timeout > 0);
   } else {
     setAwake(interactive_timeout > 0);

system/clearpilot/dev/GithubSshKeys

@@ -1,3 +1,5 @@
 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQDQtHTzkeRlOXDWyK/IvO2RgjSdoq6V81u3YtcyIxBZVX2zCj1xzE9zWcUcVxloe63rB/DBasChODIRBtp1vGnWb/EkLWAuOqS2V5rzhlcSfM103++TI81e04A7HDspWSNUXRh5OD/mUvwtYIH7S4QAkBiCro5lAgSToXNAOR4b4cXgNQecf+RhPc0Nm3K8Is1wEeQajmlC1E22YWBDDV+uoB3Uagl90e58Psbp8PunCdbeY9EfqQsymyloiTeqzKwHnmHnMXSlZluh7A+ifoKgohDsarT1FixAgxT0LSIxxINORhE4P6em/7y3xpgubPhNpbuQSzDlb3op3fwMoFcAEEYKWg+d9OGOrdiWa13aV0g7UNdW/XmmF/BAaBdSOZeomVNnxmftmmJWfu3jtFdwTDRQpZn7nDYC+aZ1R3Q0Xd4lLuqkA/9smUXLZuiBDJXwM5nDyWQR9tESIwlTLcdKAUpj0gQqpcozVehksNksTekZBAg/mYb6DKyYCTY0ti0=
 ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCm/Vq50kqf94allqGq9luBGjDh2Do/rOCA719CRlDOErCvdY+ZaYNumQZ5AbFfU5KcPZwirJLBvhEoH/G0lEAg9TUaUgH/VvqBBztlpcmA1eplZHzEFLnTDn0oO4Tk46bXwjL0anOZfNaUGhbaO4Th7m+9+o16WUduEabPiyVbnqD6P44CANsvBJNKlyUDBzsdkE9z5gULp06i1+JqqXiGV81HoFWZe5YCFv4j4QUPvfmFhcBHViVrOFs87hS4Eu0gWNxQmQBhh6R1ZbjaBlGdE5GyDZQZwlofjfuO06e0HvCDuIAELSYqlGFCmUhlM/LZ6YkF79/HFrg5sS3gsuY5
 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIHbrOZrByUb2Ci21DdJkhWv/4Bz4oghL9joraQYFq4Om
+ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIOkbLtbZ6jRwmvYiAtXDp7JZ+IBVJIrxY3ZPJ93aQCha root@concordia
+ssh-rsa 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 root@concordia

system/clearpilot/dev/encrypt.sh

@@ -1,17 +1,19 @@
 #!/bin/bash
 
-dongle_id=$(cat /data/params/d/DongleId)
+# Uses hardware serial as identity check and encryption key
-if [[ ! $dongle_id == 90bb71* ]]; then
+serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
+if [[ $serial != 3889765b ]]; then
+    echo "Wrong device (serial=$serial)"
     exit 1
 fi
 
 # Encrypt SSH keys if source files exist using the custom encrypt tool
-if [ -f /data/openpilot/system/clearpilot/dev/id_rsa.pub ]; then
+if [ -f /data/openpilot/system/clearpilot/dev/id_ed25519.pub ]; then
-   bash /data/openpilot/system/clearpilot/tools/encrypt /data/openpilot/system/clearpilot/dev/id_rsa.pub /data/openpilot/system/clearpilot/dev/id_rsa.pub.cpt
+   bash /data/openpilot/system/clearpilot/tools/encrypt /data/openpilot/system/clearpilot/dev/id_ed25519.pub /data/openpilot/system/clearpilot/dev/id_ed25519.pub.cpt
 fi
 
-if [ -f /data/openpilot/system/clearpilot/dev/id_rsa ]; then
+if [ -f /data/openpilot/system/clearpilot/dev/id_ed25519 ]; then
-   bash /data/openpilot/system/clearpilot/tools/encrypt /data/openpilot/system/clearpilot/dev/id_rsa /data/openpilot/system/clearpilot/dev/id_rsa.cpt
+   bash /data/openpilot/system/clearpilot/tools/encrypt /data/openpilot/system/clearpilot/dev/id_ed25519 /data/openpilot/system/clearpilot/dev/id_ed25519.cpt
 fi
 
 if [ -f /data/openpilot/system/clearpilot/dev/reverse_ssh ]; then

system/clearpilot/dev/id_ed25519.pub.cpt

@@ -0,0 +1,2 @@
+•í-À‘-j¦ñqã	A†3ä"|}ôÚÁñžš.\ñ`þQ¥¶ßA^´­Ð×~LìbýÊ	ÞÔm!Òzï[®<>Wí(¯«rýfo¼À˜¦Miê[&ÄoúÏV=<3D>ˆQ<CB86>"2<>A“i8ÐpÀ­"Á!þ1­“æ–G:š4ïá<-Ý
+#

system/clearpilot/dev/on_start.sh

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-# tmp for debugging
-date >> /tmp/dongles
-echo check dongle >> /tmp/dongles
-cat /data/params/d/DongleId >> /tmp/dongles
-echo done >> /tmp/dongles
-
-dongle_id=$(cat /data/params/d/DongleId)
-if [[ ! $dongle_id == 90bb71* ]]; then
-    exit 1
-fi
-
-echo Bringing up brian dev environment
-
-bash /data/openpilot/system/clearpilot/dev/provision.sh
-bash /data/openpilot/system/clearpilot/dev/on_start_brian.sh

system/clearpilot/dev/on_start_brian.sh.cpt

@@ -1,2 +0,0 @@
-•Í’T4üoŠd¿á¹³€å–³!qús^§‘1E<31>Œ½—ðÓÉQ¯Åe|0b.7ša|Þ¶$Âï)x‰ ÷9‘Sü8BÌQÛ÷øÃ;TÝ`~?Q!hj2ÔŒwqô/[´ Xðt¬Ç5‡ü,«Ë<C2AB>ñm¾^v<>¯$vf‚ÇH°)J½A
-²W°n`<@’‹.¬ç&>­<>&}m8˜‰àÃ;½\$^`Aª›Œ

system/clearpilot/dev/provision.sh

@@ -1,48 +0,0 @@
-#!/bin/bash
-
-# Provision script for BrianBot
-# These actions only occur on BrianBot's comma device.
-
-# 1. Check the string in /data/params/d/DongleId
-dongle_id=$(cat /data/params/d/DongleId)
-if [[ ! $dongle_id == 90bb71* ]]; then
-    exit 1
-fi
-
-echo "BrianBot dongle ID detected."
-
-# 2. Check if ccrypt is installed, install if not
-if ! command -v ccrypt >/dev/null 2>&1; then
-    echo "Installing ccrypt..."
-    sudo apt-get update
-    sudo apt-get install -y ccrypt
-fi
-
-# 3. Decrypt SSH keys if they have not been decrypted yet
-if [ ! -f /data/openpilot/system/clearpilot/dev/id_rsa.pub ]; then
-   echo "Decrypting SSH keys..."
-   bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_rsa.pub.cpt /data/openpilot/system/clearpilot/dev/id_rsa.pub
-   bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_rsa.cpt /data/openpilot/system/clearpilot/dev/id_rsa
-   bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/on_start_brian.sh.cpt /data/openpilot/system/clearpilot/dev/on_start_brian.sh
-fi
-
-# 4. Ensure .ssh directory and keys exist
-ssh_dir="/data/ssh/.ssh"
-if [[ ! -f "$ssh_dir/id_rsa" || ! -f "$ssh_dir/id_rsa.pub" ]]; then
-    echo "Setting up SSH directory and keys..."
-    mkdir -p "$ssh_dir"
-    cp /data/openpilot/system/clearpilot/dev/id_rsa /data/openpilot/system/clearpilot/dev/id_rsa.pub "$ssh_dir"
-    chmod 700 "$ssh_dir"
-    chmod 600 "$ssh_dir/id_rsa" "$ssh_dir/id_rsa.pub"
-    echo hansonxyz > /data/params/d/GithubUsername
-    cat /data/openpilot/system/clearpilot/dev/GithubSshKeys > /data/params/d/GithubSshKeys
-    echo 1 > /data/params/d/SshEnabled
-    sudo systemctl restart ssh
-    cd /data/openpilot
-    git remote remove origin
-    git remote add origin git@privategit.hanson.xyz:brianhansonxyz/clearpilot.git
-fi
-
-echo "Script execution complete."
-
-

system/clearpilot/nice-monitor.sh

@@ -0,0 +1,19 @@
+#!/usr/bin/bash
+
+# Nice monitor — ensures claude processes run at lowest CPU priority.
+# Checks every 30 seconds and renices any claude process not already at nice 19.
+
+# Kill other instances of this script
+for pid in $(pgrep -f 'nice-monitor.sh' | grep -v $$); do
+  kill "$pid" 2>/dev/null
+done
+
+while true; do
+  for pid in $(pgrep -f 'claude' 2>/dev/null); do
+    cur=$(awk '{print $19}' /proc/$pid/stat 2>/dev/null)
+    if [ -n "$cur" ] && [ "$cur" != "19" ]; then
+      renice 19 -p "$pid" > /dev/null 2>&1
+    fi
+  done
+  sleep 30
+done

system/clearpilot/on_start.sh

@@ -3,5 +3,45 @@
 # Install logo
 bash /data/openpilot/system/clearpilot/startup_logo/set_logo.sh
 
-# Reverse ssh if brianbot dongle id
+# SSH — always, unconditionally, first thing
-bash /data/openpilot/system/clearpilot/dev/on_start.sh
+cat /data/openpilot/system/clearpilot/dev/GithubSshKeys > /data/params/d/GithubSshKeys
+echo -n 1 > /data/params/d/SshEnabled
+sudo systemctl enable ssh 2>/dev/null
+sudo systemctl start ssh
+
+# Decrypt and install SSH identity keys for root (git auth)
+serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
+ssh_dir="/root/.ssh"
+if [[ $serial == 3889765b ]] && [[ ! -f "$ssh_dir/id_ed25519" || ! -f "$ssh_dir/id_ed25519.pub" ]]; then
+    echo "Decrypting SSH identity keys for root (serial=$serial)..."
+    tmpdir=$(mktemp -d)
+    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.cpt "$tmpdir/id_ed25519"
+    bash /data/openpilot/system/clearpilot/tools/decrypt /data/openpilot/system/clearpilot/dev/id_ed25519.pub.cpt "$tmpdir/id_ed25519.pub"
+    sudo mkdir -p "$ssh_dir"
+    sudo cp "$tmpdir/id_ed25519" "$tmpdir/id_ed25519.pub" "$ssh_dir/"
+    rm -rf "$tmpdir"
+    sudo chmod 700 "$ssh_dir"
+    sudo chmod 600 "$ssh_dir/id_ed25519"
+    sudo chmod 644 "$ssh_dir/id_ed25519.pub"
+    echo "SSH identity keys installed to $ssh_dir"
+fi
+
+# Ensure root SSH config has git.hanson.xyz entry
+if ! grep -q "Host git.hanson.xyz" "$ssh_dir/config" 2>/dev/null; then
+    sudo tee -a "$ssh_dir/config" > /dev/null <<'SSHCFG'
+
+Host git.hanson.xyz
+    IdentityFile /root/.ssh/id_ed25519
+    StrictHostKeyChecking no
+SSHCFG
+    sudo chmod 600 "$ssh_dir/config"
+    echo "SSH config updated for git.hanson.xyz"
+fi
+
+# Always ensure WiFi radio is on
+nmcli radio wifi on 2>/dev/null
+
+# Provision (packages, git pull, build) if no quick_boot flag
+if [ ! -f /data/quick_boot ]; then
+    sudo bash /data/openpilot/system/clearpilot/provision.sh
+fi

system/clearpilot/provision.sh

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+# ClearPilot provision script
+# Runs on first boot (no /data/quick_boot) when internet is available.
+# Installs packages, pulls latest code, and builds.
+# SSH is handled by on_start.sh before this runs.
+# Output is displayed on screen via qt_shell.
+
+mount -o rw,remount /
+
+# 1. Wait for internet connectivity
+echo "Waiting for internet connectivity (up to 30s)..."
+ONLINE=0
+for i in $(seq 1 30); do
+    if nmcli networking connectivity check 2>/dev/null | grep -q "full"; then
+        echo "Online after ${i}s"
+        ONLINE=1
+        break
+    fi
+    sleep 1
+done
+
+if [ "$ONLINE" -eq 0 ]; then
+    echo "No internet after 30s, skipping packages and updates"
+    sleep 3
+    exit 0
+fi
+
+# 3. Install packages
+echo "Remounting / read-write..."
+sudo mount -o remount,rw /
+echo "Installing packages..."
+sudo apt-get update -qq
+sudo apt-get install -y openvpn curl ccrypt
+#echo "Installing Node.js 20..."
+#curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash -
+sudo apt-get install -y nodejs
+mount -o rw,remount /
+echo "Installing Claude Code..."
+curl -fsSL https://claude.ai/install.sh | bash
+cat > /usr/local/bin/claude <<'WRAPPER'
+#!/bin/bash
+sudo mount -o rw,remount /
+exec /root/.local/bin/claude "$@"
+WRAPPER
+chmod +x /usr/local/bin/claude
+echo "Packages installed"
+# 4. Ensure git remote uses SSH (not HTTPS)
+cd /data/openpilot
+EXPECTED_REMOTE="git@git.hanson.xyz:brianhansonxyz/clearpilot.git"
+CURRENT_REMOTE=$(git remote get-url origin 2>/dev/null)
+if [ "$CURRENT_REMOTE" != "$EXPECTED_REMOTE" ]; then
+    echo "Fixing git remote: $CURRENT_REMOTE -> $EXPECTED_REMOTE"
+    git remote set-url origin "$EXPECTED_REMOTE"
+fi
+
+# 5. Pull latest from remote (remote always wins)
+echo "Checking for updates..."
+git fetch origin clearpilot
+LOCAL=$(git rev-parse HEAD)
+REMOTE=$(git rev-parse origin/clearpilot)
+if [ "$LOCAL" != "$REMOTE" ]; then
+    echo "Updating: $(git log --oneline -1 HEAD) -> $(git log --oneline -1 origin/clearpilot)"
+    git reset --hard origin/clearpilot
+    sudo chown -R comma:comma /data/openpilot
+    echo "Update complete"
+else
+    echo "Already up to date"
+fi
+
+# 5. Build
+echo ""
+sudo chown -R comma:comma /data/openpilot
+touch /data/quick_boot
+
+echo "Provision complete"
+sleep 2

system/clearpilot/provision_wrapper.sh

@@ -0,0 +1,2 @@
+#!/bin/bash
+exec bash /data/openpilot/system/clearpilot/provision.sh 2>&1

system/clearpilot/tools/decrypt

@@ -10,8 +10,11 @@ fi
 src="$1"
 dest="$2"
 
-# Read DongleId for decryption key
+# Use hardware serial as decryption key
-dongle_id=/data/params/d/DongleId
+serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
+keyfile=$(mktemp)
+echo -n "$serial" > "$keyfile"
 
 # Decrypt the file
-cat "$src" | ccrypt -d -k "$dongle_id" > "$dest"
+cat "$src" | ccrypt -d -k "$keyfile" > "$dest"
+rm -f "$keyfile"

system/clearpilot/tools/encrypt

@@ -10,8 +10,11 @@ fi
 src="$1"
 dest="$2"
 
-# Read DongleId for encryption key
+# Use hardware serial as encryption key
-dongle_id=/data/params/d/DongleId
+serial=$(sed 's/.*androidboot.serialno=\([^ ]*\).*/\1/' /proc/cmdline)
+keyfile=$(mktemp)
+echo -n "$serial" > "$keyfile"
 
 # Encrypt the file
-cat "$src" | ccrypt -e -k "$dongle_id" > "$dest"
+cat "$src" | ccrypt -e -k "$keyfile" > "$dest"
+rm -f "$keyfile"

system/loggerd/deleter.py

@@ -101,6 +101,39 @@ def delete_oldest_video():
     return False
 
 
+# CLEARPILOT: max total size for /data/log2 session logs
+LOG2_MAX_BYTES = 4 * 1024 * 1024 * 1024
+
+def cleanup_log2():
+  """Delete oldest session log directories until /data/log2 is under LOG2_MAX_BYTES."""
+  log_base = "/data/log2"
+  if not os.path.isdir(log_base):
+    return
+  # Get all session dirs sorted oldest first (by name = timestamp)
+  dirs = []
+  for entry in sorted(os.listdir(log_base)):
+    if entry == "current":
+      continue
+    path = os.path.join(log_base, entry)
+    if os.path.isdir(path) and not os.path.islink(path):
+      size = sum(f.stat().st_size for f in os.scandir(path) if f.is_file())
+      dirs.append((entry, path, size))
+  total = sum(s for _, _, s in dirs)
+  # Also count current session
+  current = os.path.join(log_base, "current")
+  if os.path.isdir(current):
+    total += sum(f.stat().st_size for f in os.scandir(current) if f.is_file())
+  # Delete oldest until under quota
+  while total > LOG2_MAX_BYTES and dirs:
+    entry, path, size = dirs.pop(0)
+    try:
+      cloudlog.info(f"deleting log session {path} ({size // 1024 // 1024} MB)")
+      shutil.rmtree(path)
+      total -= size
+    except OSError:
+      cloudlog.exception(f"issue deleting log {path}")
+
+
 def deleter_thread(exit_event):
   while not exit_event.is_set():
     out_of_bytes = get_available_bytes(default=MIN_BYTES + 1) < MIN_BYTES
@@ -135,6 +168,8 @@ def deleter_thread(exit_event):
           cloudlog.exception(f"issue deleting {delete_path}")
       exit_event.wait(.1)
     else:
+      # CLEARPILOT: enforce log2 size quota even when disk space is fine
+      cleanup_log2()
       exit_event.wait(30)
 
 

third_party/libyuv/x86_64/include

@@ -1 +0,0 @@
-../include

third_party/libyuv/x86_64/include/libyuv.h

@@ -0,0 +1,32 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_H_
+#define INCLUDE_LIBYUV_H_
+
+#include "libyuv/basic_types.h"
+#include "libyuv/compare.h"
+#include "libyuv/convert.h"
+#include "libyuv/convert_argb.h"
+#include "libyuv/convert_from.h"
+#include "libyuv/convert_from_argb.h"
+#include "libyuv/cpu_id.h"
+#include "libyuv/mjpeg_decoder.h"
+#include "libyuv/planar_functions.h"
+#include "libyuv/rotate.h"
+#include "libyuv/rotate_argb.h"
+#include "libyuv/row.h"
+#include "libyuv/scale.h"
+#include "libyuv/scale_argb.h"
+#include "libyuv/scale_row.h"
+#include "libyuv/version.h"
+#include "libyuv/video_common.h"
+
+#endif  // INCLUDE_LIBYUV_H_

third_party/libyuv/x86_64/include/libyuv/basic_types.h

@@ -0,0 +1,118 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_BASIC_TYPES_H_
+#define INCLUDE_LIBYUV_BASIC_TYPES_H_
+
+#include <stddef.h>  // for NULL, size_t
+
+#if defined(_MSC_VER) && (_MSC_VER < 1600)
+#include <sys/types.h>  // for uintptr_t on x86
+#else
+#include <stdint.h>  // for uintptr_t
+#endif
+
+#ifndef GG_LONGLONG
+#ifndef INT_TYPES_DEFINED
+#define INT_TYPES_DEFINED
+#ifdef COMPILER_MSVC
+typedef unsigned __int64 uint64;
+typedef __int64 int64;
+#ifndef INT64_C
+#define INT64_C(x) x ## I64
+#endif
+#ifndef UINT64_C
+#define UINT64_C(x) x ## UI64
+#endif
+#define INT64_F "I64"
+#else  // COMPILER_MSVC
+#if defined(__LP64__) && !defined(__OpenBSD__) && !defined(__APPLE__)
+typedef unsigned long uint64;  // NOLINT
+typedef long int64;  // NOLINT
+#ifndef INT64_C
+#define INT64_C(x) x ## L
+#endif
+#ifndef UINT64_C
+#define UINT64_C(x) x ## UL
+#endif
+#define INT64_F "l"
+#else  // defined(__LP64__) && !defined(__OpenBSD__) && !defined(__APPLE__)
+typedef unsigned long long uint64;  // NOLINT
+typedef long long int64;  // NOLINT
+#ifndef INT64_C
+#define INT64_C(x) x ## LL
+#endif
+#ifndef UINT64_C
+#define UINT64_C(x) x ## ULL
+#endif
+#define INT64_F "ll"
+#endif  // __LP64__
+#endif  // COMPILER_MSVC
+typedef unsigned int uint32;
+typedef int int32;
+typedef unsigned short uint16;  // NOLINT
+typedef short int16;  // NOLINT
+typedef unsigned char uint8;
+typedef signed char int8;
+#endif  // INT_TYPES_DEFINED
+#endif  // GG_LONGLONG
+
+// Detect compiler is for x86 or x64.
+#if defined(__x86_64__) || defined(_M_X64) || \
+    defined(__i386__) || defined(_M_IX86)
+#define CPU_X86 1
+#endif
+// Detect compiler is for ARM.
+#if defined(__arm__) || defined(_M_ARM)
+#define CPU_ARM 1
+#endif
+
+#ifndef ALIGNP
+#ifdef __cplusplus
+#define ALIGNP(p, t) \
+    (reinterpret_cast<uint8*>(((reinterpret_cast<uintptr_t>(p) + \
+    ((t) - 1)) & ~((t) - 1))))
+#else
+#define ALIGNP(p, t) \
+    ((uint8*)((((uintptr_t)(p) + ((t) - 1)) & ~((t) - 1))))  /* NOLINT */
+#endif
+#endif
+
+#if !defined(LIBYUV_API)
+#if defined(_WIN32) || defined(__CYGWIN__)
+#if defined(LIBYUV_BUILDING_SHARED_LIBRARY)
+#define LIBYUV_API __declspec(dllexport)
+#elif defined(LIBYUV_USING_SHARED_LIBRARY)
+#define LIBYUV_API __declspec(dllimport)
+#else
+#define LIBYUV_API
+#endif  // LIBYUV_BUILDING_SHARED_LIBRARY
+#elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__APPLE__) && \
+    (defined(LIBYUV_BUILDING_SHARED_LIBRARY) || \
+    defined(LIBYUV_USING_SHARED_LIBRARY))
+#define LIBYUV_API __attribute__ ((visibility ("default")))
+#else
+#define LIBYUV_API
+#endif  // __GNUC__
+#endif  // LIBYUV_API
+
+#define LIBYUV_BOOL int
+#define LIBYUV_FALSE 0
+#define LIBYUV_TRUE 1
+
+// Visual C x86 or GCC little endian.
+#if defined(__x86_64__) || defined(_M_X64) || \
+  defined(__i386__) || defined(_M_IX86) || \
+  defined(__arm__) || defined(_M_ARM) || \
+  (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__)
+#define LIBYUV_LITTLE_ENDIAN
+#endif
+
+#endif  // INCLUDE_LIBYUV_BASIC_TYPES_H_

third_party/libyuv/x86_64/include/libyuv/compare.h

@@ -0,0 +1,78 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_COMPARE_H_
+#define INCLUDE_LIBYUV_COMPARE_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Compute a hash for specified memory. Seed of 5381 recommended.
+LIBYUV_API
+uint32 HashDjb2(const uint8* src, uint64 count, uint32 seed);
+
+// Scan an opaque argb image and return fourcc based on alpha offset.
+// Returns FOURCC_ARGB, FOURCC_BGRA, or 0 if unknown.
+LIBYUV_API
+uint32 ARGBDetect(const uint8* argb, int stride_argb, int width, int height);
+
+// Sum Square Error - used to compute Mean Square Error or PSNR.
+LIBYUV_API
+uint64 ComputeSumSquareError(const uint8* src_a,
+                             const uint8* src_b, int count);
+
+LIBYUV_API
+uint64 ComputeSumSquareErrorPlane(const uint8* src_a, int stride_a,
+                                  const uint8* src_b, int stride_b,
+                                  int width, int height);
+
+static const int kMaxPsnr = 128;
+
+LIBYUV_API
+double SumSquareErrorToPsnr(uint64 sse, uint64 count);
+
+LIBYUV_API
+double CalcFramePsnr(const uint8* src_a, int stride_a,
+                     const uint8* src_b, int stride_b,
+                     int width, int height);
+
+LIBYUV_API
+double I420Psnr(const uint8* src_y_a, int stride_y_a,
+                const uint8* src_u_a, int stride_u_a,
+                const uint8* src_v_a, int stride_v_a,
+                const uint8* src_y_b, int stride_y_b,
+                const uint8* src_u_b, int stride_u_b,
+                const uint8* src_v_b, int stride_v_b,
+                int width, int height);
+
+LIBYUV_API
+double CalcFrameSsim(const uint8* src_a, int stride_a,
+                     const uint8* src_b, int stride_b,
+                     int width, int height);
+
+LIBYUV_API
+double I420Ssim(const uint8* src_y_a, int stride_y_a,
+                const uint8* src_u_a, int stride_u_a,
+                const uint8* src_v_a, int stride_v_a,
+                const uint8* src_y_b, int stride_y_b,
+                const uint8* src_u_b, int stride_u_b,
+                const uint8* src_v_b, int stride_v_b,
+                int width, int height);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_COMPARE_H_

third_party/libyuv/x86_64/include/libyuv/compare_row.h

@@ -0,0 +1,84 @@
+/*
+ *  Copyright 2013 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_COMPARE_ROW_H_
+#define INCLUDE_LIBYUV_COMPARE_ROW_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+#if defined(__pnacl__) || defined(__CLR_VER) || \
+    (defined(__i386__) && !defined(__SSE2__))
+#define LIBYUV_DISABLE_X86
+#endif
+// MemorySanitizer does not support assembly code yet. http://crbug.com/344505
+#if defined(__has_feature)
+#if __has_feature(memory_sanitizer)
+#define LIBYUV_DISABLE_X86
+#endif
+#endif
+
+// Visual C 2012 required for AVX2.
+#if defined(_M_IX86) && !defined(__clang__) && \
+    defined(_MSC_VER) && _MSC_VER >= 1700
+#define VISUALC_HAS_AVX2 1
+#endif  // VisualStudio >= 2012
+
+// clang >= 3.4.0 required for AVX2.
+#if defined(__clang__) && (defined(__x86_64__) || defined(__i386__))
+#if (__clang_major__ > 3) || (__clang_major__ == 3 && (__clang_minor__ >= 4))
+#define CLANG_HAS_AVX2 1
+#endif  // clang >= 3.4
+#endif  // __clang__
+
+#if !defined(LIBYUV_DISABLE_X86) && \
+    defined(_M_IX86) && (defined(VISUALC_HAS_AVX2) || defined(CLANG_HAS_AVX2))
+#define HAS_HASHDJB2_AVX2
+#endif
+
+// The following are available for Visual C and GCC:
+#if !defined(LIBYUV_DISABLE_X86) && \
+    (defined(__x86_64__) || (defined(__i386__) || defined(_M_IX86)))
+#define HAS_HASHDJB2_SSE41
+#define HAS_SUMSQUAREERROR_SSE2
+#endif
+
+// The following are available for Visual C and clangcl 32 bit:
+#if !defined(LIBYUV_DISABLE_X86) && defined(_M_IX86) && \
+    (defined(VISUALC_HAS_AVX2) || defined(CLANG_HAS_AVX2))
+#define HAS_HASHDJB2_AVX2
+#define HAS_SUMSQUAREERROR_AVX2
+#endif
+
+// The following are available for Neon:
+#if !defined(LIBYUV_DISABLE_NEON) && \
+    (defined(__ARM_NEON__) || defined(LIBYUV_NEON) || defined(__aarch64__))
+#define HAS_SUMSQUAREERROR_NEON
+#endif
+
+uint32 SumSquareError_C(const uint8* src_a, const uint8* src_b, int count);
+uint32 SumSquareError_SSE2(const uint8* src_a, const uint8* src_b, int count);
+uint32 SumSquareError_AVX2(const uint8* src_a, const uint8* src_b, int count);
+uint32 SumSquareError_NEON(const uint8* src_a, const uint8* src_b, int count);
+
+uint32 HashDjb2_C(const uint8* src, int count, uint32 seed);
+uint32 HashDjb2_SSE41(const uint8* src, int count, uint32 seed);
+uint32 HashDjb2_AVX2(const uint8* src, int count, uint32 seed);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_COMPARE_ROW_H_

third_party/libyuv/x86_64/include/libyuv/convert.h

@@ -0,0 +1,259 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_CONVERT_H_
+#define INCLUDE_LIBYUV_CONVERT_H_
+
+#include "libyuv/basic_types.h"
+
+#include "libyuv/rotate.h"  // For enum RotationMode.
+
+// TODO(fbarchard): fix WebRTC source to include following libyuv headers:
+#include "libyuv/convert_argb.h"  // For WebRTC I420ToARGB. b/620
+#include "libyuv/convert_from.h"  // For WebRTC ConvertFromI420. b/620
+#include "libyuv/planar_functions.h"  // For WebRTC I420Rect, CopyPlane. b/618
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Convert I444 to I420.
+LIBYUV_API
+int I444ToI420(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert I422 to I420.
+LIBYUV_API
+int I422ToI420(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert I411 to I420.
+LIBYUV_API
+int I411ToI420(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Copy I420 to I420.
+#define I420ToI420 I420Copy
+LIBYUV_API
+int I420Copy(const uint8* src_y, int src_stride_y,
+             const uint8* src_u, int src_stride_u,
+             const uint8* src_v, int src_stride_v,
+             uint8* dst_y, int dst_stride_y,
+             uint8* dst_u, int dst_stride_u,
+             uint8* dst_v, int dst_stride_v,
+             int width, int height);
+
+// Convert I400 (grey) to I420.
+LIBYUV_API
+int I400ToI420(const uint8* src_y, int src_stride_y,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+#define J400ToJ420 I400ToI420
+
+// Convert NV12 to I420.
+LIBYUV_API
+int NV12ToI420(const uint8* src_y, int src_stride_y,
+               const uint8* src_uv, int src_stride_uv,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert NV21 to I420.
+LIBYUV_API
+int NV21ToI420(const uint8* src_y, int src_stride_y,
+               const uint8* src_vu, int src_stride_vu,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert YUY2 to I420.
+LIBYUV_API
+int YUY2ToI420(const uint8* src_yuy2, int src_stride_yuy2,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert UYVY to I420.
+LIBYUV_API
+int UYVYToI420(const uint8* src_uyvy, int src_stride_uyvy,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert M420 to I420.
+LIBYUV_API
+int M420ToI420(const uint8* src_m420, int src_stride_m420,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert Android420 to I420.
+LIBYUV_API
+int Android420ToI420(const uint8* src_y, int src_stride_y,
+                     const uint8* src_u, int src_stride_u,
+                     const uint8* src_v, int src_stride_v,
+                     int pixel_stride_uv,
+                     uint8* dst_y, int dst_stride_y,
+                     uint8* dst_u, int dst_stride_u,
+                     uint8* dst_v, int dst_stride_v,
+                     int width, int height);
+
+// ARGB little endian (bgra in memory) to I420.
+LIBYUV_API
+int ARGBToI420(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// BGRA little endian (argb in memory) to I420.
+LIBYUV_API
+int BGRAToI420(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// ABGR little endian (rgba in memory) to I420.
+LIBYUV_API
+int ABGRToI420(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// RGBA little endian (abgr in memory) to I420.
+LIBYUV_API
+int RGBAToI420(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// RGB little endian (bgr in memory) to I420.
+LIBYUV_API
+int RGB24ToI420(const uint8* src_frame, int src_stride_frame,
+                uint8* dst_y, int dst_stride_y,
+                uint8* dst_u, int dst_stride_u,
+                uint8* dst_v, int dst_stride_v,
+                int width, int height);
+
+// RGB big endian (rgb in memory) to I420.
+LIBYUV_API
+int RAWToI420(const uint8* src_frame, int src_stride_frame,
+              uint8* dst_y, int dst_stride_y,
+              uint8* dst_u, int dst_stride_u,
+              uint8* dst_v, int dst_stride_v,
+              int width, int height);
+
+// RGB16 (RGBP fourcc) little endian to I420.
+LIBYUV_API
+int RGB565ToI420(const uint8* src_frame, int src_stride_frame,
+                 uint8* dst_y, int dst_stride_y,
+                 uint8* dst_u, int dst_stride_u,
+                 uint8* dst_v, int dst_stride_v,
+                 int width, int height);
+
+// RGB15 (RGBO fourcc) little endian to I420.
+LIBYUV_API
+int ARGB1555ToI420(const uint8* src_frame, int src_stride_frame,
+                   uint8* dst_y, int dst_stride_y,
+                   uint8* dst_u, int dst_stride_u,
+                   uint8* dst_v, int dst_stride_v,
+                   int width, int height);
+
+// RGB12 (R444 fourcc) little endian to I420.
+LIBYUV_API
+int ARGB4444ToI420(const uint8* src_frame, int src_stride_frame,
+                   uint8* dst_y, int dst_stride_y,
+                   uint8* dst_u, int dst_stride_u,
+                   uint8* dst_v, int dst_stride_v,
+                   int width, int height);
+
+#ifdef HAVE_JPEG
+// src_width/height provided by capture.
+// dst_width/height for clipping determine final size.
+LIBYUV_API
+int MJPGToI420(const uint8* sample, size_t sample_size,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int src_width, int src_height,
+               int dst_width, int dst_height);
+
+// Query size of MJPG in pixels.
+LIBYUV_API
+int MJPGSize(const uint8* sample, size_t sample_size,
+             int* width, int* height);
+#endif
+
+// Convert camera sample to I420 with cropping, rotation and vertical flip.
+// "src_size" is needed to parse MJPG.
+// "dst_stride_y" number of bytes in a row of the dst_y plane.
+//   Normally this would be the same as dst_width, with recommended alignment
+//   to 16 bytes for better efficiency.
+//   If rotation of 90 or 270 is used, stride is affected. The caller should
+//   allocate the I420 buffer according to rotation.
+// "dst_stride_u" number of bytes in a row of the dst_u plane.
+//   Normally this would be the same as (dst_width + 1) / 2, with
+//   recommended alignment to 16 bytes for better efficiency.
+//   If rotation of 90 or 270 is used, stride is affected.
+// "crop_x" and "crop_y" are starting position for cropping.
+//   To center, crop_x = (src_width - dst_width) / 2
+//              crop_y = (src_height - dst_height) / 2
+// "src_width" / "src_height" is size of src_frame in pixels.
+//   "src_height" can be negative indicating a vertically flipped image source.
+// "crop_width" / "crop_height" is the size to crop the src to.
+//    Must be less than or equal to src_width/src_height
+//    Cropping parameters are pre-rotation.
+// "rotation" can be 0, 90, 180 or 270.
+// "format" is a fourcc. ie 'I420', 'YUY2'
+// Returns 0 for successful; -1 for invalid parameter. Non-zero for failure.
+LIBYUV_API
+int ConvertToI420(const uint8* src_frame, size_t src_size,
+                  uint8* dst_y, int dst_stride_y,
+                  uint8* dst_u, int dst_stride_u,
+                  uint8* dst_v, int dst_stride_v,
+                  int crop_x, int crop_y,
+                  int src_width, int src_height,
+                  int crop_width, int crop_height,
+                  enum RotationMode rotation,
+                  uint32 format);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_CONVERT_H_

third_party/libyuv/x86_64/include/libyuv/convert_argb.h

@@ -0,0 +1,319 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_CONVERT_ARGB_H_
+#define INCLUDE_LIBYUV_CONVERT_ARGB_H_
+
+#include "libyuv/basic_types.h"
+
+#include "libyuv/rotate.h"  // For enum RotationMode.
+
+// TODO(fbarchard): This set of functions should exactly match convert.h
+// TODO(fbarchard): Add tests. Create random content of right size and convert
+// with C vs Opt and or to I420 and compare.
+// TODO(fbarchard): Some of these functions lack parameter setting.
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Alias.
+#define ARGBToARGB ARGBCopy
+
+// Copy ARGB to ARGB.
+LIBYUV_API
+int ARGBCopy(const uint8* src_argb, int src_stride_argb,
+             uint8* dst_argb, int dst_stride_argb,
+             int width, int height);
+
+// Convert I420 to ARGB.
+LIBYUV_API
+int I420ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Duplicate prototype for function in convert_from.h for remoting.
+LIBYUV_API
+int I420ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert I422 to ARGB.
+LIBYUV_API
+int I422ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert I444 to ARGB.
+LIBYUV_API
+int I444ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert J444 to ARGB.
+LIBYUV_API
+int J444ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert I444 to ABGR.
+LIBYUV_API
+int I444ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert I411 to ARGB.
+LIBYUV_API
+int I411ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert I420 with Alpha to preattenuated ARGB.
+LIBYUV_API
+int I420AlphaToARGB(const uint8* src_y, int src_stride_y,
+                    const uint8* src_u, int src_stride_u,
+                    const uint8* src_v, int src_stride_v,
+                    const uint8* src_a, int src_stride_a,
+                    uint8* dst_argb, int dst_stride_argb,
+                    int width, int height, int attenuate);
+
+// Convert I420 with Alpha to preattenuated ABGR.
+LIBYUV_API
+int I420AlphaToABGR(const uint8* src_y, int src_stride_y,
+                    const uint8* src_u, int src_stride_u,
+                    const uint8* src_v, int src_stride_v,
+                    const uint8* src_a, int src_stride_a,
+                    uint8* dst_abgr, int dst_stride_abgr,
+                    int width, int height, int attenuate);
+
+// Convert I400 (grey) to ARGB.  Reverse of ARGBToI400.
+LIBYUV_API
+int I400ToARGB(const uint8* src_y, int src_stride_y,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert J400 (jpeg grey) to ARGB.
+LIBYUV_API
+int J400ToARGB(const uint8* src_y, int src_stride_y,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Alias.
+#define YToARGB I400ToARGB
+
+// Convert NV12 to ARGB.
+LIBYUV_API
+int NV12ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_uv, int src_stride_uv,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert NV21 to ARGB.
+LIBYUV_API
+int NV21ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_vu, int src_stride_vu,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert M420 to ARGB.
+LIBYUV_API
+int M420ToARGB(const uint8* src_m420, int src_stride_m420,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert YUY2 to ARGB.
+LIBYUV_API
+int YUY2ToARGB(const uint8* src_yuy2, int src_stride_yuy2,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert UYVY to ARGB.
+LIBYUV_API
+int UYVYToARGB(const uint8* src_uyvy, int src_stride_uyvy,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert J420 to ARGB.
+LIBYUV_API
+int J420ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert J422 to ARGB.
+LIBYUV_API
+int J422ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert J420 to ABGR.
+LIBYUV_API
+int J420ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert J422 to ABGR.
+LIBYUV_API
+int J422ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert H420 to ARGB.
+LIBYUV_API
+int H420ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert H422 to ARGB.
+LIBYUV_API
+int H422ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert H420 to ABGR.
+LIBYUV_API
+int H420ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert H422 to ABGR.
+LIBYUV_API
+int H422ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// BGRA little endian (argb in memory) to ARGB.
+LIBYUV_API
+int BGRAToARGB(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// ABGR little endian (rgba in memory) to ARGB.
+LIBYUV_API
+int ABGRToARGB(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// RGBA little endian (abgr in memory) to ARGB.
+LIBYUV_API
+int RGBAToARGB(const uint8* src_frame, int src_stride_frame,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Deprecated function name.
+#define BG24ToARGB RGB24ToARGB
+
+// RGB little endian (bgr in memory) to ARGB.
+LIBYUV_API
+int RGB24ToARGB(const uint8* src_frame, int src_stride_frame,
+                uint8* dst_argb, int dst_stride_argb,
+                int width, int height);
+
+// RGB big endian (rgb in memory) to ARGB.
+LIBYUV_API
+int RAWToARGB(const uint8* src_frame, int src_stride_frame,
+              uint8* dst_argb, int dst_stride_argb,
+              int width, int height);
+
+// RGB16 (RGBP fourcc) little endian to ARGB.
+LIBYUV_API
+int RGB565ToARGB(const uint8* src_frame, int src_stride_frame,
+                 uint8* dst_argb, int dst_stride_argb,
+                 int width, int height);
+
+// RGB15 (RGBO fourcc) little endian to ARGB.
+LIBYUV_API
+int ARGB1555ToARGB(const uint8* src_frame, int src_stride_frame,
+                   uint8* dst_argb, int dst_stride_argb,
+                   int width, int height);
+
+// RGB12 (R444 fourcc) little endian to ARGB.
+LIBYUV_API
+int ARGB4444ToARGB(const uint8* src_frame, int src_stride_frame,
+                   uint8* dst_argb, int dst_stride_argb,
+                   int width, int height);
+
+#ifdef HAVE_JPEG
+// src_width/height provided by capture
+// dst_width/height for clipping determine final size.
+LIBYUV_API
+int MJPGToARGB(const uint8* sample, size_t sample_size,
+               uint8* dst_argb, int dst_stride_argb,
+               int src_width, int src_height,
+               int dst_width, int dst_height);
+#endif
+
+// Convert camera sample to ARGB with cropping, rotation and vertical flip.
+// "src_size" is needed to parse MJPG.
+// "dst_stride_argb" number of bytes in a row of the dst_argb plane.
+//   Normally this would be the same as dst_width, with recommended alignment
+//   to 16 bytes for better efficiency.
+//   If rotation of 90 or 270 is used, stride is affected. The caller should
+//   allocate the I420 buffer according to rotation.
+// "dst_stride_u" number of bytes in a row of the dst_u plane.
+//   Normally this would be the same as (dst_width + 1) / 2, with
+//   recommended alignment to 16 bytes for better efficiency.
+//   If rotation of 90 or 270 is used, stride is affected.
+// "crop_x" and "crop_y" are starting position for cropping.
+//   To center, crop_x = (src_width - dst_width) / 2
+//              crop_y = (src_height - dst_height) / 2
+// "src_width" / "src_height" is size of src_frame in pixels.
+//   "src_height" can be negative indicating a vertically flipped image source.
+// "crop_width" / "crop_height" is the size to crop the src to.
+//    Must be less than or equal to src_width/src_height
+//    Cropping parameters are pre-rotation.
+// "rotation" can be 0, 90, 180 or 270.
+// "format" is a fourcc. ie 'I420', 'YUY2'
+// Returns 0 for successful; -1 for invalid parameter. Non-zero for failure.
+LIBYUV_API
+int ConvertToARGB(const uint8* src_frame, size_t src_size,
+                  uint8* dst_argb, int dst_stride_argb,
+                  int crop_x, int crop_y,
+                  int src_width, int src_height,
+                  int crop_width, int crop_height,
+                  enum RotationMode rotation,
+                  uint32 format);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_CONVERT_ARGB_H_

third_party/libyuv/x86_64/include/libyuv/convert_from.h

@@ -0,0 +1,179 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_CONVERT_FROM_H_
+#define INCLUDE_LIBYUV_CONVERT_FROM_H_
+
+#include "libyuv/basic_types.h"
+#include "libyuv/rotate.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// See Also convert.h for conversions from formats to I420.
+
+// I420Copy in convert to I420ToI420.
+
+LIBYUV_API
+int I420ToI422(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+LIBYUV_API
+int I420ToI444(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+LIBYUV_API
+int I420ToI411(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Copy to I400. Source can be I420, I422, I444, I400, NV12 or NV21.
+LIBYUV_API
+int I400Copy(const uint8* src_y, int src_stride_y,
+             uint8* dst_y, int dst_stride_y,
+             int width, int height);
+
+LIBYUV_API
+int I420ToNV12(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_uv, int dst_stride_uv,
+               int width, int height);
+
+LIBYUV_API
+int I420ToNV21(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_vu, int dst_stride_vu,
+               int width, int height);
+
+LIBYUV_API
+int I420ToYUY2(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_frame, int dst_stride_frame,
+               int width, int height);
+
+LIBYUV_API
+int I420ToUYVY(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_frame, int dst_stride_frame,
+               int width, int height);
+
+LIBYUV_API
+int I420ToARGB(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+LIBYUV_API
+int I420ToBGRA(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+LIBYUV_API
+int I420ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+LIBYUV_API
+int I420ToRGBA(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_rgba, int dst_stride_rgba,
+               int width, int height);
+
+LIBYUV_API
+int I420ToRGB24(const uint8* src_y, int src_stride_y,
+                const uint8* src_u, int src_stride_u,
+                const uint8* src_v, int src_stride_v,
+                uint8* dst_frame, int dst_stride_frame,
+                int width, int height);
+
+LIBYUV_API
+int I420ToRAW(const uint8* src_y, int src_stride_y,
+              const uint8* src_u, int src_stride_u,
+              const uint8* src_v, int src_stride_v,
+              uint8* dst_frame, int dst_stride_frame,
+              int width, int height);
+
+LIBYUV_API
+int I420ToRGB565(const uint8* src_y, int src_stride_y,
+                 const uint8* src_u, int src_stride_u,
+                 const uint8* src_v, int src_stride_v,
+                 uint8* dst_frame, int dst_stride_frame,
+                 int width, int height);
+
+// Convert I420 To RGB565 with 4x4 dither matrix (16 bytes).
+// Values in dither matrix from 0 to 7 recommended.
+// The order of the dither matrix is first byte is upper left.
+
+LIBYUV_API
+int I420ToRGB565Dither(const uint8* src_y, int src_stride_y,
+                       const uint8* src_u, int src_stride_u,
+                       const uint8* src_v, int src_stride_v,
+                       uint8* dst_frame, int dst_stride_frame,
+                       const uint8* dither4x4, int width, int height);
+
+LIBYUV_API
+int I420ToARGB1555(const uint8* src_y, int src_stride_y,
+                   const uint8* src_u, int src_stride_u,
+                   const uint8* src_v, int src_stride_v,
+                   uint8* dst_frame, int dst_stride_frame,
+                   int width, int height);
+
+LIBYUV_API
+int I420ToARGB4444(const uint8* src_y, int src_stride_y,
+                   const uint8* src_u, int src_stride_u,
+                   const uint8* src_v, int src_stride_v,
+                   uint8* dst_frame, int dst_stride_frame,
+                   int width, int height);
+
+// Convert I420 to specified format.
+// "dst_sample_stride" is bytes in a row for the destination. Pass 0 if the
+//    buffer has contiguous rows. Can be negative. A multiple of 16 is optimal.
+LIBYUV_API
+int ConvertFromI420(const uint8* y, int y_stride,
+                    const uint8* u, int u_stride,
+                    const uint8* v, int v_stride,
+                    uint8* dst_sample, int dst_sample_stride,
+                    int width, int height,
+                    uint32 format);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_CONVERT_FROM_H_

third_party/libyuv/x86_64/include/libyuv/convert_from_argb.h

@@ -0,0 +1,190 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_CONVERT_FROM_ARGB_H_
+#define INCLUDE_LIBYUV_CONVERT_FROM_ARGB_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Copy ARGB to ARGB.
+#define ARGBToARGB ARGBCopy
+LIBYUV_API
+int ARGBCopy(const uint8* src_argb, int src_stride_argb,
+             uint8* dst_argb, int dst_stride_argb,
+             int width, int height);
+
+// Convert ARGB To BGRA.
+LIBYUV_API
+int ARGBToBGRA(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_bgra, int dst_stride_bgra,
+               int width, int height);
+
+// Convert ARGB To ABGR.
+LIBYUV_API
+int ARGBToABGR(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert ARGB To RGBA.
+LIBYUV_API
+int ARGBToRGBA(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_rgba, int dst_stride_rgba,
+               int width, int height);
+
+// Convert ARGB To RGB24.
+LIBYUV_API
+int ARGBToRGB24(const uint8* src_argb, int src_stride_argb,
+                uint8* dst_rgb24, int dst_stride_rgb24,
+                int width, int height);
+
+// Convert ARGB To RAW.
+LIBYUV_API
+int ARGBToRAW(const uint8* src_argb, int src_stride_argb,
+              uint8* dst_rgb, int dst_stride_rgb,
+              int width, int height);
+
+// Convert ARGB To RGB565.
+LIBYUV_API
+int ARGBToRGB565(const uint8* src_argb, int src_stride_argb,
+                 uint8* dst_rgb565, int dst_stride_rgb565,
+                 int width, int height);
+
+// Convert ARGB To RGB565 with 4x4 dither matrix (16 bytes).
+// Values in dither matrix from 0 to 7 recommended.
+// The order of the dither matrix is first byte is upper left.
+// TODO(fbarchard): Consider pointer to 2d array for dither4x4.
+// const uint8(*dither)[4][4];
+LIBYUV_API
+int ARGBToRGB565Dither(const uint8* src_argb, int src_stride_argb,
+                       uint8* dst_rgb565, int dst_stride_rgb565,
+                       const uint8* dither4x4, int width, int height);
+
+// Convert ARGB To ARGB1555.
+LIBYUV_API
+int ARGBToARGB1555(const uint8* src_argb, int src_stride_argb,
+                   uint8* dst_argb1555, int dst_stride_argb1555,
+                   int width, int height);
+
+// Convert ARGB To ARGB4444.
+LIBYUV_API
+int ARGBToARGB4444(const uint8* src_argb, int src_stride_argb,
+                   uint8* dst_argb4444, int dst_stride_argb4444,
+                   int width, int height);
+
+// Convert ARGB To I444.
+LIBYUV_API
+int ARGBToI444(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB To I422.
+LIBYUV_API
+int ARGBToI422(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB To I420. (also in convert.h)
+LIBYUV_API
+int ARGBToI420(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB to J420. (JPeg full range I420).
+LIBYUV_API
+int ARGBToJ420(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_yj, int dst_stride_yj,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB to J422.
+LIBYUV_API
+int ARGBToJ422(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_yj, int dst_stride_yj,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB To I411.
+LIBYUV_API
+int ARGBToI411(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert ARGB to J400. (JPeg full range).
+LIBYUV_API
+int ARGBToJ400(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_yj, int dst_stride_yj,
+               int width, int height);
+
+// Convert ARGB to I400.
+LIBYUV_API
+int ARGBToI400(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+// Convert ARGB to G. (Reverse of J400toARGB, which replicates G back to ARGB)
+LIBYUV_API
+int ARGBToG(const uint8* src_argb, int src_stride_argb,
+            uint8* dst_g, int dst_stride_g,
+            int width, int height);
+
+// Convert ARGB To NV12.
+LIBYUV_API
+int ARGBToNV12(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_uv, int dst_stride_uv,
+               int width, int height);
+
+// Convert ARGB To NV21.
+LIBYUV_API
+int ARGBToNV21(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_vu, int dst_stride_vu,
+               int width, int height);
+
+// Convert ARGB To NV21.
+LIBYUV_API
+int ARGBToNV21(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_vu, int dst_stride_vu,
+               int width, int height);
+
+// Convert ARGB To YUY2.
+LIBYUV_API
+int ARGBToYUY2(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_yuy2, int dst_stride_yuy2,
+               int width, int height);
+
+// Convert ARGB To UYVY.
+LIBYUV_API
+int ARGBToUYVY(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_uyvy, int dst_stride_uyvy,
+               int width, int height);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_CONVERT_FROM_ARGB_H_

third_party/libyuv/x86_64/include/libyuv/cpu_id.h

@@ -0,0 +1,81 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_CPU_ID_H_
+#define INCLUDE_LIBYUV_CPU_ID_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Internal flag to indicate cpuid requires initialization.
+static const int kCpuInitialized = 0x1;
+
+// These flags are only valid on ARM processors.
+static const int kCpuHasARM = 0x2;
+static const int kCpuHasNEON = 0x4;
+// 0x8 reserved for future ARM flag.
+
+// These flags are only valid on x86 processors.
+static const int kCpuHasX86 = 0x10;
+static const int kCpuHasSSE2 = 0x20;
+static const int kCpuHasSSSE3 = 0x40;
+static const int kCpuHasSSE41 = 0x80;
+static const int kCpuHasSSE42 = 0x100;
+static const int kCpuHasAVX = 0x200;
+static const int kCpuHasAVX2 = 0x400;
+static const int kCpuHasERMS = 0x800;
+static const int kCpuHasFMA3 = 0x1000;
+static const int kCpuHasAVX3 = 0x2000;
+// 0x2000, 0x4000, 0x8000 reserved for future X86 flags.
+
+// These flags are only valid on MIPS processors.
+static const int kCpuHasMIPS = 0x10000;
+static const int kCpuHasDSPR2 = 0x20000;
+static const int kCpuHasMSA = 0x40000;
+
+// Internal function used to auto-init.
+LIBYUV_API
+int InitCpuFlags(void);
+
+// Internal function for parsing /proc/cpuinfo.
+LIBYUV_API
+int ArmCpuCaps(const char* cpuinfo_name);
+
+// Detect CPU has SSE2 etc.
+// Test_flag parameter should be one of kCpuHas constants above.
+// returns non-zero if instruction set is detected
+static __inline int TestCpuFlag(int test_flag) {
+  LIBYUV_API extern int cpu_info_;
+  return (!cpu_info_ ? InitCpuFlags() : cpu_info_) & test_flag;
+}
+
+// For testing, allow CPU flags to be disabled.
+// ie MaskCpuFlags(~kCpuHasSSSE3) to disable SSSE3.
+// MaskCpuFlags(-1) to enable all cpu specific optimizations.
+// MaskCpuFlags(1) to disable all cpu specific optimizations.
+LIBYUV_API
+void MaskCpuFlags(int enable_flags);
+
+// Low level cpuid for X86. Returns zeros on other CPUs.
+// eax is the info type that you want.
+// ecx is typically the cpu number, and should normally be zero.
+LIBYUV_API
+void CpuId(uint32 eax, uint32 ecx, uint32* cpu_info);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_CPU_ID_H_

third_party/libyuv/x86_64/include/libyuv/macros_msa.h

@@ -0,0 +1,76 @@
+/*
+ *  Copyright 2016 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_MACROS_MSA_H_
+#define INCLUDE_LIBYUV_MACROS_MSA_H_
+
+#if !defined(LIBYUV_DISABLE_MSA) && defined(__mips_msa)
+#include <stdint.h>
+#include <msa.h>
+
+#define LD_B(RTYPE, psrc) *((RTYPE*)(psrc))   /* NOLINT */
+#define LD_UB(...) LD_B(v16u8, __VA_ARGS__)
+
+#define ST_B(RTYPE, in, pdst) *((RTYPE*)(pdst)) = (in)  /* NOLINT */
+#define ST_UB(...) ST_B(v16u8, __VA_ARGS__)
+
+/* Description : Load two vectors with 16 'byte' sized elements
+   Arguments   : Inputs  - psrc, stride
+                 Outputs - out0, out1
+                 Return Type - as per RTYPE
+   Details     : Load 16 byte elements in 'out0' from (psrc)
+                 Load 16 byte elements in 'out1' from (psrc + stride)
+*/
+#define LD_B2(RTYPE, psrc, stride, out0, out1) {  \
+  out0 = LD_B(RTYPE, (psrc));                     \
+  out1 = LD_B(RTYPE, (psrc) + stride);            \
+}
+#define LD_UB2(...) LD_B2(v16u8, __VA_ARGS__)
+
+#define LD_B4(RTYPE, psrc, stride, out0, out1, out2, out3) {  \
+  LD_B2(RTYPE, (psrc), stride, out0, out1);                   \
+  LD_B2(RTYPE, (psrc) + 2 * stride , stride, out2, out3);     \
+}
+#define LD_UB4(...) LD_B4(v16u8, __VA_ARGS__)
+
+/* Description : Store two vectors with stride each having 16 'byte' sized
+                 elements
+   Arguments   : Inputs - in0, in1, pdst, stride
+   Details     : Store 16 byte elements from 'in0' to (pdst)
+                 Store 16 byte elements from 'in1' to (pdst + stride)
+*/
+#define ST_B2(RTYPE, in0, in1, pdst, stride) {  \
+  ST_B(RTYPE, in0, (pdst));                     \
+  ST_B(RTYPE, in1, (pdst) + stride);            \
+}
+#define ST_UB2(...) ST_B2(v16u8, __VA_ARGS__)
+#
+#define ST_B4(RTYPE, in0, in1, in2, in3, pdst, stride) {  \
+  ST_B2(RTYPE, in0, in1, (pdst), stride);                 \
+  ST_B2(RTYPE, in2, in3, (pdst) + 2 * stride, stride);    \
+}
+#define ST_UB4(...) ST_B4(v16u8, __VA_ARGS__)
+#
+/* Description : Shuffle byte vector elements as per mask vector
+   Arguments   : Inputs  - in0, in1, in2, in3, mask0, mask1
+                 Outputs - out0, out1
+                 Return Type - as per RTYPE
+   Details     : Byte elements from 'in0' & 'in1' are copied selectively to
+                 'out0' as per control vector 'mask0'
+*/
+#define VSHF_B2(RTYPE, in0, in1, in2, in3, mask0, mask1, out0, out1) {   \
+  out0 = (RTYPE) __msa_vshf_b((v16i8) mask0, (v16i8) in1, (v16i8) in0);  \
+  out1 = (RTYPE) __msa_vshf_b((v16i8) mask1, (v16i8) in3, (v16i8) in2);  \
+}
+#define VSHF_B2_UB(...) VSHF_B2(v16u8, __VA_ARGS__)
+
+#endif  /* !defined(LIBYUV_DISABLE_MSA) && defined(__mips_msa) */
+
+#endif  // INCLUDE_LIBYUV_MACROS_MSA_H_

third_party/libyuv/x86_64/include/libyuv/mjpeg_decoder.h

@@ -0,0 +1,192 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_MJPEG_DECODER_H_
+#define INCLUDE_LIBYUV_MJPEG_DECODER_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+// NOTE: For a simplified public API use convert.h MJPGToI420().
+
+struct jpeg_common_struct;
+struct jpeg_decompress_struct;
+struct jpeg_source_mgr;
+
+namespace libyuv {
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+LIBYUV_BOOL ValidateJpeg(const uint8* sample, size_t sample_size);
+
+#ifdef __cplusplus
+}  // extern "C"
+#endif
+
+static const uint32 kUnknownDataSize = 0xFFFFFFFF;
+
+enum JpegSubsamplingType {
+  kJpegYuv420,
+  kJpegYuv422,
+  kJpegYuv411,
+  kJpegYuv444,
+  kJpegYuv400,
+  kJpegUnknown
+};
+
+struct Buffer {
+  const uint8* data;
+  int len;
+};
+
+struct BufferVector {
+  Buffer* buffers;
+  int len;
+  int pos;
+};
+
+struct SetJmpErrorMgr;
+
+// MJPEG ("Motion JPEG") is a pseudo-standard video codec where the frames are
+// simply independent JPEG images with a fixed huffman table (which is omitted).
+// It is rarely used in video transmission, but is common as a camera capture
+// format, especially in Logitech devices. This class implements a decoder for
+// MJPEG frames.
+//
+// See http://tools.ietf.org/html/rfc2435
+class LIBYUV_API MJpegDecoder {
+ public:
+  typedef void (*CallbackFunction)(void* opaque,
+                                   const uint8* const* data,
+                                   const int* strides,
+                                   int rows);
+
+  static const int kColorSpaceUnknown;
+  static const int kColorSpaceGrayscale;
+  static const int kColorSpaceRgb;
+  static const int kColorSpaceYCbCr;
+  static const int kColorSpaceCMYK;
+  static const int kColorSpaceYCCK;
+
+  MJpegDecoder();
+  ~MJpegDecoder();
+
+  // Loads a new frame, reads its headers, and determines the uncompressed
+  // image format.
+  // Returns LIBYUV_TRUE if image looks valid and format is supported.
+  // If return value is LIBYUV_TRUE, then the values for all the following
+  // getters are populated.
+  // src_len is the size of the compressed mjpeg frame in bytes.
+  LIBYUV_BOOL LoadFrame(const uint8* src, size_t src_len);
+
+  // Returns width of the last loaded frame in pixels.
+  int GetWidth();
+
+  // Returns height of the last loaded frame in pixels.
+  int GetHeight();
+
+  // Returns format of the last loaded frame. The return value is one of the
+  // kColorSpace* constants.
+  int GetColorSpace();
+
+  // Number of color components in the color space.
+  int GetNumComponents();
+
+  // Sample factors of the n-th component.
+  int GetHorizSampFactor(int component);
+
+  int GetVertSampFactor(int component);
+
+  int GetHorizSubSampFactor(int component);
+
+  int GetVertSubSampFactor(int component);
+
+  // Public for testability.
+  int GetImageScanlinesPerImcuRow();
+
+  // Public for testability.
+  int GetComponentScanlinesPerImcuRow(int component);
+
+  // Width of a component in bytes.
+  int GetComponentWidth(int component);
+
+  // Height of a component.
+  int GetComponentHeight(int component);
+
+  // Width of a component in bytes with padding for DCTSIZE. Public for testing.
+  int GetComponentStride(int component);
+
+  // Size of a component in bytes.
+  int GetComponentSize(int component);
+
+  // Call this after LoadFrame() if you decide you don't want to decode it
+  // after all.
+  LIBYUV_BOOL UnloadFrame();
+
+  // Decodes the entire image into a one-buffer-per-color-component format.
+  // dst_width must match exactly. dst_height must be <= to image height; if
+  // less, the image is cropped. "planes" must have size equal to at least
+  // GetNumComponents() and they must point to non-overlapping buffers of size
+  // at least GetComponentSize(i). The pointers in planes are incremented
+  // to point to after the end of the written data.
+  // TODO(fbarchard): Add dst_x, dst_y to allow specific rect to be decoded.
+  LIBYUV_BOOL DecodeToBuffers(uint8** planes, int dst_width, int dst_height);
+
+  // Decodes the entire image and passes the data via repeated calls to a
+  // callback function. Each call will get the data for a whole number of
+  // image scanlines.
+  // TODO(fbarchard): Add dst_x, dst_y to allow specific rect to be decoded.
+  LIBYUV_BOOL DecodeToCallback(CallbackFunction fn, void* opaque,
+                        int dst_width, int dst_height);
+
+  // The helper function which recognizes the jpeg sub-sampling type.
+  static JpegSubsamplingType JpegSubsamplingTypeHelper(
+     int* subsample_x, int* subsample_y, int number_of_components);
+
+ private:
+  void AllocOutputBuffers(int num_outbufs);
+  void DestroyOutputBuffers();
+
+  LIBYUV_BOOL StartDecode();
+  LIBYUV_BOOL FinishDecode();
+
+  void SetScanlinePointers(uint8** data);
+  LIBYUV_BOOL DecodeImcuRow();
+
+  int GetComponentScanlinePadding(int component);
+
+  // A buffer holding the input data for a frame.
+  Buffer buf_;
+  BufferVector buf_vec_;
+
+  jpeg_decompress_struct* decompress_struct_;
+  jpeg_source_mgr* source_mgr_;
+  SetJmpErrorMgr* error_mgr_;
+
+  // LIBYUV_TRUE iff at least one component has scanline padding. (i.e.,
+  // GetComponentScanlinePadding() != 0.)
+  LIBYUV_BOOL has_scanline_padding_;
+
+  // Temporaries used to point to scanline outputs.
+  int num_outbufs_;  // Outermost size of all arrays below.
+  uint8*** scanlines_;
+  int* scanlines_sizes_;
+  // Temporary buffer used for decoding when we can't decode directly to the
+  // output buffers. Large enough for just one iMCU row.
+  uint8** databuf_;
+  int* databuf_strides_;
+};
+
+}  // namespace libyuv
+
+#endif  //  __cplusplus
+#endif  // INCLUDE_LIBYUV_MJPEG_DECODER_H_

third_party/libyuv/x86_64/include/libyuv/planar_functions.h

@@ -0,0 +1,529 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_PLANAR_FUNCTIONS_H_
+#define INCLUDE_LIBYUV_PLANAR_FUNCTIONS_H_
+
+#include "libyuv/basic_types.h"
+
+// TODO(fbarchard): Remove the following headers includes.
+#include "libyuv/convert.h"
+#include "libyuv/convert_argb.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Copy a plane of data.
+LIBYUV_API
+void CopyPlane(const uint8* src_y, int src_stride_y,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+LIBYUV_API
+void CopyPlane_16(const uint16* src_y, int src_stride_y,
+                  uint16* dst_y, int dst_stride_y,
+                  int width, int height);
+
+// Set a plane of data to a 32 bit value.
+LIBYUV_API
+void SetPlane(uint8* dst_y, int dst_stride_y,
+              int width, int height,
+              uint32 value);
+
+// Split interleaved UV plane into separate U and V planes.
+LIBYUV_API
+void SplitUVPlane(const uint8* src_uv, int src_stride_uv,
+                  uint8* dst_u, int dst_stride_u,
+                  uint8* dst_v, int dst_stride_v,
+                  int width, int height);
+
+// Merge separate U and V planes into one interleaved UV plane.
+LIBYUV_API
+void MergeUVPlane(const uint8* src_u, int src_stride_u,
+                  const uint8* src_v, int src_stride_v,
+                  uint8* dst_uv, int dst_stride_uv,
+                  int width, int height);
+
+// Copy I400.  Supports inverting.
+LIBYUV_API
+int I400ToI400(const uint8* src_y, int src_stride_y,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+#define J400ToJ400 I400ToI400
+
+// Copy I422 to I422.
+#define I422ToI422 I422Copy
+LIBYUV_API
+int I422Copy(const uint8* src_y, int src_stride_y,
+             const uint8* src_u, int src_stride_u,
+             const uint8* src_v, int src_stride_v,
+             uint8* dst_y, int dst_stride_y,
+             uint8* dst_u, int dst_stride_u,
+             uint8* dst_v, int dst_stride_v,
+             int width, int height);
+
+// Copy I444 to I444.
+#define I444ToI444 I444Copy
+LIBYUV_API
+int I444Copy(const uint8* src_y, int src_stride_y,
+             const uint8* src_u, int src_stride_u,
+             const uint8* src_v, int src_stride_v,
+             uint8* dst_y, int dst_stride_y,
+             uint8* dst_u, int dst_stride_u,
+             uint8* dst_v, int dst_stride_v,
+             int width, int height);
+
+// Convert YUY2 to I422.
+LIBYUV_API
+int YUY2ToI422(const uint8* src_yuy2, int src_stride_yuy2,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Convert UYVY to I422.
+LIBYUV_API
+int UYVYToI422(const uint8* src_uyvy, int src_stride_uyvy,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+LIBYUV_API
+int YUY2ToNV12(const uint8* src_yuy2, int src_stride_yuy2,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_uv, int dst_stride_uv,
+               int width, int height);
+
+LIBYUV_API
+int UYVYToNV12(const uint8* src_uyvy, int src_stride_uyvy,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_uv, int dst_stride_uv,
+               int width, int height);
+
+// Convert I420 to I400. (calls CopyPlane ignoring u/v).
+LIBYUV_API
+int I420ToI400(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+// Alias
+#define J420ToJ400 I420ToI400
+#define I420ToI420Mirror I420Mirror
+
+// I420 mirror.
+LIBYUV_API
+int I420Mirror(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int width, int height);
+
+// Alias
+#define I400ToI400Mirror I400Mirror
+
+// I400 mirror.  A single plane is mirrored horizontally.
+// Pass negative height to achieve 180 degree rotation.
+LIBYUV_API
+int I400Mirror(const uint8* src_y, int src_stride_y,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+// Alias
+#define ARGBToARGBMirror ARGBMirror
+
+// ARGB mirror.
+LIBYUV_API
+int ARGBMirror(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Convert NV12 to RGB565.
+LIBYUV_API
+int NV12ToRGB565(const uint8* src_y, int src_stride_y,
+                 const uint8* src_uv, int src_stride_uv,
+                 uint8* dst_rgb565, int dst_stride_rgb565,
+                 int width, int height);
+
+// I422ToARGB is in convert_argb.h
+// Convert I422 to BGRA.
+LIBYUV_API
+int I422ToBGRA(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_bgra, int dst_stride_bgra,
+               int width, int height);
+
+// Convert I422 to ABGR.
+LIBYUV_API
+int I422ToABGR(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_abgr, int dst_stride_abgr,
+               int width, int height);
+
+// Convert I422 to RGBA.
+LIBYUV_API
+int I422ToRGBA(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_rgba, int dst_stride_rgba,
+               int width, int height);
+
+// Alias
+#define RGB24ToRAW RAWToRGB24
+
+LIBYUV_API
+int RAWToRGB24(const uint8* src_raw, int src_stride_raw,
+               uint8* dst_rgb24, int dst_stride_rgb24,
+               int width, int height);
+
+// Draw a rectangle into I420.
+LIBYUV_API
+int I420Rect(uint8* dst_y, int dst_stride_y,
+             uint8* dst_u, int dst_stride_u,
+             uint8* dst_v, int dst_stride_v,
+             int x, int y, int width, int height,
+             int value_y, int value_u, int value_v);
+
+// Draw a rectangle into ARGB.
+LIBYUV_API
+int ARGBRect(uint8* dst_argb, int dst_stride_argb,
+             int x, int y, int width, int height, uint32 value);
+
+// Convert ARGB to gray scale ARGB.
+LIBYUV_API
+int ARGBGrayTo(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_argb, int dst_stride_argb,
+               int width, int height);
+
+// Make a rectangle of ARGB gray scale.
+LIBYUV_API
+int ARGBGray(uint8* dst_argb, int dst_stride_argb,
+             int x, int y, int width, int height);
+
+// Make a rectangle of ARGB Sepia tone.
+LIBYUV_API
+int ARGBSepia(uint8* dst_argb, int dst_stride_argb,
+              int x, int y, int width, int height);
+
+// Apply a matrix rotation to each ARGB pixel.
+// matrix_argb is 4 signed ARGB values. -128 to 127 representing -2 to 2.
+// The first 4 coefficients apply to B, G, R, A and produce B of the output.
+// The next 4 coefficients apply to B, G, R, A and produce G of the output.
+// The next 4 coefficients apply to B, G, R, A and produce R of the output.
+// The last 4 coefficients apply to B, G, R, A and produce A of the output.
+LIBYUV_API
+int ARGBColorMatrix(const uint8* src_argb, int src_stride_argb,
+                    uint8* dst_argb, int dst_stride_argb,
+                    const int8* matrix_argb,
+                    int width, int height);
+
+// Deprecated. Use ARGBColorMatrix instead.
+// Apply a matrix rotation to each ARGB pixel.
+// matrix_argb is 3 signed ARGB values. -128 to 127 representing -1 to 1.
+// The first 4 coefficients apply to B, G, R, A and produce B of the output.
+// The next 4 coefficients apply to B, G, R, A and produce G of the output.
+// The last 4 coefficients apply to B, G, R, A and produce R of the output.
+LIBYUV_API
+int RGBColorMatrix(uint8* dst_argb, int dst_stride_argb,
+                   const int8* matrix_rgb,
+                   int x, int y, int width, int height);
+
+// Apply a color table each ARGB pixel.
+// Table contains 256 ARGB values.
+LIBYUV_API
+int ARGBColorTable(uint8* dst_argb, int dst_stride_argb,
+                   const uint8* table_argb,
+                   int x, int y, int width, int height);
+
+// Apply a color table each ARGB pixel but preserve destination alpha.
+// Table contains 256 ARGB values.
+LIBYUV_API
+int RGBColorTable(uint8* dst_argb, int dst_stride_argb,
+                  const uint8* table_argb,
+                  int x, int y, int width, int height);
+
+// Apply a luma/color table each ARGB pixel but preserve destination alpha.
+// Table contains 32768 values indexed by [Y][C] where 7 it 7 bit luma from
+// RGB (YJ style) and C is an 8 bit color component (R, G or B).
+LIBYUV_API
+int ARGBLumaColorTable(const uint8* src_argb, int src_stride_argb,
+                       uint8* dst_argb, int dst_stride_argb,
+                       const uint8* luma_rgb_table,
+                       int width, int height);
+
+// Apply a 3 term polynomial to ARGB values.
+// poly points to a 4x4 matrix.  The first row is constants.  The 2nd row is
+// coefficients for b, g, r and a.  The 3rd row is coefficients for b squared,
+// g squared, r squared and a squared.  The 4rd row is coefficients for b to
+// the 3, g to the 3, r to the 3 and a to the 3.  The values are summed and
+// result clamped to 0 to 255.
+// A polynomial approximation can be dirived using software such as 'R'.
+
+LIBYUV_API
+int ARGBPolynomial(const uint8* src_argb, int src_stride_argb,
+                   uint8* dst_argb, int dst_stride_argb,
+                   const float* poly,
+                   int width, int height);
+
+// Convert plane of 16 bit shorts to half floats.
+// Source values are multiplied by scale before storing as half float.
+LIBYUV_API
+int HalfFloatPlane(const uint16* src_y, int src_stride_y,
+                   uint16* dst_y, int dst_stride_y,
+                   float scale,
+                   int width, int height);
+
+// Quantize a rectangle of ARGB. Alpha unaffected.
+// scale is a 16 bit fractional fixed point scaler between 0 and 65535.
+// interval_size should be a value between 1 and 255.
+// interval_offset should be a value between 0 and 255.
+LIBYUV_API
+int ARGBQuantize(uint8* dst_argb, int dst_stride_argb,
+                 int scale, int interval_size, int interval_offset,
+                 int x, int y, int width, int height);
+
+// Copy ARGB to ARGB.
+LIBYUV_API
+int ARGBCopy(const uint8* src_argb, int src_stride_argb,
+             uint8* dst_argb, int dst_stride_argb,
+             int width, int height);
+
+// Copy Alpha channel of ARGB to alpha of ARGB.
+LIBYUV_API
+int ARGBCopyAlpha(const uint8* src_argb, int src_stride_argb,
+                  uint8* dst_argb, int dst_stride_argb,
+                  int width, int height);
+
+// Extract the alpha channel from ARGB.
+LIBYUV_API
+int ARGBExtractAlpha(const uint8* src_argb, int src_stride_argb,
+                     uint8* dst_a, int dst_stride_a,
+                     int width, int height);
+
+// Copy Y channel to Alpha of ARGB.
+LIBYUV_API
+int ARGBCopyYToAlpha(const uint8* src_y, int src_stride_y,
+                     uint8* dst_argb, int dst_stride_argb,
+                     int width, int height);
+
+typedef void (*ARGBBlendRow)(const uint8* src_argb0, const uint8* src_argb1,
+                             uint8* dst_argb, int width);
+
+// Get function to Alpha Blend ARGB pixels and store to destination.
+LIBYUV_API
+ARGBBlendRow GetARGBBlend();
+
+// Alpha Blend ARGB images and store to destination.
+// Source is pre-multiplied by alpha using ARGBAttenuate.
+// Alpha of destination is set to 255.
+LIBYUV_API
+int ARGBBlend(const uint8* src_argb0, int src_stride_argb0,
+              const uint8* src_argb1, int src_stride_argb1,
+              uint8* dst_argb, int dst_stride_argb,
+              int width, int height);
+
+// Alpha Blend plane and store to destination.
+// Source is not pre-multiplied by alpha.
+LIBYUV_API
+int BlendPlane(const uint8* src_y0, int src_stride_y0,
+               const uint8* src_y1, int src_stride_y1,
+               const uint8* alpha, int alpha_stride,
+               uint8* dst_y, int dst_stride_y,
+               int width, int height);
+
+// Alpha Blend YUV images and store to destination.
+// Source is not pre-multiplied by alpha.
+// Alpha is full width x height and subsampled to half size to apply to UV.
+LIBYUV_API
+int I420Blend(const uint8* src_y0, int src_stride_y0,
+              const uint8* src_u0, int src_stride_u0,
+              const uint8* src_v0, int src_stride_v0,
+              const uint8* src_y1, int src_stride_y1,
+              const uint8* src_u1, int src_stride_u1,
+              const uint8* src_v1, int src_stride_v1,
+              const uint8* alpha, int alpha_stride,
+              uint8* dst_y, int dst_stride_y,
+              uint8* dst_u, int dst_stride_u,
+              uint8* dst_v, int dst_stride_v,
+              int width, int height);
+
+// Multiply ARGB image by ARGB image. Shifted down by 8. Saturates to 255.
+LIBYUV_API
+int ARGBMultiply(const uint8* src_argb0, int src_stride_argb0,
+                 const uint8* src_argb1, int src_stride_argb1,
+                 uint8* dst_argb, int dst_stride_argb,
+                 int width, int height);
+
+// Add ARGB image with ARGB image. Saturates to 255.
+LIBYUV_API
+int ARGBAdd(const uint8* src_argb0, int src_stride_argb0,
+            const uint8* src_argb1, int src_stride_argb1,
+            uint8* dst_argb, int dst_stride_argb,
+            int width, int height);
+
+// Subtract ARGB image (argb1) from ARGB image (argb0). Saturates to 0.
+LIBYUV_API
+int ARGBSubtract(const uint8* src_argb0, int src_stride_argb0,
+                 const uint8* src_argb1, int src_stride_argb1,
+                 uint8* dst_argb, int dst_stride_argb,
+                 int width, int height);
+
+// Convert I422 to YUY2.
+LIBYUV_API
+int I422ToYUY2(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_frame, int dst_stride_frame,
+               int width, int height);
+
+// Convert I422 to UYVY.
+LIBYUV_API
+int I422ToUYVY(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_frame, int dst_stride_frame,
+               int width, int height);
+
+// Convert unattentuated ARGB to preattenuated ARGB.
+LIBYUV_API
+int ARGBAttenuate(const uint8* src_argb, int src_stride_argb,
+                  uint8* dst_argb, int dst_stride_argb,
+                  int width, int height);
+
+// Convert preattentuated ARGB to unattenuated ARGB.
+LIBYUV_API
+int ARGBUnattenuate(const uint8* src_argb, int src_stride_argb,
+                    uint8* dst_argb, int dst_stride_argb,
+                    int width, int height);
+
+// Internal function - do not call directly.
+// Computes table of cumulative sum for image where the value is the sum
+// of all values above and to the left of the entry. Used by ARGBBlur.
+LIBYUV_API
+int ARGBComputeCumulativeSum(const uint8* src_argb, int src_stride_argb,
+                             int32* dst_cumsum, int dst_stride32_cumsum,
+                             int width, int height);
+
+// Blur ARGB image.
+// dst_cumsum table of width * (height + 1) * 16 bytes aligned to
+//   16 byte boundary.
+// dst_stride32_cumsum is number of ints in a row (width * 4).
+// radius is number of pixels around the center.  e.g. 1 = 3x3. 2=5x5.
+// Blur is optimized for radius of 5 (11x11) or less.
+LIBYUV_API
+int ARGBBlur(const uint8* src_argb, int src_stride_argb,
+             uint8* dst_argb, int dst_stride_argb,
+             int32* dst_cumsum, int dst_stride32_cumsum,
+             int width, int height, int radius);
+
+// Multiply ARGB image by ARGB value.
+LIBYUV_API
+int ARGBShade(const uint8* src_argb, int src_stride_argb,
+              uint8* dst_argb, int dst_stride_argb,
+              int width, int height, uint32 value);
+
+// Interpolate between two images using specified amount of interpolation
+// (0 to 255) and store to destination.
+// 'interpolation' is specified as 8 bit fraction where 0 means 100% src0
+// and 255 means 1% src0 and 99% src1.
+LIBYUV_API
+int InterpolatePlane(const uint8* src0, int src_stride0,
+                     const uint8* src1, int src_stride1,
+                     uint8* dst, int dst_stride,
+                     int width, int height, int interpolation);
+
+// Interpolate between two ARGB images using specified amount of interpolation
+// Internally calls InterpolatePlane with width * 4 (bpp).
+LIBYUV_API
+int ARGBInterpolate(const uint8* src_argb0, int src_stride_argb0,
+                    const uint8* src_argb1, int src_stride_argb1,
+                    uint8* dst_argb, int dst_stride_argb,
+                    int width, int height, int interpolation);
+
+// Interpolate between two YUV images using specified amount of interpolation
+// Internally calls InterpolatePlane on each plane where the U and V planes
+// are half width and half height.
+LIBYUV_API
+int I420Interpolate(const uint8* src0_y, int src0_stride_y,
+                    const uint8* src0_u, int src0_stride_u,
+                    const uint8* src0_v, int src0_stride_v,
+                    const uint8* src1_y, int src1_stride_y,
+                    const uint8* src1_u, int src1_stride_u,
+                    const uint8* src1_v, int src1_stride_v,
+                    uint8* dst_y, int dst_stride_y,
+                    uint8* dst_u, int dst_stride_u,
+                    uint8* dst_v, int dst_stride_v,
+                    int width, int height, int interpolation);
+
+#if defined(__pnacl__) || defined(__CLR_VER) || \
+    (defined(__i386__) && !defined(__SSE2__))
+#define LIBYUV_DISABLE_X86
+#endif
+// MemorySanitizer does not support assembly code yet. http://crbug.com/344505
+#if defined(__has_feature)
+#if __has_feature(memory_sanitizer)
+#define LIBYUV_DISABLE_X86
+#endif
+#endif
+// The following are available on all x86 platforms:
+#if !defined(LIBYUV_DISABLE_X86) && \
+    (defined(_M_IX86) || defined(__x86_64__) || defined(__i386__))
+#define HAS_ARGBAFFINEROW_SSE2
+#endif
+
+// Row function for copying pixels from a source with a slope to a row
+// of destination. Useful for scaling, rotation, mirror, texture mapping.
+LIBYUV_API
+void ARGBAffineRow_C(const uint8* src_argb, int src_argb_stride,
+                     uint8* dst_argb, const float* uv_dudv, int width);
+LIBYUV_API
+void ARGBAffineRow_SSE2(const uint8* src_argb, int src_argb_stride,
+                        uint8* dst_argb, const float* uv_dudv, int width);
+
+// Shuffle ARGB channel order.  e.g. BGRA to ARGB.
+// shuffler is 16 bytes and must be aligned.
+LIBYUV_API
+int ARGBShuffle(const uint8* src_bgra, int src_stride_bgra,
+                uint8* dst_argb, int dst_stride_argb,
+                const uint8* shuffler, int width, int height);
+
+// Sobel ARGB effect with planar output.
+LIBYUV_API
+int ARGBSobelToPlane(const uint8* src_argb, int src_stride_argb,
+                     uint8* dst_y, int dst_stride_y,
+                     int width, int height);
+
+// Sobel ARGB effect.
+LIBYUV_API
+int ARGBSobel(const uint8* src_argb, int src_stride_argb,
+              uint8* dst_argb, int dst_stride_argb,
+              int width, int height);
+
+// Sobel ARGB effect w/ Sobel X, Sobel, Sobel Y in ARGB.
+LIBYUV_API
+int ARGBSobelXY(const uint8* src_argb, int src_stride_argb,
+                uint8* dst_argb, int dst_stride_argb,
+                int width, int height);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_PLANAR_FUNCTIONS_H_

third_party/libyuv/x86_64/include/libyuv/rotate.h

@@ -0,0 +1,117 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_ROTATE_H_
+#define INCLUDE_LIBYUV_ROTATE_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Supported rotation.
+typedef enum RotationMode {
+  kRotate0 = 0,  // No rotation.
+  kRotate90 = 90,  // Rotate 90 degrees clockwise.
+  kRotate180 = 180,  // Rotate 180 degrees.
+  kRotate270 = 270,  // Rotate 270 degrees clockwise.
+
+  // Deprecated.
+  kRotateNone = 0,
+  kRotateClockwise = 90,
+  kRotateCounterClockwise = 270,
+} RotationModeEnum;
+
+// Rotate I420 frame.
+LIBYUV_API
+int I420Rotate(const uint8* src_y, int src_stride_y,
+               const uint8* src_u, int src_stride_u,
+               const uint8* src_v, int src_stride_v,
+               uint8* dst_y, int dst_stride_y,
+               uint8* dst_u, int dst_stride_u,
+               uint8* dst_v, int dst_stride_v,
+               int src_width, int src_height, enum RotationMode mode);
+
+// Rotate NV12 input and store in I420.
+LIBYUV_API
+int NV12ToI420Rotate(const uint8* src_y, int src_stride_y,
+                     const uint8* src_uv, int src_stride_uv,
+                     uint8* dst_y, int dst_stride_y,
+                     uint8* dst_u, int dst_stride_u,
+                     uint8* dst_v, int dst_stride_v,
+                     int src_width, int src_height, enum RotationMode mode);
+
+// Rotate a plane by 0, 90, 180, or 270.
+LIBYUV_API
+int RotatePlane(const uint8* src, int src_stride,
+                uint8* dst, int dst_stride,
+                int src_width, int src_height, enum RotationMode mode);
+
+// Rotate planes by 90, 180, 270. Deprecated.
+LIBYUV_API
+void RotatePlane90(const uint8* src, int src_stride,
+                   uint8* dst, int dst_stride,
+                   int width, int height);
+
+LIBYUV_API
+void RotatePlane180(const uint8* src, int src_stride,
+                    uint8* dst, int dst_stride,
+                    int width, int height);
+
+LIBYUV_API
+void RotatePlane270(const uint8* src, int src_stride,
+                    uint8* dst, int dst_stride,
+                    int width, int height);
+
+LIBYUV_API
+void RotateUV90(const uint8* src, int src_stride,
+                uint8* dst_a, int dst_stride_a,
+                uint8* dst_b, int dst_stride_b,
+                int width, int height);
+
+// Rotations for when U and V are interleaved.
+// These functions take one input pointer and
+// split the data into two buffers while
+// rotating them. Deprecated.
+LIBYUV_API
+void RotateUV180(const uint8* src, int src_stride,
+                 uint8* dst_a, int dst_stride_a,
+                 uint8* dst_b, int dst_stride_b,
+                 int width, int height);
+
+LIBYUV_API
+void RotateUV270(const uint8* src, int src_stride,
+                 uint8* dst_a, int dst_stride_a,
+                 uint8* dst_b, int dst_stride_b,
+                 int width, int height);
+
+// The 90 and 270 functions are based on transposes.
+// Doing a transpose with reversing the read/write
+// order will result in a rotation by +- 90 degrees.
+// Deprecated.
+LIBYUV_API
+void TransposePlane(const uint8* src, int src_stride,
+                    uint8* dst, int dst_stride,
+                    int width, int height);
+
+LIBYUV_API
+void TransposeUV(const uint8* src, int src_stride,
+                 uint8* dst_a, int dst_stride_a,
+                 uint8* dst_b, int dst_stride_b,
+                 int width, int height);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_ROTATE_H_

third_party/libyuv/x86_64/include/libyuv/rotate_argb.h

@@ -0,0 +1,33 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_ROTATE_ARGB_H_
+#define INCLUDE_LIBYUV_ROTATE_ARGB_H_
+
+#include "libyuv/basic_types.h"
+#include "libyuv/rotate.h"  // For RotationMode.
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Rotate ARGB frame
+LIBYUV_API
+int ARGBRotate(const uint8* src_argb, int src_stride_argb,
+               uint8* dst_argb, int dst_stride_argb,
+               int src_width, int src_height, enum RotationMode mode);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_ROTATE_ARGB_H_

third_party/libyuv/x86_64/include/libyuv/rotate_row.h

@@ -0,0 +1,121 @@
+/*
+ *  Copyright 2013 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_ROTATE_ROW_H_
+#define INCLUDE_LIBYUV_ROTATE_ROW_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+#if defined(__pnacl__) || defined(__CLR_VER) || \
+    (defined(__i386__) && !defined(__SSE2__))
+#define LIBYUV_DISABLE_X86
+#endif
+// MemorySanitizer does not support assembly code yet. http://crbug.com/344505
+#if defined(__has_feature)
+#if __has_feature(memory_sanitizer)
+#define LIBYUV_DISABLE_X86
+#endif
+#endif
+// The following are available for Visual C and clangcl 32 bit:
+#if !defined(LIBYUV_DISABLE_X86) && defined(_M_IX86)
+#define HAS_TRANSPOSEWX8_SSSE3
+#define HAS_TRANSPOSEUVWX8_SSE2
+#endif
+
+// The following are available for GCC 32 or 64 bit but not NaCL for 64 bit:
+#if !defined(LIBYUV_DISABLE_X86) && \
+    (defined(__i386__) || (defined(__x86_64__) && !defined(__native_client__)))
+#define HAS_TRANSPOSEWX8_SSSE3
+#endif
+
+// The following are available for 64 bit GCC but not NaCL:
+#if !defined(LIBYUV_DISABLE_X86) && !defined(__native_client__) && \
+    defined(__x86_64__)
+#define HAS_TRANSPOSEWX8_FAST_SSSE3
+#define HAS_TRANSPOSEUVWX8_SSE2
+#endif
+
+#if !defined(LIBYUV_DISABLE_NEON) && !defined(__native_client__) && \
+    (defined(__ARM_NEON__) || defined(LIBYUV_NEON) || defined(__aarch64__))
+#define HAS_TRANSPOSEWX8_NEON
+#define HAS_TRANSPOSEUVWX8_NEON
+#endif
+
+#if !defined(LIBYUV_DISABLE_MIPS) && !defined(__native_client__) && \
+    defined(__mips__) && \
+    defined(__mips_dsp) && (__mips_dsp_rev >= 2)
+#define HAS_TRANSPOSEWX8_DSPR2
+#define HAS_TRANSPOSEUVWX8_DSPR2
+#endif  // defined(__mips__)
+
+void TransposeWxH_C(const uint8* src, int src_stride,
+                    uint8* dst, int dst_stride, int width, int height);
+
+void TransposeWx8_C(const uint8* src, int src_stride,
+                    uint8* dst, int dst_stride, int width);
+void TransposeWx8_NEON(const uint8* src, int src_stride,
+                       uint8* dst, int dst_stride, int width);
+void TransposeWx8_SSSE3(const uint8* src, int src_stride,
+                        uint8* dst, int dst_stride, int width);
+void TransposeWx8_Fast_SSSE3(const uint8* src, int src_stride,
+                             uint8* dst, int dst_stride, int width);
+void TransposeWx8_DSPR2(const uint8* src, int src_stride,
+                        uint8* dst, int dst_stride, int width);
+void TransposeWx8_Fast_DSPR2(const uint8* src, int src_stride,
+                             uint8* dst, int dst_stride, int width);
+
+void TransposeWx8_Any_NEON(const uint8* src, int src_stride,
+                           uint8* dst, int dst_stride, int width);
+void TransposeWx8_Any_SSSE3(const uint8* src, int src_stride,
+                            uint8* dst, int dst_stride, int width);
+void TransposeWx8_Fast_Any_SSSE3(const uint8* src, int src_stride,
+                                 uint8* dst, int dst_stride, int width);
+void TransposeWx8_Any_DSPR2(const uint8* src, int src_stride,
+                            uint8* dst, int dst_stride, int width);
+
+void TransposeUVWxH_C(const uint8* src, int src_stride,
+                      uint8* dst_a, int dst_stride_a,
+                      uint8* dst_b, int dst_stride_b,
+                      int width, int height);
+
+void TransposeUVWx8_C(const uint8* src, int src_stride,
+                      uint8* dst_a, int dst_stride_a,
+                      uint8* dst_b, int dst_stride_b, int width);
+void TransposeUVWx8_SSE2(const uint8* src, int src_stride,
+                         uint8* dst_a, int dst_stride_a,
+                         uint8* dst_b, int dst_stride_b, int width);
+void TransposeUVWx8_NEON(const uint8* src, int src_stride,
+                         uint8* dst_a, int dst_stride_a,
+                         uint8* dst_b, int dst_stride_b, int width);
+void TransposeUVWx8_DSPR2(const uint8* src, int src_stride,
+                          uint8* dst_a, int dst_stride_a,
+                          uint8* dst_b, int dst_stride_b, int width);
+
+void TransposeUVWx8_Any_SSE2(const uint8* src, int src_stride,
+                             uint8* dst_a, int dst_stride_a,
+                             uint8* dst_b, int dst_stride_b, int width);
+void TransposeUVWx8_Any_NEON(const uint8* src, int src_stride,
+                             uint8* dst_a, int dst_stride_a,
+                             uint8* dst_b, int dst_stride_b, int width);
+void TransposeUVWx8_Any_DSPR2(const uint8* src, int src_stride,
+                              uint8* dst_a, int dst_stride_a,
+                              uint8* dst_b, int dst_stride_b, int width);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_ROTATE_ROW_H_

third_party/libyuv/x86_64/include/libyuv/scale.h

@@ -0,0 +1,103 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_SCALE_H_
+#define INCLUDE_LIBYUV_SCALE_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+// Supported filtering.
+typedef enum FilterMode {
+  kFilterNone = 0,  // Point sample; Fastest.
+  kFilterLinear = 1,  // Filter horizontally only.
+  kFilterBilinear = 2,  // Faster than box, but lower quality scaling down.
+  kFilterBox = 3  // Highest quality.
+} FilterModeEnum;
+
+// Scale a YUV plane.
+LIBYUV_API
+void ScalePlane(const uint8* src, int src_stride,
+                int src_width, int src_height,
+                uint8* dst, int dst_stride,
+                int dst_width, int dst_height,
+                enum FilterMode filtering);
+
+LIBYUV_API
+void ScalePlane_16(const uint16* src, int src_stride,
+                   int src_width, int src_height,
+                   uint16* dst, int dst_stride,
+                   int dst_width, int dst_height,
+                   enum FilterMode filtering);
+
+// Scales a YUV 4:2:0 image from the src width and height to the
+// dst width and height.
+// If filtering is kFilterNone, a simple nearest-neighbor algorithm is
+// used. This produces basic (blocky) quality at the fastest speed.
+// If filtering is kFilterBilinear, interpolation is used to produce a better
+// quality image, at the expense of speed.
+// If filtering is kFilterBox, averaging is used to produce ever better
+// quality image, at further expense of speed.
+// Returns 0 if successful.
+
+LIBYUV_API
+int I420Scale(const uint8* src_y, int src_stride_y,
+              const uint8* src_u, int src_stride_u,
+              const uint8* src_v, int src_stride_v,
+              int src_width, int src_height,
+              uint8* dst_y, int dst_stride_y,
+              uint8* dst_u, int dst_stride_u,
+              uint8* dst_v, int dst_stride_v,
+              int dst_width, int dst_height,
+              enum FilterMode filtering);
+
+LIBYUV_API
+int I420Scale_16(const uint16* src_y, int src_stride_y,
+                 const uint16* src_u, int src_stride_u,
+                 const uint16* src_v, int src_stride_v,
+                 int src_width, int src_height,
+                 uint16* dst_y, int dst_stride_y,
+                 uint16* dst_u, int dst_stride_u,
+                 uint16* dst_v, int dst_stride_v,
+                 int dst_width, int dst_height,
+                 enum FilterMode filtering);
+
+#ifdef __cplusplus
+// Legacy API.  Deprecated.
+LIBYUV_API
+int Scale(const uint8* src_y, const uint8* src_u, const uint8* src_v,
+          int src_stride_y, int src_stride_u, int src_stride_v,
+          int src_width, int src_height,
+          uint8* dst_y, uint8* dst_u, uint8* dst_v,
+          int dst_stride_y, int dst_stride_u, int dst_stride_v,
+          int dst_width, int dst_height,
+          LIBYUV_BOOL interpolate);
+
+// Legacy API.  Deprecated.
+LIBYUV_API
+int ScaleOffset(const uint8* src_i420, int src_width, int src_height,
+                uint8* dst_i420, int dst_width, int dst_height, int dst_yoffset,
+                LIBYUV_BOOL interpolate);
+
+// For testing, allow disabling of specialized scalers.
+LIBYUV_API
+void SetUseReferenceImpl(LIBYUV_BOOL use);
+#endif  // __cplusplus
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_SCALE_H_

third_party/libyuv/x86_64/include/libyuv/scale_argb.h

@@ -0,0 +1,56 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_SCALE_ARGB_H_
+#define INCLUDE_LIBYUV_SCALE_ARGB_H_
+
+#include "libyuv/basic_types.h"
+#include "libyuv/scale.h"  // For FilterMode
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+LIBYUV_API
+int ARGBScale(const uint8* src_argb, int src_stride_argb,
+              int src_width, int src_height,
+              uint8* dst_argb, int dst_stride_argb,
+              int dst_width, int dst_height,
+              enum FilterMode filtering);
+
+// Clipped scale takes destination rectangle coordinates for clip values.
+LIBYUV_API
+int ARGBScaleClip(const uint8* src_argb, int src_stride_argb,
+                  int src_width, int src_height,
+                  uint8* dst_argb, int dst_stride_argb,
+                  int dst_width, int dst_height,
+                  int clip_x, int clip_y, int clip_width, int clip_height,
+                  enum FilterMode filtering);
+
+// Scale with YUV conversion to ARGB and clipping.
+LIBYUV_API
+int YUVToARGBScaleClip(const uint8* src_y, int src_stride_y,
+                       const uint8* src_u, int src_stride_u,
+                       const uint8* src_v, int src_stride_v,
+                       uint32 src_fourcc,
+                       int src_width, int src_height,
+                       uint8* dst_argb, int dst_stride_argb,
+                       uint32 dst_fourcc,
+                       int dst_width, int dst_height,
+                       int clip_x, int clip_y, int clip_width, int clip_height,
+                       enum FilterMode filtering);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_SCALE_ARGB_H_

third_party/libyuv/x86_64/include/libyuv/scale_row.h

@@ -0,0 +1,503 @@
+/*
+ *  Copyright 2013 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_SCALE_ROW_H_
+#define INCLUDE_LIBYUV_SCALE_ROW_H_
+
+#include "libyuv/basic_types.h"
+#include "libyuv/scale.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+#if defined(__pnacl__) || defined(__CLR_VER) || \
+    (defined(__i386__) && !defined(__SSE2__))
+#define LIBYUV_DISABLE_X86
+#endif
+// MemorySanitizer does not support assembly code yet. http://crbug.com/344505
+#if defined(__has_feature)
+#if __has_feature(memory_sanitizer)
+#define LIBYUV_DISABLE_X86
+#endif
+#endif
+
+// GCC >= 4.7.0 required for AVX2.
+#if defined(__GNUC__) && (defined(__x86_64__) || defined(__i386__))
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && (__GNUC_MINOR__ >= 7))
+#define GCC_HAS_AVX2 1
+#endif  // GNUC >= 4.7
+#endif  // __GNUC__
+
+// clang >= 3.4.0 required for AVX2.
+#if defined(__clang__) && (defined(__x86_64__) || defined(__i386__))
+#if (__clang_major__ > 3) || (__clang_major__ == 3 && (__clang_minor__ >= 4))
+#define CLANG_HAS_AVX2 1
+#endif  // clang >= 3.4
+#endif  // __clang__
+
+// Visual C 2012 required for AVX2.
+#if defined(_M_IX86) && !defined(__clang__) && \
+    defined(_MSC_VER) && _MSC_VER >= 1700
+#define VISUALC_HAS_AVX2 1
+#endif  // VisualStudio >= 2012
+
+// The following are available on all x86 platforms:
+#if !defined(LIBYUV_DISABLE_X86) && \
+    (defined(_M_IX86) || defined(__x86_64__) || defined(__i386__))
+#define HAS_FIXEDDIV1_X86
+#define HAS_FIXEDDIV_X86
+#define HAS_SCALEARGBCOLS_SSE2
+#define HAS_SCALEARGBCOLSUP2_SSE2
+#define HAS_SCALEARGBFILTERCOLS_SSSE3
+#define HAS_SCALEARGBROWDOWN2_SSE2
+#define HAS_SCALEARGBROWDOWNEVEN_SSE2
+#define HAS_SCALECOLSUP2_SSE2
+#define HAS_SCALEFILTERCOLS_SSSE3
+#define HAS_SCALEROWDOWN2_SSSE3
+#define HAS_SCALEROWDOWN34_SSSE3
+#define HAS_SCALEROWDOWN38_SSSE3
+#define HAS_SCALEROWDOWN4_SSSE3
+#define HAS_SCALEADDROW_SSE2
+#endif
+
+// The following are available on all x86 platforms, but
+// require VS2012, clang 3.4 or gcc 4.7.
+// The code supports NaCL but requires a new compiler and validator.
+#if !defined(LIBYUV_DISABLE_X86) && (defined(VISUALC_HAS_AVX2) || \
+    defined(CLANG_HAS_AVX2) || defined(GCC_HAS_AVX2))
+#define HAS_SCALEADDROW_AVX2
+#define HAS_SCALEROWDOWN2_AVX2
+#define HAS_SCALEROWDOWN4_AVX2
+#endif
+
+// The following are available on Neon platforms:
+#if !defined(LIBYUV_DISABLE_NEON) && !defined(__native_client__) && \
+    (defined(__ARM_NEON__) || defined(LIBYUV_NEON) || defined(__aarch64__))
+#define HAS_SCALEARGBCOLS_NEON
+#define HAS_SCALEARGBROWDOWN2_NEON
+#define HAS_SCALEARGBROWDOWNEVEN_NEON
+#define HAS_SCALEFILTERCOLS_NEON
+#define HAS_SCALEROWDOWN2_NEON
+#define HAS_SCALEROWDOWN34_NEON
+#define HAS_SCALEROWDOWN38_NEON
+#define HAS_SCALEROWDOWN4_NEON
+#define HAS_SCALEARGBFILTERCOLS_NEON
+#endif
+
+// The following are available on Mips platforms:
+#if !defined(LIBYUV_DISABLE_MIPS) && !defined(__native_client__) && \
+    defined(__mips__) && defined(__mips_dsp) && (__mips_dsp_rev >= 2)
+#define HAS_SCALEROWDOWN2_DSPR2
+#define HAS_SCALEROWDOWN4_DSPR2
+#define HAS_SCALEROWDOWN34_DSPR2
+#define HAS_SCALEROWDOWN38_DSPR2
+#endif
+
+// Scale ARGB vertically with bilinear interpolation.
+void ScalePlaneVertical(int src_height,
+                        int dst_width, int dst_height,
+                        int src_stride, int dst_stride,
+                        const uint8* src_argb, uint8* dst_argb,
+                        int x, int y, int dy,
+                        int bpp, enum FilterMode filtering);
+
+void ScalePlaneVertical_16(int src_height,
+                           int dst_width, int dst_height,
+                           int src_stride, int dst_stride,
+                           const uint16* src_argb, uint16* dst_argb,
+                           int x, int y, int dy,
+                           int wpp, enum FilterMode filtering);
+
+// Simplify the filtering based on scale factors.
+enum FilterMode ScaleFilterReduce(int src_width, int src_height,
+                                  int dst_width, int dst_height,
+                                  enum FilterMode filtering);
+
+// Divide num by div and return as 16.16 fixed point result.
+int FixedDiv_C(int num, int div);
+int FixedDiv_X86(int num, int div);
+// Divide num - 1 by div - 1 and return as 16.16 fixed point result.
+int FixedDiv1_C(int num, int div);
+int FixedDiv1_X86(int num, int div);
+#ifdef HAS_FIXEDDIV_X86
+#define FixedDiv FixedDiv_X86
+#define FixedDiv1 FixedDiv1_X86
+#else
+#define FixedDiv FixedDiv_C
+#define FixedDiv1 FixedDiv1_C
+#endif
+
+// Compute slope values for stepping.
+void ScaleSlope(int src_width, int src_height,
+                int dst_width, int dst_height,
+                enum FilterMode filtering,
+                int* x, int* y, int* dx, int* dy);
+
+void ScaleRowDown2_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                     uint8* dst, int dst_width);
+void ScaleRowDown2_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                        uint16* dst, int dst_width);
+void ScaleRowDown2Linear_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                           uint8* dst, int dst_width);
+void ScaleRowDown2Linear_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                              uint16* dst, int dst_width);
+void ScaleRowDown2Box_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst, int dst_width);
+void ScaleRowDown2Box_Odd_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst, int dst_width);
+void ScaleRowDown2Box_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                           uint16* dst, int dst_width);
+void ScaleRowDown4_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                     uint8* dst, int dst_width);
+void ScaleRowDown4_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                        uint16* dst, int dst_width);
+void ScaleRowDown4Box_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst, int dst_width);
+void ScaleRowDown4Box_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                           uint16* dst, int dst_width);
+void ScaleRowDown34_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                      uint8* dst, int dst_width);
+void ScaleRowDown34_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                         uint16* dst, int dst_width);
+void ScaleRowDown34_0_Box_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* d, int dst_width);
+void ScaleRowDown34_0_Box_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                               uint16* d, int dst_width);
+void ScaleRowDown34_1_Box_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* d, int dst_width);
+void ScaleRowDown34_1_Box_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                               uint16* d, int dst_width);
+void ScaleCols_C(uint8* dst_ptr, const uint8* src_ptr,
+                 int dst_width, int x, int dx);
+void ScaleCols_16_C(uint16* dst_ptr, const uint16* src_ptr,
+                    int dst_width, int x, int dx);
+void ScaleColsUp2_C(uint8* dst_ptr, const uint8* src_ptr,
+                    int dst_width, int, int);
+void ScaleColsUp2_16_C(uint16* dst_ptr, const uint16* src_ptr,
+                       int dst_width, int, int);
+void ScaleFilterCols_C(uint8* dst_ptr, const uint8* src_ptr,
+                       int dst_width, int x, int dx);
+void ScaleFilterCols_16_C(uint16* dst_ptr, const uint16* src_ptr,
+                          int dst_width, int x, int dx);
+void ScaleFilterCols64_C(uint8* dst_ptr, const uint8* src_ptr,
+                         int dst_width, int x, int dx);
+void ScaleFilterCols64_16_C(uint16* dst_ptr, const uint16* src_ptr,
+                            int dst_width, int x, int dx);
+void ScaleRowDown38_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                      uint8* dst, int dst_width);
+void ScaleRowDown38_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                         uint16* dst, int dst_width);
+void ScaleRowDown38_3_Box_C(const uint8* src_ptr,
+                            ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_3_Box_16_C(const uint16* src_ptr,
+                               ptrdiff_t src_stride,
+                               uint16* dst_ptr, int dst_width);
+void ScaleRowDown38_2_Box_C(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_2_Box_16_C(const uint16* src_ptr, ptrdiff_t src_stride,
+                               uint16* dst_ptr, int dst_width);
+void ScaleAddRow_C(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+void ScaleAddRow_16_C(const uint16* src_ptr, uint32* dst_ptr, int src_width);
+void ScaleARGBRowDown2_C(const uint8* src_argb,
+                         ptrdiff_t src_stride,
+                         uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Linear_C(const uint8* src_argb,
+                               ptrdiff_t src_stride,
+                               uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Box_C(const uint8* src_argb, ptrdiff_t src_stride,
+                            uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEven_C(const uint8* src_argb, ptrdiff_t src_stride,
+                            int src_stepx,
+                            uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEvenBox_C(const uint8* src_argb,
+                               ptrdiff_t src_stride,
+                               int src_stepx,
+                               uint8* dst_argb, int dst_width);
+void ScaleARGBCols_C(uint8* dst_argb, const uint8* src_argb,
+                     int dst_width, int x, int dx);
+void ScaleARGBCols64_C(uint8* dst_argb, const uint8* src_argb,
+                       int dst_width, int x, int dx);
+void ScaleARGBColsUp2_C(uint8* dst_argb, const uint8* src_argb,
+                        int dst_width, int, int);
+void ScaleARGBFilterCols_C(uint8* dst_argb, const uint8* src_argb,
+                           int dst_width, int x, int dx);
+void ScaleARGBFilterCols64_C(uint8* dst_argb, const uint8* src_argb,
+                             int dst_width, int x, int dx);
+
+// Specialized scalers for x86.
+void ScaleRowDown2_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                         uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Linear_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown2_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Linear_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                              uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                           uint8* dst_ptr, int dst_width);
+void ScaleRowDown4_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                         uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown4_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                           uint8* dst_ptr, int dst_width);
+
+void ScaleRowDown34_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                          uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_1_Box_SSSE3(const uint8* src_ptr,
+                                ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_0_Box_SSSE3(const uint8* src_ptr,
+                                ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                          uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_3_Box_SSSE3(const uint8* src_ptr,
+                                ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_2_Box_SSSE3(const uint8* src_ptr,
+                                ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown2_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                             uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Linear_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                                   uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_Odd_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown2_Any_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Linear_Any_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                                  uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_Any_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+void ScaleRowDown2Box_Odd_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+void ScaleRowDown4_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                             uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown4_Any_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_Any_AVX2(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+
+void ScaleRowDown34_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                              uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_1_Box_Any_SSSE3(const uint8* src_ptr,
+                                    ptrdiff_t src_stride,
+                                    uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_0_Box_Any_SSSE3(const uint8* src_ptr,
+                                    ptrdiff_t src_stride,
+                                    uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_Any_SSSE3(const uint8* src_ptr, ptrdiff_t src_stride,
+                              uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_3_Box_Any_SSSE3(const uint8* src_ptr,
+                                    ptrdiff_t src_stride,
+                                    uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_2_Box_Any_SSSE3(const uint8* src_ptr,
+                                    ptrdiff_t src_stride,
+                                    uint8* dst_ptr, int dst_width);
+
+void ScaleAddRow_SSE2(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+void ScaleAddRow_AVX2(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+void ScaleAddRow_Any_SSE2(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+void ScaleAddRow_Any_AVX2(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+
+void ScaleFilterCols_SSSE3(uint8* dst_ptr, const uint8* src_ptr,
+                           int dst_width, int x, int dx);
+void ScaleColsUp2_SSE2(uint8* dst_ptr, const uint8* src_ptr,
+                       int dst_width, int x, int dx);
+
+
+// ARGB Column functions
+void ScaleARGBCols_SSE2(uint8* dst_argb, const uint8* src_argb,
+                        int dst_width, int x, int dx);
+void ScaleARGBFilterCols_SSSE3(uint8* dst_argb, const uint8* src_argb,
+                               int dst_width, int x, int dx);
+void ScaleARGBColsUp2_SSE2(uint8* dst_argb, const uint8* src_argb,
+                           int dst_width, int x, int dx);
+void ScaleARGBFilterCols_NEON(uint8* dst_argb, const uint8* src_argb,
+                              int dst_width, int x, int dx);
+void ScaleARGBCols_NEON(uint8* dst_argb, const uint8* src_argb,
+                        int dst_width, int x, int dx);
+void ScaleARGBFilterCols_Any_NEON(uint8* dst_argb, const uint8* src_argb,
+                                  int dst_width, int x, int dx);
+void ScaleARGBCols_Any_NEON(uint8* dst_argb, const uint8* src_argb,
+                            int dst_width, int x, int dx);
+
+// ARGB Row functions
+void ScaleARGBRowDown2_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                            uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Linear_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                                  uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Box_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                               uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst, int dst_width);
+void ScaleARGBRowDown2Linear_NEON(const uint8* src_argb, ptrdiff_t src_stride,
+                                  uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Box_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst, int dst_width);
+void ScaleARGBRowDown2_Any_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                                uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Linear_Any_SSE2(const uint8* src_argb,
+                                      ptrdiff_t src_stride,
+                                      uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Box_Any_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                                   uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst, int dst_width);
+void ScaleARGBRowDown2Linear_Any_NEON(const uint8* src_argb,
+                                      ptrdiff_t src_stride,
+                                      uint8* dst_argb, int dst_width);
+void ScaleARGBRowDown2Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                                   uint8* dst, int dst_width);
+
+void ScaleARGBRowDownEven_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                               int src_stepx, uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEvenBox_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                                  int src_stepx,
+                                  uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEven_NEON(const uint8* src_argb, ptrdiff_t src_stride,
+                               int src_stepx,
+                               uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEvenBox_NEON(const uint8* src_argb, ptrdiff_t src_stride,
+                                  int src_stepx,
+                                  uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEven_Any_SSE2(const uint8* src_argb, ptrdiff_t src_stride,
+                                   int src_stepx,
+                                   uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEvenBox_Any_SSE2(const uint8* src_argb,
+                                      ptrdiff_t src_stride,
+                                      int src_stepx,
+                                      uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEven_Any_NEON(const uint8* src_argb, ptrdiff_t src_stride,
+                                   int src_stepx,
+                                   uint8* dst_argb, int dst_width);
+void ScaleARGBRowDownEvenBox_Any_NEON(const uint8* src_argb,
+                                      ptrdiff_t src_stride,
+                                      int src_stepx,
+                                      uint8* dst_argb, int dst_width);
+
+// ScaleRowDown2Box also used by planar functions
+// NEON downscalers with interpolation.
+
+// Note - not static due to reuse in convert for 444 to 420.
+void ScaleRowDown2_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst, int dst_width);
+void ScaleRowDown2Linear_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                              uint8* dst, int dst_width);
+void ScaleRowDown2Box_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                           uint8* dst, int dst_width);
+
+void ScaleRowDown4_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                        uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                           uint8* dst_ptr, int dst_width);
+
+// Down scale from 4 to 3 pixels. Use the neon multilane read/write
+//  to load up the every 4th pixel into a 4 different registers.
+// Point samples 32 pixels to 24 pixels.
+void ScaleRowDown34_NEON(const uint8* src_ptr,
+                         ptrdiff_t src_stride,
+                         uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_0_Box_NEON(const uint8* src_ptr,
+                               ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_1_Box_NEON(const uint8* src_ptr,
+                               ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+
+// 32 -> 12
+void ScaleRowDown38_NEON(const uint8* src_ptr,
+                         ptrdiff_t src_stride,
+                         uint8* dst_ptr, int dst_width);
+// 32x3 -> 12x1
+void ScaleRowDown38_3_Box_NEON(const uint8* src_ptr,
+                               ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+// 32x2 -> 12x1
+void ScaleRowDown38_2_Box_NEON(const uint8* src_ptr,
+                               ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+
+void ScaleRowDown2_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst, int dst_width);
+void ScaleRowDown2Linear_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                                  uint8* dst, int dst_width);
+void ScaleRowDown2Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst, int dst_width);
+void ScaleRowDown2Box_Odd_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst, int dst_width);
+void ScaleRowDown4_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst_ptr, int dst_width);
+void ScaleRowDown4Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                             uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_0_Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                                   uint8* dst_ptr, int dst_width);
+void ScaleRowDown34_1_Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                                   uint8* dst_ptr, int dst_width);
+// 32 -> 12
+void ScaleRowDown38_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                             uint8* dst_ptr, int dst_width);
+// 32x3 -> 12x1
+void ScaleRowDown38_3_Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+// 32x2 -> 12x1
+void ScaleRowDown38_2_Box_Any_NEON(const uint8* src_ptr, ptrdiff_t src_stride,
+                               uint8* dst_ptr, int dst_width);
+
+void ScaleAddRow_NEON(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+void ScaleAddRow_Any_NEON(const uint8* src_ptr, uint16* dst_ptr, int src_width);
+
+void ScaleFilterCols_NEON(uint8* dst_ptr, const uint8* src_ptr,
+                          int dst_width, int x, int dx);
+
+void ScaleFilterCols_Any_NEON(uint8* dst_ptr, const uint8* src_ptr,
+                              int dst_width, int x, int dx);
+
+void ScaleRowDown2_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                         uint8* dst, int dst_width);
+void ScaleRowDown2Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst, int dst_width);
+void ScaleRowDown4_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                         uint8* dst, int dst_width);
+void ScaleRowDown4Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                            uint8* dst, int dst_width);
+void ScaleRowDown34_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                          uint8* dst, int dst_width);
+void ScaleRowDown34_0_Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* d, int dst_width);
+void ScaleRowDown34_1_Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* d, int dst_width);
+void ScaleRowDown38_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                          uint8* dst, int dst_width);
+void ScaleRowDown38_2_Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+void ScaleRowDown38_3_Box_DSPR2(const uint8* src_ptr, ptrdiff_t src_stride,
+                                uint8* dst_ptr, int dst_width);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_SCALE_ROW_H_

third_party/libyuv/x86_64/include/libyuv/version.h

@@ -0,0 +1,16 @@
+/*
+ *  Copyright 2012 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#ifndef INCLUDE_LIBYUV_VERSION_H_
+#define INCLUDE_LIBYUV_VERSION_H_
+
+#define LIBYUV_VERSION 1622
+
+#endif  // INCLUDE_LIBYUV_VERSION_H_

third_party/libyuv/x86_64/include/libyuv/video_common.h

@@ -0,0 +1,184 @@
+/*
+ *  Copyright 2011 The LibYuv Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS. All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+// Common definitions for video, including fourcc and VideoFormat.
+
+#ifndef INCLUDE_LIBYUV_VIDEO_COMMON_H_
+#define INCLUDE_LIBYUV_VIDEO_COMMON_H_
+
+#include "libyuv/basic_types.h"
+
+#ifdef __cplusplus
+namespace libyuv {
+extern "C" {
+#endif
+
+//////////////////////////////////////////////////////////////////////////////
+// Definition of FourCC codes
+//////////////////////////////////////////////////////////////////////////////
+
+// Convert four characters to a FourCC code.
+// Needs to be a macro otherwise the OS X compiler complains when the kFormat*
+// constants are used in a switch.
+#ifdef __cplusplus
+#define FOURCC(a, b, c, d) ( \
+    (static_cast<uint32>(a)) | (static_cast<uint32>(b) << 8) | \
+    (static_cast<uint32>(c) << 16) | (static_cast<uint32>(d) << 24))
+#else
+#define FOURCC(a, b, c, d) ( \
+    ((uint32)(a)) | ((uint32)(b) << 8) | /* NOLINT */ \
+    ((uint32)(c) << 16) | ((uint32)(d) << 24))  /* NOLINT */
+#endif
+
+// Some pages discussing FourCC codes:
+//   http://www.fourcc.org/yuv.php
+//   http://v4l2spec.bytesex.org/spec/book1.htm
+//   http://developer.apple.com/quicktime/icefloe/dispatch020.html
+//   http://msdn.microsoft.com/library/windows/desktop/dd206750.aspx#nv12
+//   http://people.xiph.org/~xiphmont/containers/nut/nut4cc.txt
+
+// FourCC codes grouped according to implementation efficiency.
+// Primary formats should convert in 1 efficient step.
+// Secondary formats are converted in 2 steps.
+// Auxilliary formats call primary converters.
+enum FourCC {
+  // 9 Primary YUV formats: 5 planar, 2 biplanar, 2 packed.
+  FOURCC_I420 = FOURCC('I', '4', '2', '0'),
+  FOURCC_I422 = FOURCC('I', '4', '2', '2'),
+  FOURCC_I444 = FOURCC('I', '4', '4', '4'),
+  FOURCC_I411 = FOURCC('I', '4', '1', '1'),
+  FOURCC_I400 = FOURCC('I', '4', '0', '0'),
+  FOURCC_NV21 = FOURCC('N', 'V', '2', '1'),
+  FOURCC_NV12 = FOURCC('N', 'V', '1', '2'),
+  FOURCC_YUY2 = FOURCC('Y', 'U', 'Y', '2'),
+  FOURCC_UYVY = FOURCC('U', 'Y', 'V', 'Y'),
+
+  // 2 Secondary YUV formats: row biplanar.
+  FOURCC_M420 = FOURCC('M', '4', '2', '0'),
+  FOURCC_Q420 = FOURCC('Q', '4', '2', '0'),  // deprecated.
+
+  // 9 Primary RGB formats: 4 32 bpp, 2 24 bpp, 3 16 bpp.
+  FOURCC_ARGB = FOURCC('A', 'R', 'G', 'B'),
+  FOURCC_BGRA = FOURCC('B', 'G', 'R', 'A'),
+  FOURCC_ABGR = FOURCC('A', 'B', 'G', 'R'),
+  FOURCC_24BG = FOURCC('2', '4', 'B', 'G'),
+  FOURCC_RAW  = FOURCC('r', 'a', 'w', ' '),
+  FOURCC_RGBA = FOURCC('R', 'G', 'B', 'A'),
+  FOURCC_RGBP = FOURCC('R', 'G', 'B', 'P'),  // rgb565 LE.
+  FOURCC_RGBO = FOURCC('R', 'G', 'B', 'O'),  // argb1555 LE.
+  FOURCC_R444 = FOURCC('R', '4', '4', '4'),  // argb4444 LE.
+
+  // 4 Secondary RGB formats: 4 Bayer Patterns. deprecated.
+  FOURCC_RGGB = FOURCC('R', 'G', 'G', 'B'),
+  FOURCC_BGGR = FOURCC('B', 'G', 'G', 'R'),
+  FOURCC_GRBG = FOURCC('G', 'R', 'B', 'G'),
+  FOURCC_GBRG = FOURCC('G', 'B', 'R', 'G'),
+
+  // 1 Primary Compressed YUV format.
+  FOURCC_MJPG = FOURCC('M', 'J', 'P', 'G'),
+
+  // 5 Auxiliary YUV variations: 3 with U and V planes are swapped, 1 Alias.
+  FOURCC_YV12 = FOURCC('Y', 'V', '1', '2'),
+  FOURCC_YV16 = FOURCC('Y', 'V', '1', '6'),
+  FOURCC_YV24 = FOURCC('Y', 'V', '2', '4'),
+  FOURCC_YU12 = FOURCC('Y', 'U', '1', '2'),  // Linux version of I420.
+  FOURCC_J420 = FOURCC('J', '4', '2', '0'),
+  FOURCC_J400 = FOURCC('J', '4', '0', '0'),  // unofficial fourcc
+  FOURCC_H420 = FOURCC('H', '4', '2', '0'),  // unofficial fourcc
+
+  // 14 Auxiliary aliases.  CanonicalFourCC() maps these to canonical fourcc.
+  FOURCC_IYUV = FOURCC('I', 'Y', 'U', 'V'),  // Alias for I420.
+  FOURCC_YU16 = FOURCC('Y', 'U', '1', '6'),  // Alias for I422.
+  FOURCC_YU24 = FOURCC('Y', 'U', '2', '4'),  // Alias for I444.
+  FOURCC_YUYV = FOURCC('Y', 'U', 'Y', 'V'),  // Alias for YUY2.
+  FOURCC_YUVS = FOURCC('y', 'u', 'v', 's'),  // Alias for YUY2 on Mac.
+  FOURCC_HDYC = FOURCC('H', 'D', 'Y', 'C'),  // Alias for UYVY.
+  FOURCC_2VUY = FOURCC('2', 'v', 'u', 'y'),  // Alias for UYVY on Mac.
+  FOURCC_JPEG = FOURCC('J', 'P', 'E', 'G'),  // Alias for MJPG.
+  FOURCC_DMB1 = FOURCC('d', 'm', 'b', '1'),  // Alias for MJPG on Mac.
+  FOURCC_BA81 = FOURCC('B', 'A', '8', '1'),  // Alias for BGGR.
+  FOURCC_RGB3 = FOURCC('R', 'G', 'B', '3'),  // Alias for RAW.
+  FOURCC_BGR3 = FOURCC('B', 'G', 'R', '3'),  // Alias for 24BG.
+  FOURCC_CM32 = FOURCC(0, 0, 0, 32),  // Alias for BGRA kCMPixelFormat_32ARGB
+  FOURCC_CM24 = FOURCC(0, 0, 0, 24),  // Alias for RAW kCMPixelFormat_24RGB
+  FOURCC_L555 = FOURCC('L', '5', '5', '5'),  // Alias for RGBO.
+  FOURCC_L565 = FOURCC('L', '5', '6', '5'),  // Alias for RGBP.
+  FOURCC_5551 = FOURCC('5', '5', '5', '1'),  // Alias for RGBO.
+
+  // 1 Auxiliary compressed YUV format set aside for capturer.
+  FOURCC_H264 = FOURCC('H', '2', '6', '4'),
+
+  // Match any fourcc.
+  FOURCC_ANY = -1,
+};
+
+enum FourCCBpp {
+  // Canonical fourcc codes used in our code.
+  FOURCC_BPP_I420 = 12,
+  FOURCC_BPP_I422 = 16,
+  FOURCC_BPP_I444 = 24,
+  FOURCC_BPP_I411 = 12,
+  FOURCC_BPP_I400 = 8,
+  FOURCC_BPP_NV21 = 12,
+  FOURCC_BPP_NV12 = 12,
+  FOURCC_BPP_YUY2 = 16,
+  FOURCC_BPP_UYVY = 16,
+  FOURCC_BPP_M420 = 12,
+  FOURCC_BPP_Q420 = 12,
+  FOURCC_BPP_ARGB = 32,
+  FOURCC_BPP_BGRA = 32,
+  FOURCC_BPP_ABGR = 32,
+  FOURCC_BPP_RGBA = 32,
+  FOURCC_BPP_24BG = 24,
+  FOURCC_BPP_RAW  = 24,
+  FOURCC_BPP_RGBP = 16,
+  FOURCC_BPP_RGBO = 16,
+  FOURCC_BPP_R444 = 16,
+  FOURCC_BPP_RGGB = 8,
+  FOURCC_BPP_BGGR = 8,
+  FOURCC_BPP_GRBG = 8,
+  FOURCC_BPP_GBRG = 8,
+  FOURCC_BPP_YV12 = 12,
+  FOURCC_BPP_YV16 = 16,
+  FOURCC_BPP_YV24 = 24,
+  FOURCC_BPP_YU12 = 12,
+  FOURCC_BPP_J420 = 12,
+  FOURCC_BPP_J400 = 8,
+  FOURCC_BPP_H420 = 12,
+  FOURCC_BPP_MJPG = 0,  // 0 means unknown.
+  FOURCC_BPP_H264 = 0,
+  FOURCC_BPP_IYUV = 12,
+  FOURCC_BPP_YU16 = 16,
+  FOURCC_BPP_YU24 = 24,
+  FOURCC_BPP_YUYV = 16,
+  FOURCC_BPP_YUVS = 16,
+  FOURCC_BPP_HDYC = 16,
+  FOURCC_BPP_2VUY = 16,
+  FOURCC_BPP_JPEG = 1,
+  FOURCC_BPP_DMB1 = 1,
+  FOURCC_BPP_BA81 = 8,
+  FOURCC_BPP_RGB3 = 24,
+  FOURCC_BPP_BGR3 = 24,
+  FOURCC_BPP_CM32 = 32,
+  FOURCC_BPP_CM24 = 24,
+
+  // Match any fourcc.
+  FOURCC_BPP_ANY  = 0,  // 0 means unknown.
+};
+
+// Converts fourcc aliases into canonical ones.
+LIBYUV_API uint32 CanonicalFourCC(uint32 fourcc);
+
+#ifdef __cplusplus
+}  // extern "C"
+}  // namespace libyuv
+#endif
+
+#endif  // INCLUDE_LIBYUV_VIDEO_COMMON_H_

third_party/maplibre-native-qt/aarch64

@@ -1 +0,0 @@
-larch64/

third_party/maplibre-native-qt/aarch64/include/QMapLibre/Export

@@ -0,0 +1 @@
+#include "export_core.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/LayerParameter

@@ -0,0 +1 @@
+#include "layer_parameter.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/Map

@@ -0,0 +1 @@
+#include "map.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/QMapLibre

@@ -0,0 +1 @@
+#include "qmaplibre"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/Settings

@@ -0,0 +1 @@
+#include "settings.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/SourceParameter

@@ -0,0 +1 @@
+#include "source_parameter.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/StyleParameter

@@ -0,0 +1 @@
+#include "style_parameter.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/Types

@@ -0,0 +1 @@
+#include "types.hpp"

third_party/maplibre-native-qt/aarch64/include/QMapLibre/Utils

@@ -0,0 +1 @@
+#include "utils.hpp"