Stock rk.lagging fires at 11.1ms (90% of 10ms interval), which the
Hyundai CAN load routinely crosses during normal driving as carstate
parses 50-200 msgs/sec. That's normal, not a fault — the same code
behaved the same way at the fork baseline; we just made it visible with
the LAG overlay.
50Hz effective control is still tighter than any human reaction loop.
rk.lagging remains wired to the defensive skip paths (secondary camera
and radar checks) at the original tighter threshold, so we still avoid
false-alarming dependent events when briefly overloaded.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Two related fixes for the post-engage lag spike:
1. controlsdLagging suppressed during lat_engage_suppress window.
Ratekeeper.lagging triggers when avg cycle duration over 100 cycles
exceeds 11.1ms (90% of 10ms budget). The modeld 10→20fps ramp causes
a legitimate transient where downstream services (plannerd, locationd,
calibrationd, paramsd) each drain 2x the message rate, briefly pushing
avg cycle time past the threshold. The underlying system isn't broken —
it's correctly absorbing a scheduled workload transition.
2. frogpilotCarControl now sends only on change (+ 1Hz keepalive) instead
of every 10ms. The message has 3 bool fields, of which speedLimitChanged
code is entirely commented out, trafficModeActive flips only on UI
button press, and alwaysOnLateral changes only on cruise/gear/brake
edges. plannerd doesn't include frogpilotCarControl in its all_checks
list so stale-freq detection isn't a concern. Saves ~7ms/sec of
capnp build + zmq send work.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Previously ran unpinned (affinity mask 0xff) across all 8 cores. When it
landed on core 4 (controlsd) or 5 (plannerd/radard) or 7 (modeld), its
70MB/s frame copies and MP4 muxing caused cache/memory-bandwidth
contention with the RT-pinned processes. SCHED_FIFO prevented direct
preemption but not the cache thrash.
OMX offloads actual H.264 work to hardware so the main thread is
lightweight — fine on the little cluster.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
System health overlay:
- Lower-right 5-metric panel: LAG (controlsState.cumLagMs), DROP
(modelV2.frameDropPerc), TEMP (deviceState.maxTempC), CPU (max core of
deviceState.cpuUsagePercent), MEM (deviceState.memoryUsagePercent)
- Color-coded white→yellow→red by severity (LAG: 50/200ms, DROP: 5/15%,
TEMP: 75/88°C, CPU: 75/90%, MEM: 70/85%)
- Toggle in ClearPilot → Debug → "System Health Overlay"
- New param ClearpilotShowHealthMetrics, PERSISTENT (disk, survives
reboots), default false — re-polled every ~2s so toggle takes effect
without process restart
- InterFont(90, Bold) to match speed limit numeric styling, 30px margin,
40px between rows, black rounded background
Nightrider center lane path (the "tire track" polygon from
scene.track_vertices) is now drawn at 2x the width of other lines —
highlights the planned path distinctly against the otherwise stark
outline-only rendering.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Audit of post-fork param additions found CarCruiseDisplayActual was
written every CAN cycle (gated) but only consumed by hyundaicanfd.py::
create_buttons_alt, which has `return` on line 1 and no active callers.
Write was pure waste. Removed registration, write path, cache field,
and the dead read.
Also dropped the now-unused `from openpilot.common.params import Params`
in hyundaicanfd.py.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Reduced-rate modeld path now branches on IsDaylight:
- daylight: skip 1/2 frames → 10fps (better model responsiveness when
lighting gives the net more signal)
- night: skip 4/5 frames → 4fps (unchanged, conservative for power)
IsDaylight is already in /dev/shm (memory) via gpsd.py. Gated the
IsDaylight write on change — it flips twice a day, no reason to rewrite
every 30s. GPS polling bumped from 1Hz → 2Hz.
ModelFps publishes "10" / "4" / "20" so longitudinal_planner's dt and
FCW-threshold scaling (if re-enabled) still track actual rate.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
create_steering_messages was constructing a new Params("/dev/shm/params")
object and reading no_lat_lane_change on every CAN steering message build
— i.e. 100 allocations + 100 file reads per second. Now the Params
instance lives on CarController, and the value is read once per update()
cycle and passed as a parameter.
Audited all other hyundai CAN-FD integration code for similar patterns:
- carstate.py — already fixed (previous commit)
- carcontroller.py — other Params references are all in commented-out code
- hyundaicanfd.py::create_buttons_alt — dead code (early return), so the
Params read there never executes; left as-is
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Speed limit ≤25 mph now allows +8 over before warning (e.g. limit 25 →
33 is ok, warn at 34). Existing tiers unchanged: ≥50 → +9 ok warn at +10,
26-49 → +6 ok warn at +7.
Also gate all 7 speed_logic param writes on change (same pattern as the
earlier carstate/controlsd perf fix). Called at 2Hz so not as hot, but
unit/is_metric never change mid-drive and the cruise warning rarely
flips — no reason to thrash /dev/shm on every update.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Python Params uses snake_case; the C++ camelCase call raised
AttributeError, killing thermald_thread at the exact moment of shutdown.
Result: DoShutdown never got set, the 10-minute timer "worked" once (set
DashcamShutdown=True) and then thermald died silently. Device kept
draining the battery instead of powering down.
Caught because CLAUDE.md specifically flags this pattern as a common
source of silent failures between C++ and Python.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Tucson's radar-based collision warning is more reliable than the comma
model/planner FCW and was producing false positives. Single-user fork in
a single car, so no need to keep both.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
py-spy showed per-cycle atomic param writes were the dominant cost. Each
put() is mkstemp+fsync+flock+rename+fsync_dir — fine when rare, ruinous at
100Hz. At park with no state changes, these writes were running anyway and
the flock contention was poisoning the whole system.
carstate.py (update + update_canfd): CarSpeedLimit, CarIsMetric,
CarCruiseDisplayActual were written every CAN update. Now cached and
written only on change.
controlsd.py: same fix for LatRequested and no_lat_lane_change. Also
throttle the sentry crash-file stat() from 100Hz to 1Hz.
Also: suppress locationdTemporaryError/paramsdTemporaryError/posenetInvalid
on lat engage (same 2s window as commIssue), and tie suppression to the
LatRequested edge instead of CC.latActive (fires immediately, not after
the 250ms ramp-up delay).
Also: reset Ratekeeper when it falls >1s behind — the ~6s fingerprinting
stall at startup was poisoning the lag metric for the entire session.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Decouples "tell modeld to go fast" from "steering actually active":
- New LatRequested memory param — controlsd writes when lat would be active
- modeld reads LatRequested (not carControl.latActive) for FPS decision,
so it switches to 20fps immediately on engage request
- controlsd delays CC.latActive becoming true by 250ms (5 frames @ 20fps)
after LatRequested goes true, giving downstream services
(longitudinalPlan, liveCalibration, etc.) time to stabilize at the new rate
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fan controller: allow full 100% fan when offroad temp >= 75°C (startup cooling)
- ModelFps memory param: modeld publishes actual FPS (20 or 4) so downstream
consumers can adjust frame-rate-dependent logic
- Longitudinal planner: dynamically adjusts dt and v_desired_filter based on
ModelFps; FCW crash_cnt threshold scales with FPS to maintain consistent
0.15s trigger window at both 20fps and 4fps
- controlsd: suppress commIssue alerts for 2s after lateral control engages
(FPS transition from 4->20 causes transient freq check failures)
- Shutdown timer: hardcoded to 10 minutes (was 45min via FrogPilot param),
screen taps reset the countdown via ShutdownTouchReset memory param,
removed Shutdown Timer UI selector from ClearPilot menu
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
dashcamd now waits for valid system time + GPS fix + drive gear before
starting a trip. Returns to waiting state on 10-min park timeout or
ignition off. Publishes DashcamState and per-trip DashcamFrames to
memory params. Status window shows stopped/waiting/recording states.
Updated CLAUDE.md with current display mode behavior, OmxEncoder port
details, speed limit warning thresholds, and dashcam param docs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- OMX_Init/OMX_Deinit managed per encoder instance lifecycle
- Proper error handling in constructor, encoder_open, encoder_close
- Null guards on done_out.pop() and handle in destructor
- Codec config written directly to codecpar (no codec_ctx)
- ffmpeg faststart remux on segment close
- Crash handler in dashcamd for diagnostics
- DashcamFrames param for live frame count in status window
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Reset OMX subsystem (Deinit/Init) on dashcamd startup to clear stale
encoder state from previous unclean exits
- Validate OMX output buffers before memcpy to prevent segfault
- Validate VisionBuf frame data before encoding
- Add dashcam row to status window showing recording state and disk usage
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Removed nightrider exception that kept onroad UI visible in park.
Shifting to park from nightrider mode now auto-switches to screen off.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Tapping the touchscreen while in display mode 3 (screen off) resets
ScreenDisplayMode to 0 (auto-normal) and wakes the display.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
updateWakefulness was overriding display power every frame when ignition
was on, fighting the screen-off set by home.cc. Now respects
ScreenDisplayMode 3 unconditionally. Also auto-resets to mode 0 when
shifting into drive from screen-off.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Plays a ding via soundd when the cruise warning sign becomes visible
(cruise set speed out of range vs speed limit) or when the speed limit
changes while the warning sign is already showing. Max 1 ding per 30s.
Ding is mixed independently into soundd output at max volume without
interrupting alert sounds. bench_cmd ding available for manual trigger.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Cruise warning sign appears above speed limit sign when cruise set
speed is too far from the speed limit:
- Red (over): cruise >= limit + 10 (if limit >= 50) or + 5 (if < 50)
- Green (under): cruise <= limit - 5
- Only when cruise active (not paused/disabled) and limit >= 20
- Nightrider mode: colored text/border on black background
Speed limit sign enlarged 5%. 20px gap between signs. Bench mode
gains cruiseactive command (0=disabled, 1=active, 2=paused).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New speed_logic.py module converts raw CAN speed limit and GPS speed
into display-ready params. Called from controlsd (live) and
bench_onroad (bench) at ~2Hz. UI reads params to render:
- Current speed (top center, hidden when 0 or no GPS)
- MUTCD speed limit sign (lower-left, normal + nightrider styles)
- Unit-aware display (mph/kph based on CAN DISTANCE_UNIT)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Standstill quiet mode was clamped to 0-10% which is dangerously low
under sustained load. Raised to 0-30%. Bench mode now forces 30-100%
onroad fan range regardless of standstill to prevent overheating
during bench testing.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
manage_athenad was calling launcher() with only 2 args but the
per-process logging changes added a required log_path parameter.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add build_preflight.sh to create obj/ dirs that git can't track (body/board/obj, panda/board/obj)
- Wire preflight into build_only.sh and launch_chffrplus.sh
- Restore missing third_party binaries (libyuv, snpe, acados, maplibre) that were text pointers
- Remove dead Qt5WebEngineWidgets dependency from UI SConscript
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- modeld: full 20fps (lat active), 4fps (driving no lateral), 0fps
(standstill). Standby timestamp written in both standby and 4fps modes
to suppress transient errors on engagement transition
- tlog: all calls commented out (was causing 100Hz CPU load in controlsd
and carstate). tlog client now checks TelemetryEnabled param before
sending — zero cost when disabled
- dashcamd: wait for valid frame dimensions on startup (fix SIGSEGV),
always_run (manages own trip lifecycle)
- Fan: driving range 15-100%
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Comment out all tlog() calls in controlsd (100Hz) and carstate (100Hz)
— was causing controlsd to lag from JSON serialization + ZMQ overhead
- tlog() now checks TelemetryEnabled memory param (1/sec file read),
returns immediately when disabled — zero cost when telemetry is off
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- modeld: enter standby when latActive=false (not just standstill),
exception for lane changes (no_lat_lane_change). Fix Python capnp
property access (.latActive not getLatActive())
- controlsd: move model_suppress computation early, suppress radarFault,
posenetInvalid, locationdTemporaryError, paramsdTemporaryError during
model standby + 2s grace period. All cascade from modeld not publishing
- dashcamd: always_run (manages own trip lifecycle), wait for valid frame
dimensions before encoding (fix SIGSEGV on early start)
- Fan: driving range 15-100% (was 30-100%)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Telemetry status bar in onroad UI: temp, fan %, model FPS, standstill
- Fix paramsMemory usage: Params("/dev/shm/params") not "/dev/shm/params/d"
- Telemetry/VPN toggles use ToggleControl with manual paramsMemory writes
- TelemetryEnabled/VpnEnabled registered PERSISTENT, written to memory path
- GPS telemetry: telemetryd subscribes to gpsLocation at 1Hz via cereal
- Nightrider: force CameraWidget bg black to eliminate color bleed border
- Suppress "Always On Lateral active" status bar message
- Re-enable gpsd and dashcamd
- CLAUDE.md: document memory params pattern, speed_limit.calculated usage
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Nightrider: lines 1px wider (3px outline), engagement border hidden,
planner lines hidden when disengaged, stay on onroad view in park
- Normal mode only: return to ready splash on park
- Ready text sprite at native 1x size
- Nice monitor: keeps claude processes at nice 19, runs every 30s
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Fix controlsd crash: self.state.name AttributeError when state is int
- Move telemetry tlog import to module level in carstate.py (was per-frame)
- Remove FrogPilot screen recorder from UI (was crashing OMX on init)
- Ready screen: boot logo background, 8-bit READY! sprite, error states
(panda not connected, car not recognized) with 10s startup grace period
- ClearPilot menu: always opens to General, QButtonGroup for sidebar,
System Status uses ButtonControl, VPN toggle with process control
- Sidebar hidden on construction (no flash before splash)
- Status window: threaded data collection (QtConcurrent), panda detection
via scene.pandaType (SPI, not USB), only refreshes when visible
- VPN: moved to system/clearpilot/, SIGTERM graceful shutdown, keepalive
ping through tunnel, killall openvpn on disable, launched from
launch_openpilot.sh instead of continue.sh
- Disable gpsd and dashcamd temporarily for perf testing
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
New ScreenDisplayMode param (fixes ScreenDisaplayMode typo):
0=auto-normal, 1=auto-nightrider, 2=normal, 3=screen-off, 4=nightrider
Nightrider mode: black background (no camera feed), path/lane lines
drawn as 2px outlines only. Auto mode uses NOAA solar position calc
in gpsd to switch between day/night based on GPS lat/lon and UTC time.
First calc on GPS fix, then every 30 seconds.
Button cycle onroad: 0→4, 1→2, 2→3, 3→4, 4→2 (never back to auto).
Offroad: any→3, 3→0. bench_cmd debugbutton simulates the button press.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Added brakePressed to cruise group, prev_cruise_button and
prev_main_button to buttons group in carstate telemetry. New "engage"
group in controlsd logs state machine state, enabled/active flags, and
stock cruise state every frame for tracing engagement desync bugs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Speed indicator now uses gpsLocation speed (MPH) instead of carState
vEgo. Hides completely when no GPS fix is available. Added gpsLocation
to UI SubMaster subscriptions.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Each MP4 segment gets a companion .srt file with 1Hz entries containing
speed (MPH), lat/lon coordinates, and UTC timestamp from gpsLocation
cereal messages. Falls back to "No GPS" when fix is unavailable.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Replace Home panel with General: status, reset calibration, shutdown
timer, reboot/soft reboot/power off. Add Network tab (stock networking
minus APN). Remove system settings access — ClearPilot menu is now the
only settings interface. build_only.sh now auto-chowns before build.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Dashcam recording now organized by trip in /data/media/0/videos/YYYYMMDD-HHMMSS/.
Starts recording immediately on launch (with 10-min idle timer), transitions to
continuous recording when drive gear detected. New trip on every ignition cycle.
Graceful shutdown via DashcamShutdown param with 15s ack timeout in thermald.
- Bitrate reduced to 2500 kbps (was 4 Mbps)
- Trip state machine: IDLE → RECORDING ↔ IDLE_TIMEOUT → TRIP_ENDED
- Deleter: trip-aware deletion (oldest trip first, then segments within active trip)
- camerad changed to always_run (was driverview) so dashcam works offroad
- DashcamShutdown param for graceful close before device power-off
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
GPS: fix AT response parsing (strip mmcli `response: '...'` wrapper),
fix capnp field names (horizontalAccuracy, hasFix), set system clock
directly from first GPS fix when time is invalid, kill system gpsd on
startup.
Logging: replace module-level log dir creation with init_log_dir()
called from manager_init(). Active session always at /data/log2/current
(real dir until time resolves, then symlink to timestamped dir). Add
LogDirInitialized param. Redirect both stdout+stderr for all processes.
Also: thorough process cleanup in launch scripts, dashcamd binary,
CLAUDE.md updates for GPS/telemetry/bench/logging docs.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Device has no u-blox chip (/dev/ttyHS0 missing). GPS is via the Quectel
EC25 LTE modem. Uncommented qcomgpsd in process_config.
GPS hardware confirmed working — modem returns fix via AT+QGPSLOC with
7 satellites, 1m accuracy. However qcomgpsd's diag interface reader
appears to stall after setup — the cereal gpsLocationExternal message
is not being populated. The diag subprocess exits as a zombie. Needs
further investigation into the ModemDiag interface.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Logs high-value CAN bus data every frame in update_canfd():
- car: vEgo, aEgo, steering angle, gear, brake/gas, blinkers, standstill
- cruise: enabled, speed, ACCMode, VSetDis, aReq, distance setting, lead dist
- speed_limit: all 3 CLUSTER_SPEED_LIMIT values, school zone, chimes,
calculated speed limit, metric flag
- buttons: cruise buttons, main button, LKAS, main_enabled state
Data flows through the diff-based telemetry logger (only changed values
written to CSV) when TelemetryEnabled param is set.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Unblocked thermald and camerad — thermald manages CPU cores and reads
fake pandaStates for ignition, bench no longer publishes deviceState
- camerad starts with live camera feed on bench
- Force nvg->update() every frame for HUD repaint without camera dependency
- Blue blinking telemetry circle uses getBool pattern
- camerad debug logging for startup diagnostics
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- SIGSEGV/SIGABRT crash handler in ui/main.cc prints stack trace to stderr
- Fixed onroad crash: guard update_model() against empty model position data
(was dereferencing end()-1 on empty list when modeld not running in bench)
- Status window: added device temperature and fan speed
- Interactive timeout returns to splash/onroad (not ClearPilotPanel)
- bench_cmd dump detects crash loops via UI process uptime check
- bench_cmd wait_ready timeout increased to 20s
- Restored camerad to bench ignore list (not needed for UI testing)
- Updated CLAUDE.md with crash debugging procedures
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Bench mode (--bench flag):
- bench_onroad.py publishes fake vehicle state as managed process
- manager blocks real car processes (pandad, thermald, controlsd, etc.)
- bench_cmd.py for setting params and querying UI state
- BLOCKER: UI segfaults (SIGSEGV) when OnroadWindow becomes visible
without camera frames — need to make CameraWidget handle missing
VisionIPC gracefully before bench drive mode works
ClearPilot menu:
- Replaced grid launcher with sidebar settings panel (ClearPilotPanel)
- Sidebar: Home, Dashcam, Debug
- Home panel: Status and System Settings buttons
- Debug panel: telemetry logging toggle (ParamControl)
- Tap from any view (splash, onroad) opens ClearPilotPanel
- Back button returns to splash/onroad
Status window:
- Live system stats refreshing every 1 second
- Storage, RAM, load, IP, WiFi, VPN, GPS, time, telemetry status
- Tap anywhere to close, returns to previous view
- Honors interactive timeout
UI introspection RPC:
- ZMQ REP server at ipc:///tmp/clearpilot_ui_rpc
- Dumps full widget tree with visibility, geometry, stacked indices
- bench_cmd dump queries it, detects crash loops via process uptime
- ui_dump.py standalone tool
Other:
- Telemetry toggle wired to TelemetryEnabled param with disk space guard
- Telemetry disabled on every manager start
- Blinking red circle on onroad UI when telemetry recording
- Fixed showDriverView overriding park/drive transitions every frame
- Fixed offroadTransition sidebar visibility race in MainWindow
- launch_openpilot.sh: cd to /data/openpilot, --bench flag support
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- telemetry.py: client library, tlog(group, data) sends JSON over ZMQ PUSH
- telemetryd.py: collector process, diffs against previous state per group,
writes only changed values to /data/log2/{session}/telemetry.csv
- Registered as always-run managed process in process_config.py
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Per-process stderr logging to /data/log2/{session}/ with time-safe
directory naming (boot-xxx renamed once GPS/NTP sets clock)
- Aggregate session.log with major events (start/stop, transitions)
- 30-day log rotation cleanup on manager startup
- build_only.sh: compile without starting manager, non-blocking error
display, kills stale processes
- build.py: copies updated spinner binary after successful build
- Onroad park mode: show splash screen when car is on but in park,
switch to camera view when shifted to drive, honor screen on/off
- Spinner: full-screen boot logo background from /usr/comma/bg.jpg
with white progress bar overlay
- Boot logo: auto-regenerate when boot_logo.png changes, 140% scale
- launch_openpilot.sh: cd to /data/openpilot for reliable execution
- launch_chffrplus.sh: kill stale text error displays on startup
- spinner shell wrapper: prefer freshly built _spinner over prebuilt
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
